
Electrolytic Capacitor provides operational rated life of 2,000 hrs.
Featuring glass-to-metal case seal to prevent capacitor electrolyte dry-out, CDE HHT Series Electrolytic Capacitor is suitable for military, aerospace, down-hole and off-road transportation applications. Operated up to +175°C temperature, unit comes in 20 mm diameter HHT case with 37 to 53 mm varying lengths. Available in nine values from 470 µF to 4,700 µF with 16 Vdc to 40 Vdc voltage...
Read More »
AC Filtering Film Capacitors are made of metallized polypropylene.
Featuring segmented film, MKP1847H series AC Filtering Film Capacitors provide rated voltages of 250, 310, 350 and 480 VAC. Delivering rated capacitance from 1 µF to 35 µF and ESR below 3 mΩ, unit is suitable for input and output filtering in renewable energy inverters and UPS systems. Products are designed to offer 85 % RH for 1,000 hours and stable capacitance.
Read More »
Vishay Intertechnology to Showcase Leading Passive Components and Custom Substrates at IMS2017
Featured Devices to Include High Frequency MLCCs, Surface-Mount Resistors, RF Capacitors, and Wire-Bondable RF Inductors MALVERN, Pa. - May 30, 2017 - Vishay Intertechnology, Inc. (NYSE: VSH) today announced its technology lineup for the 2017 IEEE MTT International Microwave Symposium (IMS2017), being held from June 4-9 at the Hawaii Convention Center in Honolulu, Hawaii. At the conference and...
Read More »
New Yorker Electronics Supplies Electrocube RC Networks Resistor-Capacitor Circuits
RC Series Prevents Arcing and Noise in Relay and Switch Contacts while Delivering High ‘Voltage Withstand Strength’ May 4, 2017 - New Yorker Electronics has rolled out the full series of Electrocube RC Networks Arc-Suppressing Resistor-Capacitor (RC) Circuits. Also known as resistors, resistor-capacitors or RC filters, Electrocube’s RC Networks are designed to prevent or substantially...
Read More »
Distillation 101: A Guide to Distillation and Separation Technologies
Distillation is a separation unit operation that involves multiple countercurrent-stage steps, separating two or more volatile components. This results in the contact of liquid and vapor most generally in counterflow. Distillation 101: A Guide to Distillation and Separation Technologies provides an in-depth look at everything you need to know about distillation, including: Design procedures Equipment components Applications
Read More »
Stacked Ceramic Disc Capacitors are RoHS compliant.
Available in ST1, ST2 and ST3 series models, Stacked Ceramic Disc Capacitors are suitable for electrostatic paint spraying and portable x-ray systems applications. Offering capacitance range from 130 to 1,000 pF per disc with voltage range of 6,000 to 12,000 volts, ST1 series features wire leads between each stage whereas ST2 and ST3 comes with solder tabs with 180° and 140° separation...
Read More »
PFC Capacitors meet IEC and CE compliance standards.
Used in filtering harmonics load in electric power systems, Power Factor Correction Capacitors feature self-healing properties. Designed on fully automatic numerically controlled winding machines for prevention of corona discharge and ionization, units are available in configurations in high harmonic, voltage and KVAR ranges and are bulletproof.
Read More »
VY1 and VY2 Series Ceramic Disc Capacitors are halogen-free and RoHS compliant.
VY1 and VY2 Series Ceramic Disc Capacitors are suitable for RFI and AC line filtering applications in home automation devices, E-meters and home appliances. Operated in -40°C to +125°C temperature, units offer 1,000 pF to 10,000 pF capacitance with ±20% tolerance. Capacitors are available with vertical kinked leads or straight leads with spacing of 10 or 12.5 mm for the VY1…Y5V model and...
Read More »
PUL-SI Series Aluminum Capacitors are RoHS compliant.
Available in case sizes ranging from 22 x 25 mm to 35 x 60 mm, PUL-SI Series Aluminum Capacitors feature a maximum ESR of 150 mΩ at 100 Hz and 2.80 A of ripple current. Offering 130 mΩ to 1950 mΩ of impedance at 10 kHz, units are suitable for smoothing, filtering, and energy storage in pulsed power applications. Operated in -25°C to +105°C temperature range, capacitors are housed in aluminum...
Read More »
Ceramic Capacitors are surface or through-hole mounted.
Suitable for 400Hz aircraft, defense and space applications, Ceramic Capacitors come with C48X dielectric material. Offering dissipation factor of less than 5.10-4, unit withstand high dV/dt, up to 10kV/μs. Providing maximum capacitance of 10μF 200V, capacitor material is developed from 200V to 5kV with chip sizes ranging from 1812 to 16080.
Read More »
New Ruggedized Axial-Leaded Aluminum Electrolytic Capacitor Distributed by New Yorker Electronics
High-Performance CDE Device Handles Up to 28A RMS Continuous Ripple Current and 20g Vibration; Meets Specs from -40° to +150°C NORTHVALE, NEW JERSEY, USA – New Yorker Electronics has just released the new Cornell Dubilier Electronics (CDE) line of axial-lead aluminum electrolytic capacitors. The new AXLH Series of ruggedized capacitors are designed for applications which require very...
Read More »
Ensure Safety, Reliability in Your Cement Plant with Aerzen Blowers and Compressors
Aerzen offers blowers and compressors for challenging cement applications such as pneumatic conveying from raw mill to raw meal silos, combustion air, cement silos fluidization, and more. At Aerzen, safety is our top priority. Check out our video to learn more.
Read More »