Check Valves

Check Valves

Check Valve features biocompatible design.

Comprised of lipid-resistant, latex-free polycarbonate with USP class VI silicone valve, Model 11582 features female luer lock inlet and male luer lock outlet. Unit is compatible with many compounds and has 0.217 ppi cracking pressure. Valve features color change from blue to clear when sterilized using gamma radiation.

Read More »
Check Valve prevents basement flooding.
Check Valves

Check Valve prevents basement flooding.

Available for 2, 3, and 4 in. floor drains, Flood-Guard-® operates like check valve to seal off water back-up caused by overloaded sewers. Water flows normally through drain until sewer begins to back up; then Flood-Guard-® float rises to seal off drain opening until water recedes. Unit requires only screwdriver for installation, and once in place, can prevent property damage. Flood-Guard-® is...

Read More »
Air Amplifiers and How They Work
Sponsored

Air Amplifiers and How They Work

Air amplifiers are pneumatically driven devices that use shop air to provide the motive power for increasing air pressure. This white paper provides an in-depth overview into the air amplifiers and how they work.

Read More »
Flow Control Valves control air from cylinders.
Check Valves

Flow Control Valves control air from cylinders.

Models JFC-4 and JFC-5 are combination needle and check valve flow controls used to control air flow from air cylinders. Units control speed at which piston strokes, either while extending or retracting, depending on location in circuit. They allow free flow from inlet to outlet past needle and check valve. In reverse flow, check valve is sealed and flow must pass through metered passage...

Read More »
Foot Control Valve suits flows up to 80 gpm.
Check Valves

Foot Control Valve suits flows up to 80 gpm.

FC10-800 high-pressure water jet foot control valve is rated for pressures up to 10,000 psi. Pedal design includes latch to prevent accidental actuation, and allows operator to dump pressure almost instantly by rocking pedal forward. Dump ports on both sides help valve maintain stability when pressure is dumped. Disposable cartridge seal can be removed and replaced in less than 60 seconds.

Read More »
Check Valves

Check Valves are UL listed and FM approved.

Check Valves, in 1Â-½ and 2 in. sizes, can be installed horizontally or vertically. They are rated up to 250 psi water working pressure and include tapped opening for system draining. Both 1Â-½ in. and 2 in. are UL and ULC listed in threaded or grooved styles, and are FM approved in the grooved configuration as both single check valves and anti-water hammer check valves.

Read More »
Refrigeration Valves suit CO2 service.
Check Valves

Refrigeration Valves suit CO2 service.

Refrigeration valves include control valve sizes from 3/4 to 6 in., shut off valves from 3/8 to 16 in., and technical equipment for CO2 service. Valves are tagged and painted yellow for identification purposes. Rated to 600 psig, valves offer regulator setting range to 550 psig. Temperature Range is from -65 to 240 deg F. Pressure regulator (3/4 in.) is available with 25% and 50% V-ports for...

Read More »
Ball Valve provides easy access.
Check Valves

Ball Valve provides easy access.

Three-Piece Swing-Out Ball Valve provides direct access to internal seals without disturbing pipe alignment. Seal replacement is performed by removing one body bolt, loosening other three, and swinging out center section. Valve body is made from CF-8M stainless steel and is available in female pipe sizes from 1/4 through 2 in. Working pressure is 1000 psi and temperature range is 0 to 400 deg F.

Read More »
Check Valves are designed for installation in plastic.
Check Valves

Check Valves are designed for installation in plastic.

CCPI Series Press-In Chek miniature cartridge style check valves are available in 5.5 and 8 mm diameters. Barbed design provides retention and prevents any bypass leakage around valve. Each valve is 100% tested for flow, leakage and cracking pressure. Press-In Chek valves are offered in cracking pressures from 0 to 72.5 psid and are compatible with most fluids.

Read More »

All Topics