Circuits

Electronic Converters

Four-Channel, 14-bit ADC delivers 250 MSPS performance.

Supplied in 10 x- 10 mm BGA package, ADS4449 consumes 365 mW per channel and enables receiver systems to support up to 125 MHz of instantaneous bandwidth in small forms, such as MIMO base stations and munitions guidance, or in greater density applications, such as AESA and other phased-array radars. ADC delivers 69 dB SNR and 86 dBc SFDR at 250 MSPS, enabling 4-channel receivers capable of...

Read More »
Electronic Drivers

Automotive LED Drivers support dashboard applications.

Featuring 40 V rating on all outputs, Models TLC6C598-Q1 and TLC6C5912-Q1 are monolithic, medium-voltage 8-bit/12-bit shift registers designed for systems that require relatively moderate load power, such as LEDs. Model TLC6C598-Q1 can power up to 8 strings of LEDs, while Model TLC6C5912-Q1Â- can power up to 12 strings of LEDs directly connected to automotive battery. Both offer thermal...

Read More »
Circuits

Bluetooth Smart SoC fosters connectivity for peripherals.

Supplied in 5 x 5 mm QFN package, ARMÂ-® Cortex M3-based BCM20732 allows peripherals to work with Android-based smartphones and tablets. It offers on-chip support for 2 SPIs, has on-board wakeup timer and 12-bit ADC, and is optimized for single-mode coin cell operation and from 1.2 V supply. Along with integrated RF and Embedded Bluetooth Smart Stack, chip provides full software support that...

Read More »
Electronic Converters

Four-Channel, 14-bit ADC delivers 250 MSPS performance.

Supplied in 10 xÂ- 10 mm BGA package, ADS4449 consumes 365 mW per channel and enables receiver systems to support up to 125 MHz of instantaneous bandwidth in small forms, such as MIMO base stations and munitions guidance, or in greater density applications, such as AESA and other phased-array radars. ADC delivers 69 dB SNR and 86 dBc SFDR at 250 MSPS, enabling 4-channel...

Read More »
Transceivers

LIN Transceiver exhibits strong EMC/ESD behavior.

Supplied in SOIC8 package, MLX80030 supports local interconnect network (LIN) bus and enables development of LIN slaves. AECQ100-qualified IC combines- physical layer LIN transceiver with 3.3 V voltage regulator that has reset output for system MCU. Based on 0.35 µm HV-CMOS process technology, transceiver draws 15 µA in standby mode. Other features include standby management...

Read More »
Transceivers

LIN Transceiver exhibits strong EMC/ESD behavior.

Supplied in SOIC8 package, MLX80030 supports local interconnect network (LIN) bus and enables development of LIN slaves. AECQ100-qualified IC combinesÂ- physical layer LIN transceiver with 3.3 V voltage regulator that has reset output for system MCU. Based on 0.35 µm HV-CMOS process technology, transceiver draws 15 µA in standby mode. Other features include...

Read More »
Circuits

Industry's First 802.11ac 4x4 Reference Design Specifies ANADIGICS' WiFi FEICs

ANADIGICS Leverages its Unique InGaP-Plus Technology in a Single-Die WiFi FEIC to Reduce Time-to-Market, Achieve Greater Throughput, and Deliver Exceptional Thermal Performance WARREN, N.J. – ANADIGICS, Inc. (Nasdaq: ANAD), a world leader in radio frequency (RF) solutions, today announced that its AWL9281 and AWL9581 WiFi front-end integrated circuits (FEICs) have been selected for use with the...

Read More »
Circuits

Industry's First 802.11ac 4x4 Reference Design Specifies ANADIGICS' WiFi FEICs

ANADIGICS Leverages its Unique InGaP-Plus Technology in a Single-Die WiFi FEIC to Reduce Time-to-Market, Achieve Greater Throughput, and Deliver Exceptional Thermal Performance WARREN, N.J. – ANADIGICS, Inc. (Nasdaq: ANAD), a world leader in radio frequency (RF) solutions, today announced that its AWL9281 and AWL9581 WiFi front-end integrated circuits (FEICs) have been selected for use with the...

Read More »
DC to DC Power Supplies (Converters)

DC-DC Converters use synchronous rectifier technology.

Measuring 5.0 x 5.7 x 2.1 mm, Model LXDC55FAAA-203 supports input voltage of 4.0–14.0 Vdc and provides max output current up to 1.5 A, while Model LXDC55KAAA-205 has input voltage of 2.7–5.5 Vdc with output current up to 3 A. Both step down converters offer voltage trim function that allows adjustment of output voltage within range of 0.8–5.3 Vdc for 55F model and up to 3.6 Vdc for 55K...

Read More »
DC to DC Power Supplies (Converters)

DC-DC Converters use synchronous rectifier technology.

Measuring 5.0 x 5.7 x 2.1 mm, Model LXDC55FAAA-203 supports input voltage of 4.0–14.0 Vdc and provides max output current up to 1.5 A, while Model LXDC55KAAA-205 has input voltage of 2.7–5.5 Vdc with output current up to 3 A. Both step down converters offer voltage trim function that allows adjustment of output voltage within range of 0.8–5.3 Vdc for 55F model and up to 3.6 Vdc for 55K...

Read More »

All Topics