Check Valves

Ball Check and Poppet Valves are made of stainless steel.
Check Valves

Ball Check and Poppet Valves are made of stainless steel.

Stainless steel poppet and ball check valves, available in sizes from Â-¼-1 in. ips, are spring loaded for 2-10 psi and rated for pressures to 2,500 psi. While poppet valves have temperature range of -15 to +400°F and come standard with Viton(TM) or Teflon® O-rings, ball valves have temperature range of -20 to +650°F and come with 316 SS ball standard. Other O-ring...

Read More »
Check Valves feature large port, high-flow design.
Check Valves

Check Valves feature large port, high-flow design.

Featuring rugged poppet design with low cracking pressure of less than 1.5 psi, Series 1900 operates quietly due to soft-seal design and is serviceable in-line. Available in sizes from Â-½-2½ in. NPT, valves feature max Cv ratings of 5.2-50. Metric and SAE ported models are also available.

Read More »
Check Valves suit chemical analysis and fluid/gas delivery.
Check Valves

Check Valves suit chemical analysis and fluid/gas delivery.

Available with silicone disk valves, Polycarbonate Luer Check Valves come in 6 configurations featuring male and female Luer with locking swivel and slip connections. They meet most clean room and sanitary requirements, non-contact medical delivery, and are acceptable for use with food processing and potable water. One Way valves are designed for use in applications requiring one way flow in...

Read More »
Check Valves

Strainers and Valves feature True Union end connections.

Spring-loaded Y Check Valves, Y Check Valves, and Y Strainers are available with True Union end connections to fit Â-½-4 in. pipelines, permitting valves and strainers to be removed from piping system without breaking down system components. All plastic valves and strainers will never stick, jam, or fail from rust or corrosion, and help prevent damage to pumps, filters, and other process...

Read More »
Check Valves

Check Valves target dual-fuel turbine installations.

Fabricated in 316 SS, CB Series Valves add protection in any system where back flow or pressure might cause damage. They include floating ball with micro-finished surface, Teflon® coated ball cage, and seats fabricated from materials that provide soft sealing surface for bubble-tight shut off and compatibility with fuel oils and amines. Valves come in 3/8, Â-½, and ¾ in. sizes,...

Read More »
Check Valves are available in brass or stainless steel.
Check Valves

Check Valves are available in brass or stainless steel.

Series of miniature valves includes standard check valves, fixed flow controls, checked orifices, and bidirectional flow controls. Set screw style for manifold applications is offered with size 10/32, 1/4-20, 5/16-18 and 3/8-16 threads. In-line construction is produced in 10/32 as well as 1/8 and Â-¼ in. NPT sizes.

Read More »
Check Valve minimizes pressure drop.
Check Valves

Check Valve minimizes pressure drop.

Cepex Wafer Check Valves prevent reversal of flow in piping systems, protecting pumps, filters, and other process equipment. With straight through design, products operate without requiring adjustments or settings and will not stick, jam, or fail due to rust or corrosion. Valves, available to fit 4, 6, or 8 in. pipelines, feature PVC construction with flanged connections and choice of EPDM or FPM...

Read More »
Check Valve prevents basement flooding.
Check Valves

Check Valve prevents basement flooding.

Available for 2, 3, and 4 in. floor drains, Flood-Guard® operates like check valve to seal off water back-up caused by overloaded sewers. Water flows normally through drain until sewer begins to back up; then Flood-Guard® float rises to seal off drain opening until water recedes. Unit requires only screwdriver for installation, and once in place, can prevent property damage. Flood-Guard®...

Read More »
Swing Check Valves suit dry bulk transfer carriers.
Check Valves

Swing Check Valves suit dry bulk transfer carriers.

Line of 3 and 4 in. swing check valves protects food-grade and dry bulk contents at temperatures to 350°F. Computer-generated design eliminates flow restrictions through body by allowing flapper to swing completely out of airflow. Cast-aluminum construction includes all-stainless steel hardware, elastomer permanently bonded to drop-in metal flapper assembly, and sealed, compartmentalized...

Read More »
Flow Control Valves control air from cylinders.
Check Valves

Flow Control Valves control air from cylinders.

Models JFC-4 and JFC-5 are combination needle and check valve flow controls used to control air flow from air cylinders. Units control speed at which piston strokes, either while extending or retracting, depending on location in circuit. They allow free flow from inlet to outlet past needle and check valve. In reverse flow, check valve is sealed and flow must pass through metered passage...

Read More »
Neagle Choice, LLC Announces New Available Services
Sponsored

Neagle Choice, LLC Announces New Available Services

Neagle Choice has long been known as a quality source for commercial sewing, printing, die cutting, and the manufacturing of a wide range of custom products. Enhancing our service capabilities has been the key to our success, and has driven our growth into many new and exciting markets. Continuing on this trajectory, we now offer precision laser cutting and etching, adding to our long line of manufacturing services. See our video to learn all about it.

Read More »

All Topics