Calibrators

Temperature Calibrator uses dynamic load compensation.
Calibrators

Temperature Calibrator uses dynamic load compensation.

JOFRA® RTC-156 dry-block reference temperature calibrator employs dynamic load compensation system for temperature uniformity in insert, regardless of number or size of immersed sensors. Able to perform calibrations over -22 to +311°F range, unit features intelligent sensors that enable plug-and-play connectivity, color VGA display, and USB connection for communications and downloads....

Read More »
Dry Block/Liquid Bath Calibrator includes liquid container.
Calibrators

Dry Block/Liquid Bath Calibrator includes liquid container.

Suited for calibrating glass thermometers, short thermocouples, and thermoresistors, portable MicroCal TCS140 offers temperature range from -55°C from Tamb to 140°C. It has stability of ±0.035°C for dry block, ±0.02°C for liquid bath and radial uniformity of ±0.02°C for dry block and ±0.004°C for liquid bath. Heating and cooling speeds...

Read More »
Portable Temperature Calibrator suits on-site calibration.
Calibrators

Portable Temperature Calibrator suits on-site calibration.

Designed for use with immersion or insertion sensors, T-VALH enables on-site calibrations to be performed on hard to reach sensors without removal or disconnection of sensor cables and harnesses. All hot zone components are constructed from 304 stainless steel, while control unit is in watertight O-Ring sealed case with 6 ft long connecting lead. Hot zone accommodates 0.250 in. dia sensors and...

Read More »
Documenting Multifunction Calibrator CL310
Calibrators

Documenting Multifunction Calibrator CL310

The highly accurate, portable documenting multi-function calibrator can measure and source thermocouples, RTDs, current, voltage, frequency, and pulse trains. The arrow keys, direct numeric keypad entry, and three software driven function buttons combined with a large, backlit, menu-driven graphics display provide a powerful interface. All simulate modes can be programmed with dedicated setpoints...

Read More »
Temperature Calibrator suits medium temperature calibration.
Calibrators

Temperature Calibrator suits medium temperature calibration.

Black Body BBSM calibrates temperatures between 10-350°C with 0.1°C of resolution, accuracy of ±0.5% or minimum 1°C, stability of ±0.5°C, and emissivity of 0.97-0.98. It consumes 500 W of power and features auto-tune PID control. Offered with manufacturer's NIST traceable certificate of calibration and instruction manual, unit requires 20 min for stabilization,...

Read More »
Calibration Station includes data management capability.
Calibrators

Calibration Station includes data management capability.

Designed for use with single-gas ToxiRAE 3 monitor or QRAE II 1-4-gas monitor, AutoRAE Lite provides either 12-sec bump test or 2-min full calibration. Unit facilitates daily bump test process by testing alarms for oxygen, hydrogen sulfide, carbon monoxide, and lower explosive limit sensors. Fully automated station stores each calibrated unit's data and includes data management system that can...

Read More »
Dry Block Temperature Calibrators offer portable operation.
Calibrators

Dry Block Temperature Calibrators offer portable operation.

Suited for on-site calibration of RTDs, T/Cs, bi-metal thermometers, temperature switches and indicators, Models 350H and 350H2 feature temperature range from 10-350°C, stabilities of ±0.3°C (350H) and ±0.4°C (350H2), and accuracy of ± 1°C. They offer array of interchangeable multi-hole theromowell inserts with well dia of 25 mm and depths of 120 mm...

Read More »
Pressure Calibrator records parameters at 10 times/sec.
Chart and Paperless Recorders

Pressure Calibrator records parameters at 10 times/sec.

Providing accurate data under field conditions, reference-grade nVision can be configured to measure and record 200,000 pressure, temperature, current, and voltage measurements. Unit can display recorded data graphically, or graph measurements as they are being recorded. Pressure measurement accuracy is up to 0.025% of reading throughout operating temperature range of -20 to 50°C. Featuring...

Read More »
Gas Detector Calibrator works in harsh, remote locations.
Gas and Chemical Indicators

Gas Detector Calibrator works in harsh, remote locations.

Automatic Remote Gas Calibrator (ARGC) facilitates maintenance of S4000CH combustible gas detector by allowing calibration gas to be applied to catalytic bead sensor from easily accessible locations. Comprised of remote gas calibrator and solenoid valve, AGRC requires no electrical wiring or connectors and can calibrate gases at wind velocities up to 50 mph and temperatures to 75°C....

Read More »
Light Source features uniformity of output within 19 mm dia.
Lights

Light Source features uniformity of output within 19 mm dia.

Providing adjustable hemispherical light output, model ISS-8K-100-VAHP is based around 80 mm dia integrating sphere, which offers greater than 98% white-diffuse reflectance across visible and near infrared spectral range. It combines 100 W QH lamp, variable aperture, and interchangeable OD0, OD1, and OD2 attenuators, delivering output signal level step control from 0.1-100,000 cd/mÂ-²....

Read More »
Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber
Sponsored

Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.

Read More »

All Topics