New Chassis Products

Chassis is optimized for maximum cooling capability.

Fully redundant 12U AdvancedTCA (ATCA) chassis incorporates 3 plug removable fan trays with six 130 cfm fans. Top of chassis is angled, facilitating escape of airflow exhaust when multiple chassis are stacked on top of each other in racks. Unit incorporates 7U ATCA backplane inside with 14-slot Dual Star topology. Other features include dual Power Entry Modules, dual shelf management modules,...

VXI Chassis includes RS-485 monitoring.

Model RHP 11-slot Chassis features laminate welded construction using lightweight materials. Model RHP-1, with one dc power module, is rated for 1,460 W, while Model RHP-2 has 2 modules for combined rating of 2.2 kW. Monolithic backplane offers active automatic bus-grant and IACK jumpering, active termination, and 96-pin DIN connectors. Plugging fan module provides 450 cfm at 0.4 in. H2O, making...

PXI Chassis suits instrumentation systems.

Compliant to PXI Specification R2.0, Type 15 PXI chassis features 18-slot PXI backplane in 3U height. With modular design, chassis measures 4U high x 17 in. wide x 16 in. deep and is available as desktop or rack-mount unit. Its 64-bit backplane has controlled-impedance stripline design. Features include double-walled construction, bottom-to-top airflow design, EMC shielding, 4 DB9 connectors,...

Central Office Shelf includes multiple redundancy modes.

CO-Star(TM) AdvancedTCA(TM) Central Office Shelf is 19 in. 13U system that provides 14 slots that are electrically and mechanically compliant with PICMG 3.0 AdvancedTCA(TM) specification. Unit meets GR-63, GR-1089 UL/EN 60950 EN55024 for NEBS Level III and uses high flow rate and high pressure cooling. Other features include high-performance shelf management and high-performance backplane for 5...

Avoid Pressure Equipment Failure

This eBook gives a guide on how to prevent pressure equipment failure.

Server Chassis support ac and dc environments.

BladeCenter(TM) T standards-based, NEBS-compliant, COTS platforms support Carrier Grade Open Framework. DC-powered Model 8720-1RX and AC-powered Model 8730-1RX each feature two 1,300 W hot-swap power supplies with redundant configuration. Additional features include 4 HS blower modules, system management module, media tray with optical drive, filtered front bezel, and alarm panel. Chassis support...

Integrated Chassis support shelf management.

AdvancedTCA(TM) Systems feature 5-slot full mesh backplane with 2 hub slots, and independent fan controller that interfaces to temperature sensor on air exhaust and supports up to 200 W per slot. One configuation supports dual 4U high shelf managers, which are hot swappable and provide bussed IPMB interface. Chassis include dual 48 V inputs on rear, shielding, and 19 in. rackmount capability. AC...

Chassis offers 3-slot VME64X and CPCI backplane options.

Type 39 2U horizontal chassis utilizes 3-slot backplane allowing for recessing of cards, installation of drives, and cable pass-through. It is fully compliant to IEEE 1101.10/.11 specifications with horizontal mounting for 6U x 160 mm cards from front and 6U x 80 mm I/O cards from rear. Type 39 holds 1 x 3.5 in. HD and optional 1 x 5.25 in. slim line CD. It offers side-to-side airflow optimized...

Portable Chassis suits CompactPCI, PICMG 2.16 development.

Offered with PICMG 2.16 backplane options, 8-slot Type 32 cPCI portable tower features 2 x 5.25 in. HH devices and 350 W plug-in power supply with option for dual redundancy. Construction includes ergonomic handle, scratch-resistant, vinyl-clad, aluminum covers, and rubber-soled feet. Option for EMI spoons ensures EMC compliance, and cooling is achieved via 90 cfm fan. Rear I/O and system...

Chassis Units suit ATE systems.

Master Model GX7102 and Slave Model GX7112 include cable tray and mass-interconnect interfacing capabilities. They are both 6U in height, and can accommodate up to 14 PXI or cPCI instruments in 7 3U-only slots and 7 3U/6U slots. Cable tray allows wiring from PXI instruments to be routed to rear of chassis, as well as routing wires from external devices to front of PXI chassis. Hinged front door...

Two-Slot Chassis provides Ethernet-based connectivity.

Modular, dual DC-powered, DIN-rail mounted Model RD20-24 supports 2 modules, offering copper-to-fiber connectivity between copper-based devices on factory floor to control room. It can be equipped with line cards to support AUI, BNC, 10/100 Ethernet, single-strand, bi-directional wavelengths for double fiber capacity, Gigabit Ethernet, redundant links, 4-port switch, and remote management...

More performance and functionality for Sinumerik 828D CNC

Siemens new SINUMERIK 828D ADVANCED, SINUMERIK 828D and SINUMERIK 828D BASIC sets the standard for productivity enhancements of turning and milling operations on standardized machines and simplify the automation of grinding machines. See our video to learn all about it.