Gen 3 PXIe Chassis, Components target complex applications.
In addition to increasing system bandwidth to improve data streaming for capture/playback applications, Gen 3 PXIe chassis and Gen 3 system components provide- multi-channel and multi-chassis PXIe test systems for such applications as MIMO and PA/FEM. Products include M9019A 18-slot PXIe chassis with x8 Gen 3 PCIe links to each slot; M9037A PXIe embedded controller, and single- and dual-port Gen...
Read More »Rugged PC/104 Chassis are compatible with VITA 75 standard.
Available as standalone products, M-Max V75 Standard Size Chassis houses up to two PC/104 or similar-sized boards and dissipates around 28 W of heat. M-Max V75 Short Size Chassis can house one PC/104 or similar-sized board and dissipates about 14 W of heat. Machined from aluminum alloy T6061, both fanless models feature IP66 dust and moisture protection and are suitable for extremely tough...
Read More »
MicroTCA Chassis (1U) supports PCIe Gen 3 speeds.
Available with multiple power options, including- dual redundant configuration, Pixus PXS0108 features 6 Advanced Mezzanine Card (AMC) slots and 1 MicroTCA Carrier Hub (MCH) slot. Active backplane, alleviating need for power modules,- provides power manager- controls and limits management and payload power to max allowed limit for each slot. PCIe Gen 3 brings backplane speed to 8 GBps in...
Read More »
Curtiss-Wright Demonstrates Power® Architecture-based Glass Cockpit Display Solution and Advanced Air-Flow Through (AFT) Cooling for 3U Systems
Leading rugged COTS board/system vendor for embedded Aerospace Defense applications will showcase NXP-® technology-based 3U VPX technology NXP FTF 2016 Technology Forum (Pedestals 551 and 554), AUSTIN, Texas – Curtiss-Wright Defense Solutions today announced that it will feature two NXP-® Power-® Architecture-based COTS technology demonstrations during the NXP FTF 2016 Technology Forum....
Read More »
Considerations for Choosing a Plastic Injection Molder
Choosing a plastic injection molder is no small decision. There are a number of factors that play into your selection, and it's important to consider them all to ensure you find the plastic injection molding company that suits your unique needs. This eBook is your guide to identifying those factors to help you make an informed decision.
Read More »
Conduction-Cooled ATR Chassis meet military standards.
Available in ATR format or in specialty Small Form Factor designs, Conduction-Cooled Chassis support both OpenVPX and MicroTCA architectures. Units come in standard -½ and -¾ sizes for 3U or 6U boards. There are also options for MicroTCA.3 Hardened form factor as well as heat exchanged versions.- Enclosures are designed to meet MIL-STD-704, MIL-STD-810G, and MIL-STD-461. For specialty designs...
Read More »
ATR Format Enclosures have conduction-cooled design.
Available for both OpenVPX and MicroTCA architectures, conduction-cooled- ATR format chassis comes in -½ and- -¾ sizes for 3U or 6U boards. Options are also available for MicroTCA.3 Hardened form factor as well as heat exchanged versions. Designed to meet MIL-STD-704, MIL-STD-810G, and MIL-STD-461, products are also available with power interface boards for- incorporating VITA 62 or PICMG...
Read More »
NEBS-Compliant 15U ATCA Chassis exceeds 400 W/slot capability.
Leveraging Kaparel design and reverse impeller hot-plug cartridges, 15U AdvancedTCA (ATCA) chassis provides at least 400 W/slot cooling capability while meeting all compliance criteria and recommended practices. Design meets NEBS requirements, including- ability to cool chassis with- fan tray removed for 2 min, and- remains within FCC acoustic requirements. Both 40 and 10 GbE backplane options...
Read More »
Chassis Dynamometer Testing - Key Upgrade Considerations
Five reasons why the time is now to upgrade your chassis dynamometer testing system When it comes to chassis dynamometers, the roll assembly hardware can maintain high functionality for years. In fact, a wave of innovation in the 1980s led to many installations still in operation today. As the old adage goes, “if it ain’t broke, don’t fix it.” The catch is you’re likely in the...
Read More »
Compact Track Loader Undercarriages minimize vibration.
Available for select Bobcat-® compact track loaders, solid-mount and optional Roller Suspension™ system undercarriages feature dual-flange front idlers ride on rubber track's roller way. This, along with roller width,- reduces vibration. Optimizing ride and operational characteristics, optional Roller Suspension™ system incorporates dual flange front idlers, wider rollers, and mono-leaf...
Read More »Supermicro® Releases Next Generation UP Solutions Supporting Intel® Xeon® Processor E3-1200 v5 and Intel® Xeon® Processor D-1500
Industry's Broadest Range of Server, Storage and Embedded/IoT Solutions Deliver Maximum Performance per Watt for Enterprise, Data Center, Cloud and Embedded Applications SAN JOSE, Calif. - Super Micro Computer, Inc. (NASDAQ: SMCI), a global leader in high-performance, high-efficiency server, storage technology and green computing releases the industry's broadest range of Server Building Block...
Read More »
Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)
Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.
Read More »
