Cable Components

Fiber Optic Modules provide bi-directional fiber certification.
Fiber Optic Components

Fiber Optic Modules provide bi-directional fiber certification.

Fitting into adapter bay, FiberTEK-® FDX Modules extend capabilities of LanTEK® II LAN Cable Certifiers to include certification of multi-mode and single-mode fiber optic cabling to Tier 1 standards. Single strand of fiber connected between handsets is tested at 2 wavelengths and in both directions simultaneously, while length of fiber is accurately measured. Field changeable SC, ST, and FC...

Read More »
Fiber Optic Modules provide bi-directional fiber certification.
Fiber Optic Components

Fiber Optic Modules provide bi-directional fiber certification.

Fitting into adapter bay, FiberTEKÂ-® FDX Modules extend capabilities of LanTEK® II LAN Cable Certifiers to include certification of multi-mode and single-mode fiber optic cabling to Tier 1 standards. Single strand of fiber connected between handsets is tested at 2 wavelengths and in both directions simultaneously, while length of fiber is accurately measured. Field changeable SC, ST,...

Read More »
Duct and Innerduct Blowing Accessories aid cable placement.
Fiber Optic Components

Duct and Innerduct Blowing Accessories aid cable placement.

Available in variety of sizes that accommodate 1-5 in. dia ducts, Duct and Innerduct Blowing Accessories eliminate air pressure leaks, air-flow control issues, inconsistent rope diameters, difficult equipment handling, over-crowded ducts, and other cable blowing problems. They include safety-locking control valve, 3/16, -¼, and 3/8 rope adapters, innerduct and conduit seal-offs, duct...

Read More »
Duct and Innerduct Blowing Accessories aid cable placement.
Fiber Optic Components

Duct and Innerduct Blowing Accessories aid cable placement.

Available in variety of sizes that accommodate 1-5 in. dia ducts, Duct and Innerduct Blowing Accessories eliminate air pressure leaks, air-flow control issues, inconsistent rope diameters, difficult equipment handling, over-crowded ducts, and other cable blowing problems. They include safety-locking control valve, 3/16, Â-¼, and 3/8 rope adapters, innerduct and conduit seal-offs, duct...

Read More »
Optical Beam Splitters

Prysmian Launches CasaLink(TM) MDU Connectivity in North America

Milan, September 23rd, 2008 - To complement the launch of CasaLight Xtreme(TM) fiber and the Verticasa(TM) MDU cabling system in North America, Prysmian is releasing and developing a range of connectivity accessories specifically designed for North American MDU applications. Collectively, these MDU connectivity accessories will be promoted by Prysmian under the new CasaLink(TM) system brand name....

Read More »
Optical Beam Splitters

Prysmian Launches CasaLink(TM) MDU Connectivity in North America

Milan, September 23rd, 2008 - To complement the launch of CasaLight Xtreme(TM) fiber and the Verticasa(TM) MDU cabling system in North America, Prysmian is releasing and developing a range of connectivity accessories specifically designed for North American MDU applications. Collectively, these MDU connectivity accessories will be promoted by Prysmian under the new CasaLink(TM) system brand name....

Read More »
Fiber Optic System replaces thousands of copper wires.
Fiber Optics

Fiber Optic System replaces thousands of copper wires.

Based on IEC 61850 and intended for protection and control systems, Multilin HardFiber System is made up of HardFiber Brick, HardFiber Cross Connect Panel, HardFiber Outdoor Fiber Cables, and Universal Relay IEC 61850 Process Card. System eliminates need to install and maintain thousands of copper wires used for signaling and monitoring in electrical substations, and provides identical interface...

Read More »
Fiber Optic System replaces thousands of copper wires.
Fiber Optics

Fiber Optic System replaces thousands of copper wires.

Based on IEC 61850 and intended for protection and control systems, Multilin HardFiber System is made up of HardFiber Brick, HardFiber Cross Connect Panel, HardFiber Outdoor Fiber Cables, and Universal Relay IEC 61850 Process Card. System eliminates need to install and maintain thousands of copper wires used for signaling and monitoring in electrical substations, and provides identical interface...

Read More »
IEEE Cable provides high speed connectivity.
Electric Cable

IEEE Cable provides high speed connectivity.

Supporting data transfer rates up to 800 Mbps, IEEE 1394b FireWire 800 hot-pluggable cables interconnect variety of computer peripherals and consumer electronic devices with plug-and-play operation. Backward compatible with IEEE 1394a standard, units allow users to connect FireWire 800 devices to legacy FireWire 400 ports. They are compatible with PC, MAC, SUN, and other IEEE-1394 equipped...

Read More »
IEEE Cable provides high speed connectivity.
Electric Cable

IEEE Cable provides high speed connectivity.

Supporting data transfer rates up to 800 Mbps, IEEE 1394b FireWire 800 hot-pluggable cables interconnect variety of computer peripherals and consumer electronic devices with plug-and-play operation. Backward compatible with IEEE 1394a standard, units allow users to connect FireWire 800 devices to legacy FireWire 400 ports. They are compatible with PC, MAC, SUN, and other IEEE-1394 equipped...

Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
Sponsored

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.

Read More »

All Topics