Check Valves

PVC Wafer Check Valve comes in 4, 6, and 8 in. sizes.
Check Valves

PVC Wafer Check Valve comes in 4, 6, and 8 in. sizes.

Operating at max pressure of 150 psi, PVC wafer check valves install on discharge side of pumps in applications such as aquariums, water attractions, water treatment, and municipalities to prevent back-flow flooding that could damage pump systems. Body, disc, and stopper assembly are machined from solid, chemical-resistantÂ- PVC plate stock, which conforms to ASTM D1784 Cell Classification...

Read More »
Plastic Fittings feature check valve cartridge inserts.
Check Valves

Plastic Fittings feature check valve cartridge inserts.

Standard Plastic Fittings are available with spring loaded check valve cartridges made of nylon or polypropylene with O-ring seal consisting of Buna-N, Viton, EPDM, or Silicone. Cracking pressures range from 3 in. H2O to 10 psi. Also offered, free floating ball cartridges are made of polypropylene with EPDM ball. Less than 1 psi is required to open valve, and both normal and reverse flows are...

Read More »
Wafer Check Valves are designed for optimal flow properties.
Check Valves

Wafer Check Valves are designed for optimal flow properties.

WCV Series Full Pattern Wafer Check Valves feature all-thermoplastic, injection molded construction, including angle seat and disc design that promotes flow capacity. Also, full pattern design eliminates need for spacers or specialty flanges. Available in 2-8 in. sizes in PVC and CPVC materials, valves have max pressure rating of 150 psi non-shock at 70°F and will fit ANSI150 and PN10...

Read More »
Choosing the Right Material for Your Project
Sponsored

Choosing the Right Material for Your Project

When choosing an appropriate metal material, the range of options is so broad that selecting the correct material for your unique application can be challenging. Different metals have characteristics that can affect weldability, ductility, and formability. Our new eBook outlines the unique properties and applications of popular metals including: Stainless Steel Brass Aluminum Copper Titanium

Read More »
Check Valves

AutomationDirect adds Air Pilot and Manual Control Valves to Product Line

The NITRA® line of pneumatic products has been extended to include air pilot valves, foot pedal valves, and manual control valves. The AVS-5 series now includes single and double-pilot directional control air pilot valves, offering spring return or center closed operation. All are body ported five-port (four-way) spool valves and are available in 1/8 to Â-½" NPT port sizes with flow...

Read More »
Check Valves

Circle Seal 200 Series Out Performs the Competition

Circle Seal 200 series out performs the competition in both check and relief valve applications. When selecting a check valve or relief valve that requires a low crack pressure and high flow rate, consider a Circle Seal 200 series solution. This style of valve works better than most check valves for several reasons: Quick opening/positive closing Bubble tight Large flow capacity Operating...

Read More »
CVT Technical Support - Selecting The Right Valve
Check Valves

CVT Technical Support - Selecting The Right Valve

One of the key elements in selecting the right check or relief valve is Flow Capacity. This essential element is often not given enough consideration, especially when a replacement valve is being specified. Because of this, a common problem that arises is the valve will be over-sized for the application. When the flow is insufficient to keep the valve open, it will chatter" and may result in...

Read More »
Pilot-Operated Check Valves feature 0-300 psig pressure range.
Check Valves

Pilot-Operated Check Valves feature 0-300 psig pressure range.

Featuring poppet design, JPC Series works as standard check valve, but can be opened with air pilot signal to permit free flow in normally checked position. Units are constructed of ENP brass, anodized aluminum, and stainless steel with Buna-N seals. With temperature range of 32-230°F, valves operate with air, water, or oil as medium. Auxiliary port facilitates plumbing, while side port...

Read More »
Submersible Pump Check Valve has corrosion-resistant design.
Check Valves

Submersible Pump Check Valve has corrosion-resistant design.

Designed for use with variable-frequency drive (VFD) control submersible pumps, Model 80DI VFD check valve minimizes flow losses and hydraulic shocks in pumping system. Standard epoxy coated (NSF® approved powder) ductile iron body supports deep set pumps, and stainless steel guided poppet system ensures valve automatically adjusts noiselessly between flow rates. Valve seat radius allows...

Read More »
Midland Introduces Enhanced Fittings Package for Chlorine Applications
Check Valves

Midland Introduces Enhanced Fittings Package for Chlorine Applications

Sets the standard for the safe transportation, loading and unloading of Chlorine Skokie, IL - Midland Manufacturing, the North American leader in railroad tank car transfer valves and equipment and a division of the OPW Fluid Transfer Group, is pleased to present its new Enhanced Fittings Package specifically designed for the chlorine transportation industry. Featuring corrosion-resistant...

Read More »

All Topics