Flexible Termination Capacitors suit high voltage applications.
High voltage flexible termination capacitors (HV FT-CAP) in X7R dielectric are offered with capacitance ranges from 62 pF to 0.27 -µF. They are available with capacitance tolerances of -Read More »
Flexible Termination Capacitors reduce ceramic chip failures.
Featuring flex performance up to 5 mm, High Voltage Flexible Termination Capacitors (HV FT-CAP) in X7R dielectric are available with DC voltage ratings of 500/630 V and 1, 1.5, 2, 2.5, and 3 KV. Flexible Termination system directs board flex stress away from ceramic body, mitigating flex cracks. RoHS-compliant, non-polar devices, with capacitance from 62 pF to 0.27 -µF and capacitance tolerances...Read More »
PFC Capacitors cover voltage range from 230-525 Vac.
EPCOS PhaseCap-® Compact series capacitors are available in types for voltages from 415, 440, 480, and 525 Vac. They also cover capacitance range of between 3 x 27 -µF and 3 x 251 -µF at 50 Hz, and compensate reactive powers ranging from 5-33 kvar depending on type. Designed for continuous operating temperature of 65-Read More »
Richardson Electronics Improves Ultra-Broadband Circuit Designs
Technologically Advanced RF, Microwave, and mmW Surface-Mount Capacitor The 550L Series UBCTM (Ultra-Broadband) Capacitor from American Technical Ceramics (ATC) provides reliable and repeatable Ultra-Broadband performance from 16 kHz to over 40 GHz. Desired features include: o Defense/Aerospace Extended Operating Temp. Range (-55-ºC to +125-ºC) o One-piece, Orientation-Insensitive Package...Read More »
Choosing the Right Scrap & Chip Conveyor System
Understanding the different types of scrap and chip conveyors.Read More »
SMT Aluminum Capacitors survive severe reflow conditions.
Offered in sizes from 10 x 10 x 10 mm to 18 x 18 X 21 mm, 140 CRH devices are rated to +125-Read More »
Electrolytic Capacitors range from 6.8-470 µF.
Available in 7.3 x 4.3 mm case size with 3 thickness options, ECAS Series has resin molded case structure, using multilayer aluminum foil for anode and solid conductive polymer for negative cathode. Surface mount units are rated from 2-16 Vdc with low impedance at frequencies up to 500 kHz, providing noise suppression, ripple absorption, and decoupling abilities on power lines. Operating from -40...Read More »
Snap-in Aluminum Power Capacitors are rated up to 450 V.
Available in 17 case sizes from 35 x 50 mm to 45 x 100 mm, Series 095 PLL-4TSI 4-terminal capacitors feature cylindrical aluminum case insulated with blue sleeve and pressure relief. Polarized aluminum electrolytic capacitors, with non-solid electrolyte, include voltage ratings from 350-450 V and capacitance/voltage combinations from 390 -µF at 450 V to 2,200 -µF at 350 V. Units also have rated...Read More »
Custom Ultracapacitor Modules target military applications.
Custom ultracapacitor modules employ either proprietary PowerBurst-® or Maxwell Technologies' BoostCap-® ultracapacitor cells, both of which are 2.7 V, UL 810A Recognized, and RoHS-compliant and feature capacitance values from 0.5-3,000 F. Passive or active cell balancing topology promotes efficient balancing between cells while minimizing additional current leakage. Offered in aluminum housing...Read More »
Multilayer Ceramic Capacitors range from 0.1-47 µF.
Available in X7R dielectric, KPS Series offers voltage options of 10, 16, 25, 50, 100, and 250 V. Units use lead frame technology to vertically stack 1 or 2 MLCCs into parallel circuit in single surface mount package. Frame isolates capacitors from PCB, minimizing audible, microphonic noise that may occur when bias voltage is applied. Providing up to 10 mm board flex capability, RoHS-compliant...Read More »
Multilayer Ceramic Capacitor is Pb-free and RoHS compliant.
Designed to save PCB space, KPS Series X7R MLCC features low ESR and ESL and capacitance values from 0.1-47 -µF. Series is available in 1210, 1812, 2220 case sizes and voltage options of 10, 16, 25, 50, 100, and 250 V. Non-polar device offers advanced protection against thermal and mechanical stress and provides up to 10 mm of board flex capability. Handling temperatures from -55 to +125-Read More »
ISO-Certified Precision Machining and Contract Manufacturing Services from DFF
DFF is an industry leading contract manufacturer specializing in medium to high production precision machined components and electromechanical assemblies. Our 100 CNC machining centers and design-assist capabilities ensure our customers' needs are always met. Check out our video to learn more.Read More »