Circuits

Gate Driver ICs drive power MOSFETs and IGBTs.

Suited for high-frequency and high-power applications, IXD_602 Series features 2 outputs, each capable of sourcing and sinking 2 A of peak current while producing rise and fall times of less than 10 ns. To drive higher current power MOSFETs and IGBTs, Series IXD_614 can source and sink 14 A of peak current. Both families operate from 4.5-35 V supply and are specified over automotive temperature...

Read More »
DC/DC LED Drivers provide 40 VIN transient protection.

DC/DC LED Drivers provide 40 VIN transient protection.

Capable of operating as boost, buck, or buck-boost with 3-30 V input voltage range, uModule® LTM8042 and LTM8042-1 drive strings of up to 8 white LEDs or 9 red LEDs. Model LTM8042 sources up to 1 A of current, while Model LTM8042-1 sources up to 350 mA. Each features True Color PWM(TM) dimming with 3,000:1 ratio or analog dimming with 10:1 ratio. Housed in 9 x 15 x 2.8 mm LGA package, switching...

Read More »
SMT packaged GaAs MIC Chipset suits point-to-point radio market.

SMT packaged GaAs MIC Chipset suits point-to-point radio market.

Operating at 38 GHz, SMT packaged GaAs MIC chipset includes up converter with mixer, RF buffer, LO buffer, and LO doubler. Unit integrates VCO that achieves low phase noise performance and exhibits low performance variation over temperature. Also incorporated are driver amplifier and power amplifier with detector on-chip, receiver with low noise amplifier, and multiplier that combines active...

Read More »
DC-DC Converters mount vertically or horizontally on board.

DC-DC Converters mount vertically or horizontally on board.

With TO-220-compatible footprint, 1 A/24 Va Buck-Boost DC-DC Converter accepts 6-70 V input and delivers constant output of 3, 5, 9, 12, 15, 24, or 48 Vdc. Cool running unit eliminates heat sink and offers +2% output voltage tolerance with 60 DB typical line and load rejection. Measuring 1 x 1 x 0.55 in., short circuit proof converter operates in ambient temperatures up to 85°C and is suited for...

Read More »
Monolithic Power Management IC enhances multimedia processing.

Monolithic Power Management IC enhances multimedia processing.

Supplied in 8 x 8 x 0.85 mm QFN package that enables 4-layer PCB manufacturing, WM8325 serves as power management subsystem for portable multimedia applications. It has 4 programmable DC/DC converters, including one that delivers up to 2.5 A, and 11 LDO regulators. On-chip regulator provides power for always-on PMIC functions and also offers autonomous backup battery switchover. Other features...

Read More »

MMIC Core Chip includes transmit and receive modes.

Operating from 2.5-4 GHz, Model XZ1001-BD consists of integrated transmit/receive switches, low noise amplifier, 6-bit phase shifter, 6-bit attenuator, and drive amplifier. Gallium arsenide core chip, featuring compensated on-chip gate bias, delivers 33 dB transmit/receive gain, 20 dBm transmit/receive P1dB, and 2.5 dB receive noise figure. MMIC chip is suited for both military and weather phased...

Read More »

Chip allows operation of 3 GSM SIM cards simultaneously.

Compliant with multiple SIM card standards, triple SIM in single chip solution SC6600L7 allows running of 3 GSM SIM cards simultaneously on stand by with only one set of baseband and RF. It integrates 3 SIM engine processors and 3 controllers, triple SIM protocol stack DSP, and graphical user interface.

Read More »

LED Backlight Drivers conserve power in handheld devices.

Equipped with 2 linear LDO voltage regulators, AAT2868 and AAT2869 are 1x/1.5x dual-mode, charge pump-based, white LED backlight drivers that offer content adaptive brightness control (CABC) or dynamic backlight control (DBC) for reduced power consumption. While AAT2868 provides PWM dimming input for external brightness and fading control, AAT2869 incorporates AS2C-based, auto-dimming and fade...

Read More »

16-bit ADC offers sampling rate of 250 MS/sec.

Featuring on-chip IF sampling circuit and buffered analog inputs, Model AD9467 offers 16-bit resolution, spurious-free dynamic range up to 100 dBFs, and signal-to-noise ratio performance of 76.4 dBFS. Signal bandwidths up to 300 MHz enable advances in radar systems, spectrum analyzers, and multi-carrier, multi-mode receiver designs for wireless infrastructure. Housed in Pb-free, 72-lead, LFCSP,...

Read More »

All Topics