Chemical Strippers

Chemical Strippers

Aztec Products Celebrates 20 Years with Innovative Guzzler

Still the most innovative stripping solution recovery machine in the janitorial industry. Aztec Products is celebrating 20 years with The Guzzler, which is known throughout the industry as the most innovative piece of equipment for removing stripping solution from vinyl and ceramic tile, sealed or finished concrete floors and stone and terrazzo floors. When it was introduced 20 years ago, The...

Read More »
Electric Rotary Endfinisher removes coating from tube ends.
Chemical Strippers

Electric Rotary Endfinisher removes coating from tube ends.

Electric 21CS-EL Coating Stripper removes coatings, such as nylon, from tube OD in preparation for endforming. Providing clean tube end, tool does not affect corrosion protective barrier coatings underneath outer coating. Coating removal head can be configured to also provide deburring feature. Offering quick tool change and setup, unit has independent tool close and position and noise-free...

Read More »
Waterjet Surface Preparation Machine Strips Paint, Coatings, Dirt, Grease from Steel Decks, Concrete Floors
Chemical Strippers

Waterjet Surface Preparation Machine Strips Paint, Coatings, Dirt, Grease from Steel Decks, Concrete Floors

ST. MICHAEL, Minn. (September 8, 2009) - Jet Edge's Ultra Deckblaster waterjet surface preparation machine uses ultra-high pressure waterjets to quickly blast away old paint, coatings, grease and dirt from steel decks and concrete floors without using hazardous chemicals. Resembling a lawnmower, the self-propelled Ultra Deckblaster operates at pressures up to 55,000 psi (3,800 bar). Typical...

Read More »
Chemical Strippers

Water Blaster removes pavement markings.

Designed to liquefy weathered and hardened paint, curing compound, tack, or sealer, Liquidator(TM) features truck or tractor mounted cleaning head that discharges 20,000 or 40,000 psi water blast from self-contained water supply. Cleaning path from 5-19 in. can be blazed from multiport nozzle bar with Twist Lock Shroud(TM). Providing continuous production removal rates from 1,500-2,000 linear...

Read More »
Laser Edge Deletion System targets solar panel manufacturers.
Chemical Strippers

Laser Edge Deletion System targets solar panel manufacturers.

SolaryX(TM) Edge uses pulsed lasers to remove all coatings - amorphous silicon (a-Si), cadmium-telluride (CdTe), copper-indium-diselenide (CIS), copper-indium-gallium-diselenide (CIGS) - around perimeter of thin-film solar panels. Featuring optical design, edge laser processing system is designed for fast takt times and reliability in 24/7 industrial thin-film solar panel manufacturing...

Read More »
Dent Remover has rugged, compact design.
Chemical Strippers

Dent Remover has rugged, compact design.

Model 302 Panel Cup is effective in eliminating oil can indentations from doors and quarter panels. Non-scratching materials allow tool to be used to lift and handle glass, and oval-shaped cup in unit can be positioed in any direction. To use it, body technicians connect air hose to integrated venturi jet evacuator, position tool on dent, turn on air flow to create vacuum, and pull dent by...

Read More »
Chemical Strippers

Pavement Marking Removal System has vacuum recovery system.

Available as truck-mount or tractor-mount system, Liquidator(TM) incorporates Vacuum Recovery Box with angled floor and self-dumping vibrator designed to optimize operation. Custom designed system delivers waster blast pressures from 20,000-40,000 psi for paint line removal, rubber removal, curbing compound removal, and coating removal from various asphalt and pavement surfaces on roadways,...

Read More »
Chemical Strippers

System removes conductive coatings in one step.

Using X, Y, and Z axis motion and high-intensity laser beam, Model FL600 removes ITO from glass typically used in flat panel displays, liquid crystal displays, and touch screens. Wavelength of laser and energy transmission is suitable for removing conductive coating without damaging film or glass. Operating at speeds up to 12 m/s, system is environmentally friendly and designed to handle maximum...

Read More »
Fast Acting, Safe Powder Coating Stripper Works at Low Temperatures
Chemical Strippers

Fast Acting, Safe Powder Coating Stripper Works at Low Temperatures

Peabody, MA (January 2008)...D-Zolve 917 from Solvent Kleene, Inc. is a fast acting, safe paint and powder coating stripper designed to be used at low temperatures in an immersion tank. D-Zolve's ability to quickly penetrate and break the chemical bond between the coating's layers and the substrate eliminates the need for costly, high energy consuming burnoff, blasting or heating of the solution...

Read More »
Hard Metal Coating Strippers remove TiN, CrN, and TiAIN.
Chemical Strippers

Hard Metal Coating Strippers remove TiN, CrN, and TiAIN.

To allow re-coating, Deconex® De-Coat Metal Coating Strippers remove specific types of coatings on carbides, carbide composites, HSS, PM, and other tool steels while protecting integrity of base materials. They are suited for use in cold- or hot-process baths, applications include forming tools, drill bits, end mills, hobs, cutting inserts, pins, punches, and bushings. Extending useful life of...

Read More »
Precision Machining Solutions with Over 25 Years of Experience
Sponsored

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.

Read More »

All Topics