Chain and Bearing Lubricators

Lubricating System can be remote mounted for hazardous areas.
Chain and Bearing Lubricators

Lubricating System can be remote mounted for hazardous areas.

PERMA PRO lubricator features metal housing, digital programming (1 week - 18 months), 3 reservoir sizes (250, 500, 750 cc) and LED function light. Digital display indicates remaining lubricant level for optimal control. PERMA PRO will deliver 360 psi of output pressure and can operate in temperature ranges from 4 to 140°F. Lubrication canister can be exchanged without tools or removal of...

Read More »
Centralized Lubrication System operates in harsh environments.
Chain and Bearing Lubricators

Centralized Lubrication System operates in harsh environments.

ExactoServe® can lubricate small, medium, and large bearings on machines with single lube point or hundreds of points. It has adjustable oil and grease feeders and positive displacement volumetric output injectors to lubricate machinery friction points. Four basic injector models cover broad discharge range. Each injector has built-in indicator pin to visually monitor each operational...

Read More »
Oil Systems provide filtration and cooling of lube oil.
Chain and Bearing Lubricators

Oil Systems provide filtration and cooling of lube oil.

Circulating Oil System is reliable in dirty and corrosive environments. Custom-engineered system provides continuous operation under adverse conditions. Construction involves welded sheet steel tank with mounting base for pump. Tank is sealed to prevent moisture and foreign matter from entering. It comes with filler cap with breather assembly and strainer. Baffle prevents sloshing, and minimizes...

Read More »
Liquid/Grease Metering Systems resist rust and corrosion.
Chain and Bearing Lubricators

Liquid/Grease Metering Systems resist rust and corrosion.

Quick Pack precision metering systems for liquids and greases feature reliability of Oil-Rite's PurgeX(R) injector pumps. Units are available in air and motor operated systems for liquid or grease in banks of 2 to 36 connected pumps. Each injector pump delivers from 0.0000 to 0.0120 cubic in. per cycle. Available with Buna-N or Viton(R) seals, pumps operate with liquid viscosities from 1 to...

Read More »
Can Tab Lubricator cuts oil use, reduces rejects.
Chain and Bearing Lubricators

Can Tab Lubricator cuts oil use, reduces rejects.

MicroCoat(R) lubrication method gives can makers control over amount of oil applied to pull tabs. It lowers lubricant use and reduces residual oil that can migrate from tabs and lids into can contents. It has precision spray valves that use low volume, low pressure (LVLP) air to coat pull tab stock with fine film of oil that keeps dies sharp, eliminates pressroom mist and puddles, and minimizes...

Read More »
Lubrication System extends die life.
Chain and Bearing Lubricators

Lubrication System extends die life.

By completely coating stock with fine, even film of oil, MicroCoat reduces downtime for tool sharpening and extends die life by as much as 300% in metal stamping operations. It uses Low Volume Low Pressure (LVLP) air to apply lubricants without dripping, mist, or waste. Compact, low-maintenance spray valves fit in tight press areas and can be mounted in any position above or below stock. Valve...

Read More »
Grease Pump dispenses precise amount.
Chain and Bearing Lubricators

Grease Pump dispenses precise amount.

PurgeX(TM) has single piece piston that dispenses up to 0.012 cu in. of grease per cycle. Grease is supplied from reservoir to injector pump. Reservoir location is not critical, and meters can be mounted in any position. Electrical energy from switch timer or computer will activate system. Buna N and Viton seals are used throughout for positive sealing. All air and impurities are completely...

Read More »
Lubrication Systems allow remote user control.
Chain and Bearing Lubricators

Lubrication Systems allow remote user control.

Quicklub® QLS 301 (grease) and QLS 311 (oil) automated lubrication systems include pump and integrated lubricant metering device. Systems allow for remote programming or remote manual run. They are available in 24V direct current models that monitor, or in 120V alternating current versions with no monitoring. Housed in NEMA 4 rated enclosures, QLS 301 and QLS 311 are suited for temperatures...

Read More »
Lubrication System eliminates overlubrication.
Chain and Bearing Lubricators

Lubrication System eliminates overlubrication.

ORSCO 170 lubrication system handles up to 16 lubrication points. Available as complete system or in 2 modular packages, ORSCO 170 offers 3-piece reservoir design, making fluid levels readily visible; minimal external piping; and automated lubrication that reduces unplanned downtime due to component wear or scheduled manual lubrication. ORSCO 170 utilizes delivery nozzles, and its lubricant...

Read More »
Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber
Sponsored

Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.

Read More »

All Topics