Chucks and Collets

Diaphragm Chuck grips compressor scrolls.
Chucks and Collets

Diaphragm Chuck grips compressor scrolls.

7 in. Diaphragm Chuck is designed to grip cast-iron compressor scrolls on drive shaft hub for finish milling of scroll walls and face. 8 air-open/spring-clamp chucks are mounted on tombstone. Chucks have pulldown action to pull scroll onto fixed stop for zero Z-axis location. Jaws change out for 2 sizes of scrolls and repeat to 1/10,000 TIR. SAE or metric sizes range from 3 in.(76 mm) to 12...

Read More »
Collet Closer is suitable for miniature workholding.
Chucks and Collets

Collet Closer is suitable for miniature workholding.

Tiny Mini-Collet Closer is 1-1/2 in. square with 3/4 in. dia capacity, can be mounted on vertical machining centers or CNC drilling and tapping machines, and is suitable for machining miniature parts such as medical devices, fuel injectors and computer components. It can be used as single unit or in multiple configurations either horizontally or vertically, and can be activated by air or...

Read More »
Quick-Change Chuck puts parts on pallets.
Chucks and Collets

Quick-Change Chuck puts parts on pallets.

Quick-Change Pallet Chuck for CNC milling allows users to mount machine stock, workholders, or dedicated fixtures to pallets in order to create repeatable home position for CNC work stations. Preparing stock on bench and milling one job while another is being prepared saves machine time. Pallets lock with 23,000 lbs of mechanical holding force and stay locked until standard air pressure is...

Read More »
Collet Chucks bolt directly to lathe spindle nose.
Chucks and Collets

Collet Chucks bolt directly to lathe spindle nose.

Direct mount collet chucks can be used on any spindle that uses draw tube type actuator. With pull back design, compact units are suited for clamping small diameter workpieces, increasing tool clearances and reducing strain on spindle bearings. Rigid clamping allows increased machine speeds for bar feed applications. Chucks are available in types 5C, 16C, 3J, 20C and 25C. Threaded nose is...

Read More »
Power Chucks keep jaw force at maximum speeds.
Chucks and Collets

Power Chucks keep jaw force at maximum speeds.

Royal LS-HS Series three-jaw, wedge-type chucks maintain 80% of jaw force at high speeds, permitting turning of large dia work parts or frail work parts requiring light clamping force to prevent distortion. Chucks are made from high-alloy steel. They are available in 24-36 in. sizes with all standard master jaw configurations. Chip and coolant protection reduces lubrication frequency, increases...

Read More »
Magnets are suited to heavy-duty shop floors.
Permanent Magnets

Magnets are suited to heavy-duty shop floors.

Uses for STRONG-MAG(TM) industrial magnets include jigging, clamping, positioning, work holding, lifting, moving, and gripping. Available shapes include button, cylindrical, flat, round, rectangular, and horseshoe. Magnetic materials range from ceramic and alnico to neodymium iron boron and samarium cobalt. STRONG-MAG(TM) magnetic products also include permanent magnet chucks and magnetic...

Read More »
Chucks have through-coolant capability.
Chucks and Collets

Chucks have through-coolant capability.

Featuring thick wall design, Power Milling Chucks resist deflection even under heavy side loading. Concentricity is within .0002 in. T.I.R. at the nose. Seals are used to resist contamination of internal components. Chucks are available in BT 40 and CAT 40 and 50 shank sizes in 3/4 in. and 1 1/4 in. chuck capacities. Accessories include 2 straight slotted bushing/collet designs to handle shank...

Read More »
Collet Closer clamps down on machining centers.
Chucks and Collets

Collet Closer clamps down on machining centers.

High-pressure hydraulic Tri-Grip 5C collet is suitable for workholding applications in vertical and horizontal machining centers. It operates 3 collets simultaneously, with each on 2-1/2 in. center. Collet and part do not move, maintaining fixed height from part to part. It automatically locates collet locking screw access on top of collet block, which allows infinite collet or part orientation....

Read More »
Gripping Rails with Clamps improve holding force.
Rails

Gripping Rails with Clamps improve holding force.

Pitbull Gripping Rails, with built-in clamps, maintain parallelism on non-ferrous or ferrous parts. Their asymmetric design allows for precision tolerances. Pitbull Gripping Rails also improve holding force of magnetic chucks when used to hold difficult or irregularly shaped ferrous workpieces. They allow users to add extra steel blocking to increase resistance against sliding, and can hold large...

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers