Brackets

Brackets

Vertical Mounting Bracket supports rear LED lamps.

Suited for vehicles with limited fitting space, Vertically Mounted Bracket is made from ABS plastic and accepts 80 Series rear lamp modules. Square rear single- and multi-function lamps can be clicked into place and hardwired. In event of damage, lamps can be unclipped individually and replaced as necessary. Each lamp is 12/24 dual voltage capable with current draw of 0.04-0.42 A at 13.8 V,...

Read More »
Brackets

Wall Mount Bracket features folding design.

Designed to support heavy panels, cables, and equipment, EZ-FOLD(TM) Bracket folds to 2.5 in. in height and can be stacked or stored in small spaces. Arms extend to 15 in. when unfolded. Once securely mounted, hinges do not bear weight and both arms are supported by stud or backboard mounting screws. Weight limit is further strengthened by double-row screw mounting.

Read More »
Heavy-Duty Wall Bracket offers alternative to wall mount racks.
Brackets

Heavy-Duty Wall Bracket offers alternative to wall mount racks.

Available in 2, 4, 6 and 8 rack unit sizes, EZ-FOLD Wall Mount Bracket folds to 2.5 in. in height for stackable storage/transport and is used to mount panels and equipment in confined spaces. Arms extend to 15 in. when unfolded to accommodate equipment, panels, and cable storage space, and dual hinges have no effect on capacity after secure mounting. Both arms are supported by stud or backboard...

Read More »
Mounts

Heavy-Duty Cable Entry Bracket speeds cable installation.

Installed with 3.5 in. hole saw, Arlington CE1RP cable entry bracked accelerates installation of bundle of Class 2 low-voltage wiring. Reinforced slotted cover holds bundle of low-voltage cable securely and allows pass-through of HDMI connectors. When tightened, mounting wing screws hold bracket securely against wall. Leveling can be accomplished by rotating bracket and tightening screws, and...

Read More »
Architectural Railing Brackets are suited for indoor or outdoor use.
Guardrails and Railings

Architectural Railing Brackets are suited for indoor or outdoor use.

Part of Interna-Rail® and Speed-Rail® lines, Model 87-8 is designed to attach various sizes of handrail to 1Â-½ in. IPS railing posts, while Model 88-8 uses same components with larger mounting plate to attach handrail to wall. Both fittings are machined from aluminum alloy 6063 and feature clear anodized finish as standard. Brackets can also be supplied in dark bronze anodizing...

Read More »
Wireless Access Point Wall Bracket enables horizontal mounting.
Brackets

Wireless Access Point Wall Bracket enables horizontal mounting.

Accommodating hard lid and other environments where ceiling mounts are not possible, Model 1029-00 Wall Mount Bracket ensures wireless access points (APs) are securely placed in recommended horizontal configuration so they can achieve optimal coverage. Product is constructed of white powder-coated steel and works with access points from most manufacturers. Conduit, raceways, and cable can be...

Read More »
Miscellaneous Controls

ABB Delivers Turbine Upgrade Project to Cleco Power Plant in Louisiana

ABB to provide Symphony Control System and mechanical upgrades for turbines at Cleco's Dolet Hills Power Station Orlando, Florida - ABB, the leading power and automation technology company, was selected by Cleco Power LLC to supply its Dolet Hills Power Station in Mansfield, Louisiana, with a Distributed Control System (DCS) and various mechanical components for a turbine controls upgrade...

Read More »
Photoelectric Sensor Brackets offer flexible positioning.
Brackets

Photoelectric Sensor Brackets offer flexible positioning.

Compatible with ML17 and M18 series, MH01-M18 Mounting Brackets enable mounting of photoelectric sensors with M18 threading in packaging, material handling, and general automation applications with multi-axes alignment needs. Half-clamp style brackets allow sensor to be turned on several axes for adaptation to changing alignment requirements. Once fastened on 0.5 in. dia rod or bolt, half-clamp...

Read More »
Wall Brackets support most minisplit condensers.
Supports

Wall Brackets support most minisplit condensers.

Offering equipment mounting alternative to ground-level support pads, Models WBB-300 and WBB-500 hold up to 300 lb and 500 lb, respectively. Weather-resistant units are constructed of heavy-duty, powder-coated, perforated steel or stainless steel for coastal or corrosive environments. All brackets are fully adjustable with mounting widths of 3-30 in. and depths of 10Â-½-16 in. Removable...

Read More »
Steel City® Pre-Fab Box Bracket with Far-Side and Cable Support Combines Three Products in One
Brackets

Steel City® Pre-Fab Box Bracket with Far-Side and Cable Support Combines Three Products in One

MEMPHIS, Tenn. - Thomas & Betts' Steel City® Pre-Fab Box Bracket with Far-Side and Cable Support combines three component parts into one, simplifying installation and reducing inventory. Compatible with four-inch and 4 11/16-inch boxes, it can be either right- or left-stud mounted. We integrate the box bracket, the far side support, and the cable support into a single component to reduce...

Read More »
Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life
Sponsored

Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life

For the ultimate in heat transfer fluid performance, Paratherm offers HR Heat Transfer Fluid that is engineered specifically for closed loop liquid phase heating. When it comes to characteristics such as thermal stability and fluid degradation, Paratherm HR leads the industry in value and performance. See our video to learn how Paratherm is raising the bar for heat transfer fluids.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers