Circuits

Circuits

ASIC Protyping Service covers CMOS, high-voltage, Flash, and RF.

Multi-Project Wafer (MPW) services include 6 prototyping runs in 0.18 Â-µm CMOS (C18) process and 4 MPW runs in 0.18 µm high-voltage CMOS (H18) technology. H18 process technology is based on IBM 0.18 µm CMOS CMOS7RF process and is suited for smart power management ICs, while 0.35 µm specialty processes from TSMC is suited for power management products and display...

Read More »
DC to DC Power Supplies (Converters)

Electronica 2010: Murata Debuts Technologies to Shrink Footprint and Increase Functionality and Battery Life of Mobile Devices

Hoofddorp, Netherlands: Murata has debuted three energy efficient technologies aimed at increasing mobile device functionality and reducing size while extending battery life at Electronica 2010 in Munich, Germany. The company has announced a tiny buck converter module to help reduce footprint, a new super-capacitor technology to help provide peak power requirements and a highly integrated...

Read More »
Electronic Converters

Low-Power, 16-Bit ADCs reduce energy draw to 185 mW.

Models LTC2165 and LTC2185 are comprised of single- and 2-channel simultaneous sampling parallel ADCs, respectively. They offer choice of full-rate CMOS or DDR CMOS/LVDS digital outputs with programmable digital output timing, programmable LVDS output current, and optional LVDS output termination. Also available, LTC2195 series includes 2-channel, simultaneous sampling ADCs with serial LVDS...

Read More »
Circuits

STMicroelectronics Confirms iDP-LVDS 'Bridge Chips' Support Cinema Mode Format

Robust Internal DisplayPort (iDP(TM)) interface enables extended TV formats GENEVA -- STMicroelectronics (NYSE: STM), a leader in chips for set-top boxes and digital TVs and one of the supporters and developers of the Displayport and iDP (Internal DisplayPort) standard, today announced it has demonstrated to key customers that its iDP-LVDS 'bridge chips,' the STiDP888 and STiDP880, fully support...

Read More »
How to Choose the Right Adhesive Tape for Your Application
Sponsored

How to Choose the Right Adhesive Tape for Your Application

With a considerable number of adhesive materials, applications and methods, there are many options to consider when choosing an adhesive tape. As NADCO® is a leading manufacturer of custom tapes and labels; we took our years of experience to create this handy selection guide on choosing the right adhesive tape for your application.

Read More »
Transceivers

Marvell Avastar 88W8787 Achieves the First Dual-band 802.11n Radio 'Wi-Fi Direct' Certification

Leading enterprise and consumer Wi-Fi solution provider first to feature Wi-Fi Direct certification for low-power embedded mobile applications, delivering high-performance, robust, secure and seamless connectivity for the always-on consumer and enterprise mobility SANTA CLARA, Calif. -- Marvell (Nasdaq: MRVL), a worldwide leader in integrated silicon solutions, today announced its Avastar(TM)...

Read More »
N-Channel Power MOSFET features 15.12 ohm-nC FOM.
Circuits

N-Channel Power MOSFET features 15.12 ohm-nC FOM.

Housed in TO-247 package, 600 V/47 A Model SiHG47N60S features ultra-low maximum on-resistance of 0.07 W at 10 V gate drive and optimized gate drive of 216 nC. Unit is produced using Super Junction technology, which minimizes on-state resistance and withstands high energy pulse in avalanche and commutation mode. Compliant to RoHS Directive 2002/95/EC, MOSFET is suited for solar and wind...

Read More »
Single-Chip Motor Controller allows full digital control.
Circuits

Single-Chip Motor Controller allows full digital control.

Digital SPIN (dSPIN(TM)) monolithic motor-control IC combines digital control, analog measurement, and power electronic circuitry for controlling stepper motors using ST's BCD fabrication process. Voltage-mode control algorithm smoothes motor movement and feeds motor phases with accurate sinusoidal waveform, resulting in position resolution of 128 microsteps/step. Over-temperature, low bus...

Read More »
Three-Phase Motor Drivers withstand voltages up to 500 V.
Circuits

Three-Phase Motor Drivers withstand voltages up to 500 V.

Employing small-footprint SOP package, SX68000M Series features 85-230 Vac input range and 1.5-2.5 A output current, providing IPM solution for controlling motor inverters used to drive small-size motors in residential and commercial appliances. ICs consist of all power elements needed to configure main circuit of inverter, including 6 MOSFETs and 2 pre-drive ICs.

Read More »
Miscellaneous Controls

Dual-Supply Supervisory ICs monitor microprocessors, FPGAs.

Supplied in 5-lead, 1.7 x 3.0 mm SOT-23 package, ADM6305/6 dual-voltage supervisors provide high-voltage threshold accuracy of 1.2% for monitoring low-voltage core rails. ICs are designed to monitor 2 supplies and provide reset signal to digital processor-based systems. The two adjustable, resistor-programmable, under-voltage reset inputs of 0.4 and 1.23 V monitor supplies of less than 1.2 V when...

Read More »
Circuits

USB Power Charger IC includes 2.6 GHz signaling switch.

Featuring 3 x 3 mm WQFN package, TPS2540 integrates current-limited power switch and high-bandwidth 2.6 GHz signaling switch optimized for USB interface. Allowing for charging of portable devices that draw power via USB, unit supports USB charging modes worldwide. Product is suitable for USB ports in host applications such as AC wall adapters, desktop PCs, docking stations, and auto charging...

Read More »
Solder Redefined
Sponsored

Solder Redefined

Indium Corporation has developed a new twist on traditional solder by developing a composite with a reinforced matrix internal structure. The result is a solder with increased strength and reliability. Check out this video to learn more about the mechanics behind the groundbreaking technology.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers