Chemicals & Chemical Processing

Chemicals & Chemical Processing, Electrical Equipment & Systems

Color Counts in Cutting Stainless Steel with a Fiber Laser

Aug 01, 2017

2 cut samples a 10 Ga washer and .250” washer cut from 304 Stainless Steel by fiber laser using INTO-N2 Ultra-High Pressure, High Purity Nitrogen Generator.

These washers are cut from 304 SS (thicker washer is .250” – thinner washer is .140”) on a 4000W fiber laser and the assist gas was Nitrogen generated from shop air to 99.99% from INTO-N2’s new high purity, high pressure... Read More

Chemicals & Chemical Processing, Electrical Equipment & Systems

PSA Nitrogen Generator can store up to 13,500 cf of N2 gas.

Aug 01, 2017

PSA-6000/PB-4500 PSA Nitrogen Generator is equipped with 4,350-psi boost pump that is used for compressing air into high pressure cassettes. Enabling users to continuously produce 99.99% pure N2 gas at 4,350-psi pressure, unit is suitable for laser cutting applications. Generator comes in 48 x 48 in. and 60 in. tall rack.

Read More

Chemicals & Chemical Processing

Diba Filters are suitable for fluidics application.

Jul 26, 2017

Offered in PEEK, PTFE and stainless steel materials, Diba Filters are used to remove particulate sizes from 5μ up to 250μ. Units are available in In-Line and bottle straw filters configurations. In-Line filters come in male to female and female to female with different port sizes. Bottle Straw filters allow the user to aspirate maximum amount of liquid out of the container. Suitable for... Read More

Chemicals & Chemical Processing, Cleaning Products & Equipment, Packaging Products & Equipment

VAC-U-MAX Exhibits Processing & Packaging Automation Solutions for Bulk Material Transfer to Filling Machines and Packaging Lines and, Industrial Vacuum Cleaning Systems for Powders & Combustible Dusts at Pack Expo 2017

Jul 25, 2017

BELLEVILLE, NJ USA (July 24, 2017) – VAC-U-MAX proudly announces exhibition at Pack Expo 2017, September 25-27, Las Vegas Convention Center, Las Vegas, Nevada, Booth S-7217, exhibiting “Ready-to-Operate“ processing and packaging solutions for powder and bulk-ingredient transfer to filling machines and packaging lines. Specializing in the design, manufacture, engineering, and automation... Read More

Architectural and Civil Engineering Products, Chemicals & Chemical Processing, Construction Equipment and Supplies, Materials & Material Processing

Rock Rebar® Reinforces Concrete

Jul 25, 2017

Basalt’s Rock Rebar® has been approved for use in the Halls River Bridge. Concrete reinforcements from Basalt are available in three forms: FRP’s (Fiber Reinforced Polymers), GFRP (Glass Fiber Reinforced Polymers), and BFRP (Basalt Fiber Reinforced Polymers). 

Read More

Chemicals & Chemical Processing, Fluid & Gas Flow Equipment

Polycarbonate Filters in Legionella Detection

Jul 15, 2017

There's no shortage of news stories on a tiny bacterium continuing to cause big trouble; Legionella. In a recent search of Google News, 1800 different stories from across the globe are revealed for June of this year when searched strictly against the term "Legionella." Illustrations of how serious a threat is this bacterium can be are seen across the variety of the news stories; from... Read More

Chemicals & Chemical Processing

Membrane Biofouling Mitigation through Applying Electric Potential in the CF016 Cell

Jul 15, 2017

Membrane filtration is an effective way to remove pollutants and microorganisms from water and wastewater. However, membrane fouling lowers efficiency over time when considering rejection values and water flux. Fouling is typically biological or particulate; fouling rate is a function of the membrane pore size relative to the size of the foulants and also the interactions between the membrane... Read More

Adhesives & Sealants, Chemicals & Chemical Processing

Ply-Guard EP - 100% Solids Epoxy Resin System

Jul 13, 2017

Polyset, a leading manufacturer of polymer materials, is proud to offer a low viscosity, 100% solids, self-leveling epoxy resin system that is used in a wide variety of floor coating applications. Ply-Guard EP can be used as a primer, finish coat, aggregate binder, slurry coat, or epoxy mortar. This material cures blush-free and provides an outstanding balance of physical strength,... Read More

Chemicals & Chemical Processing, Fluid & Gas Flow Equipment

Entegris Announces Single Ultraclean Filtration Solution for Fine Chemical and Semiconductor Manufacturing

Jul 13, 2017

Customer testing demonstrates faster start-up times, less chemical waste, and superior levels of contamination control across the supply chain

BILLERICA, Mass., July 12, 2017 - Entegris, Inc. (NASDAQ: ENTG), a leader in world-class specialty materials, announced today a suite of ultraclean filters that utilizes advanced polymer membrane technologies to capture greater levels of... Read More

Chemicals & Chemical Processing, Materials & Material Processing

Wego Offers and Innovative Polydimethylsiloxane

Jul 11, 2017

Wego Chemical Group is a leading global supplier and distributor of Silicones such as Polydimethylsiloxane in varying viscosity degrees. It is found under CAS # 63148-62-9 and EINECS # 203-492-7 and referred to as E900, its code for European food additives. These Silicone Fluids have the molecular formula of (C2H6OSi)n. It can also be referred to as PMDS, Dimethyl Fluid, Methylpolysiloxane,... Read More

Chemicals & Chemical Processing

Industrial Filtration System Enhances Product Quality of Liquid Emulsions

Jul 07, 2017

Self-cleaning industrial liquid filters provide robust and reliable filtration system for Flexcrete's new hygienic liquid membranes

Flexcrete, manufacturers of high performance coatings and technical mortar solutions, required an in-line industrial filtration solution to meet increased demand for their liquid emulsions. After a consultation with Russell Finex at an exhibition,... Read More

Chemicals & Chemical Processing

Industrial Vacuums feature conical cartridge filters.

Jun 28, 2017

Suitable for food, pharmaceutical and OEM industries, Industrial Vacuums are equipped with PullClean filter cleaning system. Available in CTS26, T48 and T63 variants, units come with manual filter shaker, manometer and rear swiveling wheels. Vacuums meet ETL and NFPA 652 standards.

Read More

Chemicals & Chemical Processing

Jaygo has an Innovative Sanitary Vee Blender

Jun 24, 2017

They recently shipped a very large, sanitary Vee Blender to blend various powder ingredients for the production of vitamins and supplements. The 8000 liter blender was constructed in 316L Stainless Steel and includes a pneumatically actuated discharge valve with inflatable seat, radio frequency proximity switches to sense loading ports position, and a radio frequency level probe to monitor... Read More

Chemicals & Chemical Processing

Interplastic Announces New CoREZYN® NSF Approved Vinyl Ester Resin

Jun 22, 2017

(St. Paul, MN - April 10, 2017) Interplastic Corporation today announced its new CoREZYN vinyl ester resin approved for use in potable (drinking) water pipe and tanks. CORVE8300DW is a corrosion resistant, vinyl ester based resin that is NSF/ANSI 61 certified. CORVE8300DW has the industry’s highest approval for use in piping greater than, or equal to, ½ inch inner diameter and tanks greater... Read More

Chemicals & Chemical Processing

M-Ply™ Synthetic Resin is compliant to RoHS standards.

Jun 22, 2017

Designed for Radio Frequency / digital hybrid bonding, M-Ply™ Prepreg Synthetic Resin is used in multi-layer RF, multifunction antennae, 5G antennae and multi-layer PTFE applications. Having MOT rating of 130°C, product enables combination of RF circuitry and high speed digital circuitry on same board. M-Ply™ offers tight thickness control and T300 of greater than 120 minutes.

Read More

Chemicals & Chemical Processing, Machinery & Machining Tools, Materials & Material Processing

Heavy-Duty and High-Capacity Multi-Agitator Mixing Systems

Jun 20, 2017

Hauppauge, NY, June 19, 2017 – Ross VersaMix Multi-Shaft Mixers designed for robust large-scale production enable reliable and repeatable batch processing of high-volume viscous applications such as solid-liquid dispersions, thickened emulsions, suspensions, pastes and gels. As a multi-agitator system, the VersaMix is easily adaptable for mixing at low, intermediate and high shear levels, or... Read More

Chemicals & Chemical Processing, Fluid & Gas Flow Equipment, HVAC

AMD-035 Membrane Dryer

Jun 16, 2017

The WNA AMD-035 Membrane dryer is your BEST choice when your compressed air application requires Ultra-Clean & Ultra Dry air.

According to Walmec North America, the WNA AMD-035 Membrane dryer has a 4-stage pre-filtration that is critical to the longevity and function of the membrane dryer. It has a flow rating, of 35 SCFM and maximum working pressures of 150 PSI.

The first and... Read More

Chemicals & Chemical Processing, Cleaning Products & Equipment, Fluid & Gas Flow Equipment, HVAC

In an Effort to Make it Easy for Users of Our Quality Air Breathing Systems, we Offer Best Buy Filter Kits

Jun 16, 2017

According to Tom Wright, Director of Sales and Marketing, in order to properly maintain your Martech Services Company products, it is imperative that you replace the filters on a regular basis. Each product has a recommended filter change schedule. Failure to change filters as necessary may result in permanent damage to the product, but more importantly can cause serious illness or injury to... Read More

Chemicals & Chemical Processing, Electrical Equipment & Systems, Waste Management & Waste Handling Equipment

Brady to Exhibit at the 2017 ASSE Safety Conference

Jun 16, 2017

See Brady’s latest safety solutions featuring BRIGHTSORB™ Absorbents and TAGLOCK Circuit Breaker Securing Devices

MILWAUKEE, Wis. (June 14, 2017) - Brady (NYSE:BRC), a global leader in industrial and safety printing systems and solutions, today announced it will exhibit at the 2017 ASSE Safety Conference. The event will take place June 19-22, 2017, at the Colorado Convention Center... Read More

Chemicals & Chemical Processing

Automated System Saves Valuable Bench Space

Jun 13, 2017

JM Science offers the AQS-22010AS Automated Solid Evaporator System, which is an automated Karl Fischer titrator system that combines the AQ-2200 coulometric titrator or AQV-2200 volumetric titrator with the evaporator EV-2010. With an extremely compact and upright design, the system can save valuable bench space. The sample changer can hold up to 10 vials at the same time, and up to 99... Read More