Pickering Interfaces Showcases New Switching Modules and Chassis at Productronica 2013 in Munich
Products Include LXI, PXI, Digital I/O, Microwave Multiplexer and PCI Ranges Munich, Germany – Pickering Interfaces, a leading provider of signal switching and conditioning solutions, will be showcasing it’s newest switching modules and chassis at productronica 2013. These products include PXI RF Solid State 6 GHz Multiplexers, 3U 16Amp PXI Switching Modules, 5Amp PXI Power Multiplexer...
Read More »AdvancedTCA System features switching shelf managers.
Featuring 19 in. rackmount design,- VT830 6-slot ATCA Shelf integrates switching shelf managers that provide Layer 2 GbE/10 GbE and Layer 3 GbE/10 GbE/40 GbE switching. System offers redundancy for all Field Replaceable Units, and has push-pull cooling, providing up to 375 W/slot of thermal management. Internal Scorpionware™ software can access information about current state of shelf or...
Read More »AdvancedTCA System features switching shelf managers.
Featuring 19 in. rackmount design,Ã- VT830 6-slot ATCA ShelfÃÂ integrates switching shelf managers that provide Layer 2 GbE/10 GbE and Layer 3 GbE/10 GbE/40 GbE switching.ÃÂ System offers redundancy for all Field Replaceable Units, and has push-pull cooling, providing up to 375 W/slot of thermal management. Internal Scorpionware™ software can access information about current state...
Read More »AM General Showcases Tactical Wheel Vehicle Innovation and Diversity at AUSA 2013
BRV-O™ JLTV, GMV 1.1, Modernized HMMWV Chassis and Tactical Vehicle Driving Simulator on Display WASHINGTON- — America's most experienced designer and builder of light tactical military vehicles, AM General, will showcase several offerings from its diverse Family of Light Tactical Vehicles and training operations at the 2013 Association of the United States Army (AUSA) Annual Meeting...
Read More »Choosing the Right Scrap & Chip Conveyor System
Understanding the different types of scrap and chip conveyors.
Read More »AM General Showcases Tactical Wheel Vehicle Innovation and Diversity at AUSA 2013
BRV-O™ JLTV, GMV 1.1, Modernized HMMWV Chassis and Tactical Vehicle Driving Simulator on Display WASHINGTONÃ- — America's most experienced designer and builder of light tactical military vehicles, AM General, will showcase several offerings from its diverse Family of Light Tactical Vehicles and training operations at the 2013 Association of the United States Army (AUSA) Annual Meeting...
Read More »Brushed Aluminum Chassis features 2-compartment design.
Constructed with 2 in. thick aluminum panels, Model PC-D600 supports EATX, ATX, and Micro-ATX motherboards. Unit offers pop-off side panels and front bezel, tool-less hard drive mounting, and clip-in dust filters. Three HDD cages inside HDD rack can also be removed without tools- and have 120 mm fans mounted to them. For water cooling, 240 mm radiator can be installed on left side over...
Read More »Brushed Aluminum Chassis features 2-compartment design.
Constructed with 2 in. thick aluminum panels, Model PC-D600 supports EATX, ATX, and Micro-ATX motherboards. Unit offers pop-off side panels and front bezel, tool-less hard drive mounting, and clip-in dust filters. Three HDD cages inside HDD rack can also be removed without toolsÃ- and have 120 mm fans mounted to them. For water cooling, 240 mm radiator can be installed on left side over...
Read More »Mid Tower Chassis offers side mounted radiator support.
Brushed aluminum- PC-10N allows for 240 mm radiator to be placed on hinged bracket and features railing mount design for motherboard. Chassis affords tool-free installation of six 3.5 in. hard drives and one 2.5 in. drive; additional 2.5 in. drive can be installed using 4 standard screws. While two 120 mm intake fans with air filters are in front and one 120 mm exhaust fan is...
Read More »Mid Tower Chassis offers side mounted radiator support.
Brushed aluminumÃ- PC-10N allows forÃÂ 240 mm radiator to be placed onÃÂ hinged bracket and features railing mount design for motherboard. Chassis affords tool-free installation of six 3.5 in.ÃÂ hard drives and one 2.5 in.ÃÂ drive; additional 2.5 in.ÃÂ drive can be installed usingÃÂ 4 standard screws. While two 120 mm intake fans with air filters are in front and...
Read More »Aluminum 19 in. Instrument Enclosures accept 3U equipment.
Available in 3U x 10.5 in. x 13.77 in., 3U x 19 in. x 13.77 in., and 3U x 19 in. x 17.71 in. sizes, INSTRUMET enclosures conform to DIN 41494 and IEC 297-1 standards for 19 in. equipment and accept standard 3U subracks and chassis. Two versions are available with ABS side handles for desktop use or tough diecast bail arm for portable applications. Base and rear panels have ventilation slots, and...
Read More »ISO-Certified Precision Machining and Contract Manufacturing Services from DFF
DFF is an industry leading contract manufacturer specializing in medium to high production precision machined components and electromechanical assemblies. Our 100 CNC machining centers and design-assist capabilities ensure our customers' needs are always met. Check out our video to learn more.
Read More »