Sliding Jaw Air Chuck delivers 0.0001 in. TIR.
Along with quick-change jaws and hard stop, 3-jaw Model 650 features 0.0001 in. TIR, 0.100 in. max jaw opening, and 988 lb force per jaw. Subjaws are permanently mounted to chuck's master jaws, and Quick-Change top jaws are held in place by one bolt through keyhole slot in each jaw pad. Weighing 14 1/8 lb with aluminum jaws or 14 7/8 lb with steel jaws, chuck offers repeatability of 0.000025 in....
Read More »
Sliding Jaw Air Chuck delivers 0.0001 in. TIR.
Along with quick-change jaws and hard stop, 3-jaw Model 650 features 0.0001 in. TIR, 0.100 in. max jaw opening, and 988 lb force per jaw. Subjaws are permanently mounted to chuck's master jaws, and Quick-Change top jaws are held in place by one bolt through keyhole slot in each jaw pad. Weighing 14 1/8 lb with aluminum jaws or 14 7/8 lb with steel jaws, chuck offers repeatability of 0.000025 in....
Read More »
Toolholder Collets, Bushings, and Tool Holders from Hardinge
When it comes to tool holding, value is all about precision and reliability that will transmit to the finished part. Hardinge toolholder collets, bushings and tool holders are designed and engineered for quality and durability. Hardinge's standard of performance is high to help you achieve the level of accuracy required. Hardinge tool holders and toolholder collets are available in ER, DA (double...
Read More »
Toolholder Collets, Bushings, and Tool Holders from Hardinge
When it comes to tool holding, value is all about precision and reliability that will transmit to the finished part. Hardinge toolholder collets, bushings and tool holders are designed and engineered for quality and durability. Hardinge's standard of performance is high to help you achieve the level of accuracy required. Hardinge tool holders and toolholder collets are available in ER, DA (double...
Read More »
Quick Release & Spring Loaded Pins - Fast, Convenient and Secure
To learn more about the different types of pins available or which ones to select for your specific application, download our product guide.
Read More »
Collet Chucks offer multiple usage options.
Interchangeable with Northfield 4 or 6 in. chucks, air actuated 5C Collet Chuck uses Northfield standard air feed tubes (wet or dry) and can run at speeds in excess of 8,000 rpm. All components are hardened and ground to 58/63 RC, and all diameters are ground within 1/10,000 TIR. While this chuck uses standard 5C collets, it can also accept 5C expanding collets.
Read More »
Collet Chucks offer multiple usage options.
Interchangeable with Northfield 4 or 6 in. chucks, air actuated 5C Collet Chuck uses Northfield standard air feed tubes (wet or dry) and can run at speeds in excess of 8,000 rpm. All components are hardened and ground to 58/63 RC, and all diameters are ground within 1/10,000 TIR. While this chuck uses standard 5C collets, it can also accept 5C expanding collets.
Read More »REGO-FIX® Will Showcase Advanced Tooling at SOUTH-TEC 2013
reCool-®, secuRgrip®, PG6 and new milling chucks to take center stage INDIANAPOLIS, Ind. – Toolholding innovation will take center stage in the REGO-FIX booth 330 at SOUTH-TEC 2013, scheduled for Oct. 29 – 31 in Greenville, S.C. The company will present its new low-cost retrofit solution for the internal cooling of driven tools as well as showcase advanced tooling systems that bring...
Read More »REGO-FIX-® Will Showcase Advanced Tooling at SOUTH-TEC 2013
reCoolÃ-®, secuRgripî, PG6 and new milling chucks to take center stage INDIANAPOLIS, Ind.à– Toolholding innovation will take center stage in the REGO-FIX booth 330 at SOUTH-TEC 2013, scheduled for Oct. 29 – 31 in Greenville, S.C. The company will present its new low-cost retrofit solution for the internal cooling of driven tools as well as showcase advanced tooling systems...
Read More »Boundary Lubricant prevents metal-to-metal contact.
Suitable for high-end manual chucks or power chucks, HPG500 Lubricant prevents metal-to-metal contact under high load and slow speed conditions. NLDI Grade 2 lubricating grease offers optimized water- and moisture resistance, with water washout rating of less than 3%. Formula also provides rust and corrosion resistance, even in presence of synthetic and oil-based coolant environment....
Read More »Boundary Lubricant prevents metal-to-metal contact.
Suitable for high-end manual chucks or power chucks, HPG500 Lubricant prevents metal-to-metal contact under high load and slow speed conditions. NLDI Grade 2 lubricating grease offers optimized waterÃ- and moisture resistance, withÃÂ water washout rating of less than 3%. Formula also provides rust and corrosion resistance, even in presence of synthetic and oil-based coolant environment....
Read More »
Aerzen USA Process Gas Blower and Compressor Installations Worldwide
Aerzen is firmly established as a global leader in compressed air, gas, and vacuum solutions. Our reputation as an industry leader is built on consistently delivering innovative products that are at the cutting edge of technology. To learn about the industries finest blowers and oil-free and oil-injected screw compressors, see our video.
Read More »
