End Brushes feature nickel-plated cup.

End Brushes feature nickel-plated cup.

Stem mounted end brush with nickel-plating has high melting point and conforms to military specifications for nuclear applications. It is suited for weld preparation and cleaning, cleaning and finishing recessed areas or ID's, and die, mold and tool cleaning and polishing. Crimped wire (solid end) brushes are available in -½, -¾, and 1 in. dia with trim lengths ranging from 7/8 to 1 1/8 in.,...

Read More »
Premium Flow Through Parts Wash Brushes

Premium Flow Through Parts Wash Brushes

February 19, 2009 Brush Research Mfg. is proud to offer the best parts wash brush on the market today. Made with injection molded Polypropylene handles, these brushes are ergonomically designed to reduce any wrist strain and allow for increased pressure during cleaning. The brushes contain synthetic filaments for resistance to solvent cleaners. All metal parts are either stainless steel or brass...

Read More »
Three-in-One Scrubber is 100% recyclable.

Three-in-One Scrubber is 100% recyclable.

Versa-Scrub Green includes green plastic block and attachable scrub brush that are both 100% recyclable. Brush has fusion-welded, chemical-resistant polypropylene bristles, neither brush nor block contain metal parts, and standard threaded handle allows for scrubbing, scouring, and other types of cleaning through use of different cleaning tools. Molded-in hooks allow block to grab scrub pad...

Read More »
Abtex Introduces Long Trim Fiber Abrasive Brush

Abtex Introduces Long Trim Fiber Abrasive Brush

Abtex Corporation has introduced a new fiber abrasive brush that can deburr surfaces on multiple levels. The companys unique manufacturing process allows for the specification of long trim brushes with infinitely variable filament density and trim trim length. The pictured brush is used to deburr the surface of a green powder metal part. The part has three half-inch protrusions requiring that the...

Read More »
End Wire Brush suits heavy-duty fabrication applications.

End Wire Brush suits heavy-duty fabrication applications.

Controlled Flare End Brush (CFE) is designed to remove heavy weld spatter, flash, and scale in hard-to-reach areas such as right angles and corners. Patent-pending design reduces filament fatigue resulting in less wire breakage in heavy-duty fabrication applications. Product is available in both steel and stainless steel wire with .0104, .014, and .020 dia, while brush diameters include -½, -¾,...

Read More »
Size Matters: Weiler Offers Largest Line of 6' Grinder Accessories in Marketplace

Size Matters: Weiler Offers Largest Line of 6' Grinder Accessories in Marketplace

December 1, 2008 The 6 Right Angle Grinder market is increasing rapidly in the United States. Yet, no one has offered a complete package of accessory tools to address this growing trend, until now. Weiler Corporation introduces the largest line of 6 Right Angle Grinder accessories in the marketplace! Weiler's comprehensive assortment of fast-cutting, high quality Grinding & Cutting Wheels, Flap...

Read More »
Abtex Expands Its Short Part Deburring System Capability

Abtex Expands Its Short Part Deburring System Capability

Abtex Corporation has increased the maximum part length that its double-head, flow-through, short part deburring system can deburr. In response to customer requests and reported application requirements, this popular system can now deburr parts ranging in length from 1 inch to 7.5 inches. The maximum length had been 4.5 inches. With one pass, the new machine simultaneously deburrs both ends of an...

Read More »

Brush-Life Sensor suits 42-frame DC gearmotors and motors.

Integrated into motor housing, built-in electronic brush-wear sensors indicate when either of brushes is wearing out. Unit allows OEMs to electronically monitor brush wear to effectively maintain uninterrupted operation of these permanent magnet DC gearmotors or motors. It eliminates guesswork in brush maintenance and inspection. Gearmotors and motors that are equipped with unit can also...

Read More »
Deburring Brushes come with abrasive filled nylon filament.

Deburring Brushes come with abrasive filled nylon filament.

Available in Diamond Abrasive filled nylon filament, Miniature Deburring Brushes are suited for finishing ceramic, glass, aerospace alloys, and tool steel. Brushes for thru holes (81 Series) and bottom end applications are available for holes as small as .024 and 1/8 in., respectively. Twisted-in-wire deburring brushes can be used by hand or rotated under power, and are suited for wide range of...

Read More »
Deburring Brushes utilize advanced filament technology.

Deburring Brushes utilize advanced filament technology.

Burr-Rx(TM) disc brushes are made of black nylon filaments co-extruded with high aggression ceramic grains. Constructed with steel shell, they provide dimensional stability, and are produced with 2 in. bore that allows for direct mounting on equipment without need for adapters. Burr-Rx brushes are suited for deburring materials such as inconel, stainless steel, and titanium and are also available...

Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Sponsored

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.

Read More »

All Topics