New Bridges Products

PCI Express-to-PCI Bridge supports up to 6 devices.

Fully compliant to PCI Express to PCI/PCI-X Bridge Specification, Revision 1.0, XIO2000 allows seamless bridging between legacy PCI devices to current PCI Express applications without concern over compliance and interoperability issues. Device has x1 lane upstream port connection to PCI Express root complex, providing support for up to 6 x1 PCI endpoint devices on its downstream side. Product is...

Multi-Protocol Framer suits Ethernet over SONET/SDH systems.

EXtendAR 48M(TM) XRT95L53 maps and de-maps data traffic between SPI-3 interface and standard SONET/SDH interfaces. It supports 48 DS3/E3 and fractional DS3/E3 framers on single chip, as well as flexible encapsulation and framing features including GFP, LAPS, ATM, and PPP/BCP. Device terminates section overhead and line overhead on OC-48/STM-16, 4xOC-12/, 16xOC-3 interfaces. Standard 16-bit...

Modular Dock Bridge offers 15,000 lb capacity.

Designed to span gap between warehouse and trailer, LoadHog(TM) mounts to warehouse floor using 4 anchor bolts and requires no concrete work. Unit stores inside warehouse and allows dock door to close tight against floor. Arc design and raised side housings provide structural integrity that withstands 3- and 4-wheel forklift traffic. Available in 5, 6, and 7 ft widths, dock bridge features 17 in....

Wireless Analog Bridge/Transceiver has 4 channels of I/O.

Model RT12-4411 Wireless analog bridge(TM)/Wire Replication Transceiver converts and replicates wired sensor system into seamless wireless connection between any 4-20 mA, 0-5 Vdc, or 0-10 Vdc signal or sensor and data logger, controller, or SCADA equipment. Bi-directional, full duplex, 12-bit analog I/O enables complete control and monitoring. Features include real-time clock, event logger,...

Understanding Water Hammer

DFT Inc's engineers have been working with professionals in a range of industries for decades, helping to identify and resolve the underlying causes of water hammer. In this eBook you will learn about many of these common causes, how they impact your system and some of the basic changes you can make to eliminate them. In this eBook you will learn: What causes water hammer and why it is such a persistent problem. The role design plays in reducing the risk water hammer poses to your system. DFT's professional recommendations for coping with water hammer.

Server connects ARCNET and Ethernet networks.

Enabling users to access ARCNET network from Ethernet network, Model AI-SRVR functions as ARCNET server by executing communication requests from Ethernet client. Device will receive ARCNET packets and send data to Ethernet clients or reverse process for transmitted packets. Configuration is accomplished through EIA-232 serial port, and once configured, resident web server can be accessed to...

Wireless Device suits industrial networking applications.

Used with Ethernet switches and other Ethernet-ready devices, AirWorks AWK-1100 may be operated as AP, bridge, or AP client to provide ready access to WLAN. Industrial IEEE 802.11g wireless product features Wi-Fi Protected Access security capability and redundant power inputs. Able to authenticate and authorize wireless users by IEEE 802.1x and RADIUS, plug-and-play solution offers DIN-Rail...

Wireless Ethernet Bridge features 15 mile range.

XPress Ethernet Bridge (XEB(TM)) facilitates communication between host and client Ethernet connections at speeds up to 1.5 Mbps. Operating in 900 MHz ISM band, product is suited for applications where RF environment is full of interference from 2.4 GHz signals emanating from 802.11 networks, portable phones, and microwave ovens. In indoor/urban applications, units can communicate through as many...

Silicon Storage Bridges enable plug-and-play SATA HDDs.

Providing transparent, canister-level emulation of Fibre Channel (FC) disk drives, BR-2401 endow SATA HDDs with plug-and-play functionality in FC storage environments. It features dual 4 Gb FC ports, SATA-II NCQ support, ARM 966 processor, and built-in data integrity algorithms. Product lets users select various SATA HDDs and deploy multiple SATA HDD types within one storage enclosure. Data path...

Ethernet Bridges/Modems utilize 900 MHz technology.

With transmit power of 500 mW and receive sensitivity of 104 dBm, SEM Ethernet Bridges and HopNet Modems utilize omni-directional antennas for 20 plus mile range. SEM Series provides high-speed wireless connectivity between Ethernet devices, while HopNet serial and Modbus modems provide high-speed wireless connectivity between serial devices. Based on 900 MHz FHSS WIT910 radio module, both...

Serial-to-Ethernet Module is electrically isolated.

Enabling designers to add Ethernet connectivity to IP networks, 1 x 2.5 in. SocketEthernet IP(TM) module integrates Ethernet bridge and complete TCP/IP protocol stack into one universal socket. Model MTXCSEM-HV connects serial devices to IP network, supporting DTE speeds to 230 Kbps. It meets EN 60601-1 requirements for medical electrical equipment safety and includes 10/100BaseT Ethernet, LED...

ISO-Certified J&D Tube Benders Delivers Rapid Tubeline Fabrication Services

J&D Tube Benders' laser cutting and machining services provide accurate and complex features on tubes of all shapes and sizes. Check out the video to learn more!