Check Valves come in non-metallic versions.
Inline Check Valves feature PEEK(TM) polymer inlet and outlet. Springless design results in cracking presure of 1 psi. Units offer backflow protection, biocompatibility, and chemical resistance.
Read More »
Swing Check Valve handles food-grade material.
Model 3030 SQ 3 in. valve, for flow reversal prevention in dry-bulk transfer carriers, protects food-grade and sensitive contents at temperatures up to 350Ã-
Read More »
Backflow Preventers protect water systems.
Model RP reduced pressure principle assemblies are designed for use in high- and low-hazard systems. Designed for low head loss, units are available in sizes from 2Ã-½-10 in. Models offer corrosion-resistant construction, internal sensing passage, and module check assemblies. Diaphragm and sensing passage are built into all-bronze relief valve body. Max working pressure is 175 psig and rated...
Read More »
Double Check Detector Assemblies detect unauthorized use.
Sized from 2Ã-½-10 inches, DCDA units protect against cross-connection of non-hazardous water into safe drinking water systems. Able to monitor water leakage, they have FDA-approved epoxy coated ductile iron body and bronze by-pass, which houses water meter and double check valve assembly. Max working pressure is 175 psig, and operating range is 33-140Ã-
Read More »
3 Formulation Methods to Reduce Lean Giveaway for Processed Meat
Download this white paper, and learn about three methods that can help you improve your bottom line and yield by reducing lean tissue giveaway.
Read More »
Double Check Valve Assemblies suit commercial applications.
Modular, in-line repairable Model DC valve assemblies are available in sizes from 2Ã-½-10 in. Units guard against back-pressure or back-siphonage caused by cross connections between potable water lines and substances that are objectionable but not hazardous. Assemblies offer 175 psig max working pressure and operating temperature range of 33-140Ã-
Read More »
Check Valves are suited for vacuum operations.
Vacuum check valves work with venturi vacuum pumps and switches to seal and maintain vacuum levels. With cracking pressure rated at less than 1 in. Hg., they allow air flow in one direction only. Valves can be manually operated or automatically controlled by vacuum switch. Able to be used in any orientation, valves come in 1/4 and 3/8 in. NPT sizes and are made of chrome plated brass with...
Read More »
Foot Control Valve suits flows up to 80 gpm.
FC10-800 high-pressure water jet foot control valve is rated for pressures up to 10,000 psi. Pedal design includes latch to prevent accidental actuation, and allows operator to dump pressure almost instantly by rocking pedal forward. Dump ports on both sides help valve maintain stability when pressure is dumped. Disposable cartridge seal can be removed and replaced in less than 60 seconds.
Read More »Check Valves are UL listed and FM approved.
Check Valves, in 1Ã-½ and 2 in. sizes, can be installed horizontally or vertically. They are rated up to 250 psi water working pressure and include tapped opening for system draining. Both 1Ã-½ in. and 2 in. are UL and ULC listed in threaded or grooved styles, and are FM approved in the grooved configuration as both single check valves and anti-water hammer check valves.
Read More »
Refrigeration Valves suit CO2 service.
Refrigeration valves include control valve sizes from 3/4 to 6 in., shut off valves from 3/8 to 16 in., and technical equipment for CO2 service. Valves are tagged and painted yellow for identification purposes. Rated to 600 psig, valves offer regulator setting range to 550 psig. Temperature Range is from -65 to 240 deg F. Pressure regulator (3/4 in.) is available with 25% and 50% V-ports for...
Read More »
Ball Valve provides easy access.
Three-Piece Swing-Out Ball Valve provides direct access to internal seals without disturbing pipe alignment. Seal replacement is performed by removing one body bolt, loosening other three, and swinging out center section. Valve body is made from CF-8M stainless steel and is available in female pipe sizes from 1/4 through 2 in. Working pressure is 1000 psi and temperature range is 0 to 400 deg F.
Read More »
Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life
For the ultimate in heat transfer fluid performance, Paratherm offers HR Heat Transfer Fluid that is engineered specifically for closed loop liquid phase heating. When it comes to characteristics such as thermal stability and fluid degradation, Paratherm HR leads the industry in value and performance. See our video to learn how Paratherm is raising the bar for heat transfer fluids.
Read More »
