Varactors fit low voltage systems.
Series ZV950 hyperabrupt varactor diodes offer tuning range of 0.5 to 2.5 V, meeting requirements of 3 V frequency control and filtering systems. Characterized by close tolerance C-V curves, units provide high Q operation at reverse voltage as low as 0.5 V. Leakage current is typically 10 pA. For bias voltage of 0.5 V and frequency of 1 MHz, nominal capacitances of ZV950, ZV952, and ZV953 are 9.5...Read More »
Ceramic Chip Capacitors work in decoupling and filtering.
X5R series EIA class II capacitors are available in sizes 0402, 0603, 0805, 1206, and 2220. Capacitance tolerance is -Read More »
Ceramic Capacitors are compact and portable.
Type CMT multilayer ceramic chip capacitors are for filtering in telephone line tip and ring applications. Capacitors are available in 7 EIA sizes ranging from 0805 to 2225, in 5 standard voltage ratings ranging from 200 Vdc to 600 Vdc, in X7R or Z5U dielectrics, and with capacitance ratings ranging from 0.001 to 1.2 micro F. Tolerances are +/-5%, +/-10%, and +/-20% for X7R components, and +/-20%...Read More »
Non-Inductive Capacitor is rated up to 10,000 pF.
Metallized-polypropylene PGWA Series has wrap-and-fill construction with axial-lead terminations. Dissipation ratings are less than 0.04% and IR is better than 30,000 Kohms. Series features pulse rise time of 600 v/microsec and voltages to 15 KVdc. Seven values are supplied in standard decade sizes as well as special values and sizes. Applications include medical equipment, lasers, hi-voltage...Read More »
Things You May Not Know About Selling Your Manufacturing Business
This white paper outlines how to determine the valuation of your manufacturing business.Read More »
Polystyrene Capacitors are still available.
Although polystyrene materials are no longer being fabricated, polystyrene capacitors are still available with operational voltage ratings to 630 V. Available capacities range from 47 pF to 0.1 microfarads and tolerances to one percent and lower. Axial or radial lead terminations are offered.Read More »
Electrolytic Capacitor has extended cathode foil.
Aluminum Type 4CMC capacitor ranges in capacitance up to 420,000 microF at 16 V, 14,000 microF at 200 V and 2,300 microF at 500 V. It has three 0.062 in. diameters, solid copper mounting pins for reverse-proof mounting, and case sizes from 1.375 x 1.75 to 2 x 5.75 in. Type 4CMC replaces large snap-in or screw-terminal capacitors. Unit handles up to 50 amps of ripple current and is suitable for...Read More »
Impedance Instrument is traceable to NIST.
Model 1730 LCR Digibridge will measure, display, and output results of any two parameters, including: series or parallel capacitance, ac resistance, inductance, dissipation factor, quality factor, equivalent series resistance, impedance, reactance, and phase angle. It is suitable for fast throughput of component evaluation in high volume production environment. It has 0.1% accuracy, test...Read More »
Noise Filters suit clock output signal line applications.
KC series distributed constant circuit type noise filters offer capacitance tolerance of -Read More »
High Voltage Capacitor handles up to 450 Vdc.
Type AEB aluminum electrolytic capacitor in surface mount package provides up to 5,000 hr load life at 105 deg C. It is available in 7 vertical cylindrical case sizes ranging from 10 x 13.5 to 18 x 21.5 mm. Unit has capacitance range from 2.2 to 100 microF, rated voltage from 160 to 450 Vdc, and operating temperature of -20 to +105 deg C. Ripple current ratings are over 1 amp at 100 kHz....Read More »
Trimmer Capacitors suit RF circuitry applications.
FILMTRIM(R) plastic dielectric trimmer capacitors offer 4 capacitance ranges from 0.5 to 4.5 pF through 1 to 20 pF. Devices measure 6.8 x 5.4 x 2.6 mm, and use PTFE film. Quality factor (Q) is greater than 1000 when measured at 10 MHz, and operating temperature is -25 degrees to 85 degrees C. Offering moisture resistance, plastic film trimmers are suitable for flow and reflow soldering....Read More »
Gorbel Introduces New Mobile Fall Protection Unit
Providing adequate fall protection is always a critical consideration and one that in many cases can be difficult to ensure. The new Mobile Fall Protection Unit is designed to facilitate positive fall protection in applications that would typically be difficult or impossible to provide with standard methods. To learn all about the advantages and convenience, see our video.Read More »