Bumpers

Elastomer Bumpers incorporate UV inhibitors.

TeMAX(TM) Bumpers include axial high-load models ranging in energy capacity from 100-17,000 lb-in., axial low-load models from 50-8,000 lb-in., radial units from 10-1,000 lb-in., and crane bumpers from 330-9,375 lb-ft. All are inert to most chemicals and lubricants, and have UV inhibitors to maximize life in outdoor environments.

Read More »

Self-Adhesive Molded Bumpers protect products from damage.

Available in square, cylindrical, hemispherical, and other kiss-cut shapes, Pres-On Bumpers adhere to plastic, wood, and metal surfaces to protect products from nicks, scratches, and scuffs. Non-staining, non-marring bumpers are made of polyurethane for impact resistance as well as vibration and noise dampening. Featuring peel-and-stick installation, products come in white, black, brown, clear,...

Read More »

Dock Safety Device guards against roll-off and damage.

Designed to prevent forklift roll-off and overhead door damage, XDS EXTRA DOCK SAFETY SERIES protects loading dock employees from dangers of drop-zone when door is open and no truck is present. Safety device features DOOR AND DOCK GUARD and acts as pallet stop to guard door panels and tracks from regular impact damage. Constructed to stop 10,000 lb rolling loads up to 4 mph, hydraulically...

Read More »
Sensing Bumpers offer sensitivity of 20-30 lb.

Sensing Bumpers offer sensitivity of 20-30 lb.

Hercules Sensing Bumpers are encapsulated in polyurethane shell that meets MIL-STD-810E salt fog requirements and is resistant to many chemicals, lubricants, and solvents. Surface is crush-resistant, impact-resistant, and abrasion-resistant. Available in widths of 4 and 7 in., heights up to 18 in., and lengths up to 16 ft, bumpers feature fail-safe wiring and bolt-on installation. They are suited...

Read More »
Safety Barrier features common member design.

Safety Barrier features common member design.

Dok-Guardian(TM) protects employees and material handling equipment from falling off vacant loading docks. Measuring 47 in. tall, Common Member option facilitates installation of multiple units, which are adjoined or connected at loading dock. Unit for heavy-duty Model SB-5000 is made from Â-¼ in. steel, while guard for light-duty Model SB-2500 is 3/16 in. steel. Both common member guards are...

Read More »
Sensing Edge conforms to application requirements.

Sensing Edge conforms to application requirements.

Flexion(TM) system suits situations where sensing edge is required to curve laterally. Interlinked mounting channel provides flexibility to follow natural contours of an application. Typical applications include curved sliding doors, medical tables, S-curve enclosures, and contoured pinch points. Each sensing edge has continuous length of sealed ribbon switch encased in extruded housing. It is...

Read More »
Micro Bumpers provide shock absorption.

Micro Bumpers provide shock absorption.

Suited for end-of-stroke cushioning, TecsPakÂ-® Micro Bumpers are made of UV- and chemical-resistant, thermoplastic elastomer. Material retains original performance parameters over millions of cycles. Out of 5 models, smallest model has rated energy capacity of 20 lb-in. Performance/mass ratio makes bumpers suited for mechanisms requiring small size and weight.

Read More »
Crash Guard provides loading dock safety.

Crash Guard provides loading dock safety.

Crash-Guard protects operators and safeguards forklift operations. When no truck is in loading bay, crash guard is automatically in top position, standing 400-500 mm above dockleveler. If door is open while no truck is docked at loading bay, unit serves as barrier and run-off-protection. Because guard is wider than doorway, truck will always be stopped during docking procedure. Crash-Guard also...

Read More »
Collision-Sensing Bumper provides 2-stage protection.

Collision-Sensing Bumper provides 2-stage protection.

Cushioning bumper provides one or two output signals, depending on severity of contact, that add protection for automatic guided vehicle and moving platform applications. Initial sensor generates output, which can be used for stop signal or contact alarm. If bumper continues to collapse, second sensor generates output that can initiate emergency stop or reverse. Bumper is available up to 14 in....

Read More »
Thermoformed Truck Bumper has chrome-like finish.

Thermoformed Truck Bumper has chrome-like finish.

HENDRICKSON AERO BRIGHT(TM) (HAB(TM)) mirror-finish, non-metal bumper delivers durability and impact-resistance. Bumper is a lightweight composition of formable, shiny, weatherable films and thick-sheet thermoforming technology. Product available for Class 5-8 commercial vehicles.

Read More »

All Topics