New Circuits Products

Microprocessor Supervisor has integrated reset timing.

Supplied in 3 x 3 mm, 10-pin -µMAX-® package, MAX16055 comes in 10 versions with different thresholds and supply tolerances. Whenever one of 6 monitored voltages falls below its threshold, open-drain reset output asserts and remains asserted for at least 140 msec after all 6 voltages exceed their respective thresholds. Reset output is internally pulled up to VCC, eliminating need for external...

IC offers 10-bit programmable gamma reference system.

Model MAX9669 includes 16 programmable gamma-correction outputs and 1 voltage reference. It also integrates nonvolatile multiple-time programmable memory which supports up to 100 write operations of gamma and VCOM values to chip. On-chip, 10-bit DAC contains low-pass filter that reduces horizontal line frequency noise by 50 dB. Unit is available in 5 x 5 mm, 28-pin TQFN-EP package and is...

Power IC enables operating frequencies in excess of 1 MHz.

Available in 2 versions tailored for 3.3 or 5 V controllers, Model SiC769 integrates high-side and low-side n-channel MOSFETs, plus MOSFET driver IC in single PowerPAK-® MLF6x6 package. Device is fully compliant with DrMOS specification for voltage regulators in CPU-based systems. Operating from input voltage of 3-16 V, unit delivers up to 35 A continuous output current. Integrated power MOSFETs...

DC-DC Converters deliver 94% efficiency at 1 MHz.

Operating from 500 kHz to 2 MHz switching frequency, MAX15038 and MAX15039 deliver up to 4 and 6 A output current, respectively, and enable implementation of all-ceramic capacitor designs. User-selectable, fixed-frequency PWM and pulse-skipping modes ensure optimal efficiency during light loads. Housed in 4 x 4 mm TQFN package, synchronous converters operate from 2.9-5.5 V supply and provide -

Copper Infiltration Using Wrought Wire Infiltrant - Process and Productivity Improvements for Automotive Components

A comprehensive exploration of a new wrought copper alloy wire used in powder metallurgical infiltration methods.

Programmable Logic Devices come in 0.8 mm pitch BGA package.

Available in 0.8 mm pitch, 14 x 14 mm, 256-pin Chip-Array BGA package with up to 211 user I/O, Mach XO640, XO1200, and XO2280 enable implementation of board space-constrained designs. Units include embedded memory, built-in PLLs, multi-voltage I/O, remote field upgrade technology, and low-power sleep mode. PLDs are suited for general purpose I/O expansion, control, bus bridging, and power-up...

Silicon Tuner supports digital-terrestrial TV standard.

Able to simplify designs, STV4100 is supplied in 5 x 5 mm QFN package, eliminates need for up to 30 separate components, and does not require any adjustment. Single-chip DVB-T silicon tuner combines with ST demodulator and decoder ICs to deliver complete set-top box chipset. It meets all DVB-T standards, including DTG, Nordig Unified v2.0, and Digitenne, and has operating current of 600 mA that...

Radio Tuner IC receives digital audio and FM signals.

Sensitive to FM, VHF, and L-band frequency ranges, MAX2172 features FM sensitivity of -111 dBm. Integrated tracking filter eliminates interference between bands and unit includes mixers and synthesized local oscillator. Received-signal-strength indicator provides -

Video Filter Amplifier offers short-to-battery protection.

Designed to withstand harsh operating conditions in automotive applications, MAX9532 drives standard-definition video connections to in-dash or rear-seat automotive display. Unit integrates short-to-battery protection up to 18 V on video output, eliminating need for external series resistor. Operating from 2.7-3.6 V supply, amplifier employs DirectDrive-® technology, which automatically removes...

Front-End IC targets ultrasound imaging equipment.

Combining active-input-termination LNA, VGA, anti-alias filter, and I/Q mixer continuous-wave Doppler beamformer in one monolithic device, Model MAX2078 supports input impedances of 50, 100, 200, and 1,000 W. Unit can achieve full receiver noise figure of 2.4 dB with 200 W input impedance termination, while consuming less than 65 mW per channel. Device boasts SNR of 140 dBc/Hz at 1 kHz from 5 MHz...

Siemens Enterprise Communications Manufacturing GmbH Benefits from UPM Raflatac's RFID Tags for Electronic Tagging

(UPM Raflatac, Tampere, 5 August, 2009, at 13:00) - Siemens Enterprise Communications Manufacturing GmbH, has gained considerable savings in both time and costs in various steps in their production and logistics chain since implementing an RFID solution in 2007. Simultaneously, a giant step has also been gained in the fight against counterfeiters of the high-end business telephones in their...