Enhanced Free Printing for Custom Seal

American Castings Corp. is a manufacturer of security seals for nearly 100 years. Since our inception metal strap, cup and twist seals as well as lead and wire seals have been our standard. Plastic padlock seals and bolt locks have been another high performance security product developed over the years. Security labels, envelopes and tapes are among the newer product features we offer for...

Read More »
High-Security Bolt Lock is C-TPAT - ISO/PAS 17712 compliant.

High-Security Bolt Lock is C-TPAT - ISO/PAS 17712 compliant.

Made of plastic-coated steel, Model PBLT-2-H is classified as high-security container seal that meets U.S. Custom and Border container seal requirements. Keyless, single-use bolt provides tamper evidence and tool-free application. Typically, 5/16 in. diameter shaft is inserted through hasp of locking mechanism affixed to door or access point. Locking cap is then hand-applied, positively clicking...

Read More »
Tapco Adds Grade 5 Norway Countersunk Head Elevator Bolt

Tapco Adds Grade 5 Norway Countersunk Head Elevator Bolt

(St. Louis, MO) Tapco Inc. added IFI Grade 5 No. 1 Norway Flat Countersunk Head elevator bolts to their existing product line. The Grade 5 elevator bolts have greater proof load, minimum yield strength and minimum tensile strength than traditional Grade 1 or Grade 2 bolts -- allowing them to better withstand the additional forces exerted on elevator belt lap splices or other heavy-duty...

Read More »
Titanium Bolts and Screws suit aerospace applications.

Titanium Bolts and Screws suit aerospace applications.

Manufactured from titanium alloy TI-6AL-4V, externally threaded NAS and MS Fasteners are suited for applications onboard commercial and military aircraft ranging from actuators to seat track assemblies. Parts can be manufactured to achieve 160 ksi tensile strength and 95 ksi shear strength. Available uncoated or with aluminum or cadmium plate, fasteners feature thread sizes from -04 to -8 and...

Read More »

Swivel Eyebolts are offered in 4 sizes.

StarPoint swivel eyebolts include VRS-M22; VRS-1/4 in. 20 UNC; VRS-5/16 in. 18UNC; and VRS-7/16 in. 14UNC models. Units adjust to direction of pull which allows full engagement of bolt and insures safe lift. Forged from high-tensile steel, they are also 100% electromagnetically crack tested. Smaller sizes allow more versatility for lifting smaller loads.

Read More »
Spinning Clinch Bolts have self-retracting feature.

Spinning Clinch Bolts have self-retracting feature.

Intended for metal panels as thin as .040 in., PEM® Type SCBR(TM) spinning clinch bolts incorporate self-retracting feature that enables integrated captive screw to remain retracted when disengaged. Controlled clinching action permanently captivates retractable screw-and-spring combination in metal sheet during fastener installation and lets screw spin freely, accelerating attachment of mating...

Read More »
Matco-Norca Stocks Fully Compliant Bolt & Gasket Sets

Matco-Norca Stocks Fully Compliant Bolt & Gasket Sets

Brewster, NY - Matco-Norca offers Bolt & Gasket Sets with both non-asbestos and red rubber gaskets. These gaskets are available in both full face and ring style sets. Matco-Norca's non-asbestos gasket (APG style CAN-750) is constructed of aramid and other synthetic fibers and bonded with nitrile rubber. Non-asbestos gaskets meet ASTM F152 and are suitable for use with water, air and a variety of...

Read More »

Thr Dyson Corp. to Supply Fasteners for the Manhattan Bridge Rehabilitation

The Dyson Corporation in Painesville, Ohio has been awarded a contract from Skanska Koch, Inc. to provide bolt, nut, washer and plate assemblies for the rewrapping of the main cable, and hand rope cable replacement on the Manhattan Bridge Rehabilitation project. Originally completed in 1909, the Manhattan Bridge is one of several suspension bridges that span the East River. Accomodating...

Read More »
Heavy-Duty Elevator Bolt is built for strength, reliability.

Heavy-Duty Elevator Bolt is built for strength, reliability.

Intended for use in heavy-duty applications, Reference (Ref) 70 style bolt can be employed on pulleys over 20 in. in diameter and exhibits most strength when coupled with oval washer that serves to increase effective size of bolt head and holding power. Product is available in zinc-plated steel and 18 sizes from -¼-20 x -½ in. to 3/8-16 x 2 -½ in.

Read More »

Nylon Nuts, Screws, and Bolts suit outdoor applications.

Made of Nylon 6.6, Nuts, Screws, and Bolts are resistant to oils, rust, corrosion, abrasion, and chemicals. Nylon also provides vibration resistance, as well as electrical insulation due to its dielectric constant. Screws and bolts are offered in several head types including binder, round, flat head, fillister, hex, socket, countersunk, and pan head. All threads are imperial with slotted and...

Read More »
3Sixty Mission Critical Launches New Service Offering UPS as a Service As A Cost Effective Alternative to UPS Equipment Ownership
Sponsored

3Sixty Mission Critical Launches New Service Offering UPS as a Service As A Cost Effective Alternative to UPS Equipment Ownership

At 3Sixty Mission Critical, we specialize in maintaining the performance and uptime of our customer's mission-critical applications. Our services are comprehensive and designed to take on the entire burden of maintenance. Our "UPS as a service" is just another example of how we develop out of the box solutions to help our customers operate more efficiently; see our video to earn more.

Read More »

All Topics