New Boards Products

I/O Boards suit real-time applications.

Series NI 651x consists of optically-isolated, digital I/O devices for applications in discrete, batch, and process automation. Each includes watchdog timers, programmable power-up states, programmable input filters, change detection, and 24 V logic levels, which offer connection to sensors and actuators and are software programmable without jumpers. Series provides NI-DAQmx driver software...

Control Boards offer digital/analog measurement and control.

Configurable Controls 5000 Series incorporates processor, power source, and multiple input and outputs, depending on model. Front operator panel displays numbers, indicators, pushbuttons, switches, or pots. Controls feature onboard 10 A relay, 1 A solid-state relay, and external solid-state relay. Large output ports include onboard 30 A relay and 3 A solid-state relay. Other features include...

Controller/I/O Cards feature Intel Pentium 4-M processor.

Controller card MIC-3318 is equipped with 400 MHz system bus, 512 Kb on-die L2 cache, support for DDR memory, and 2 Ultra ATA 33/66/100 high-speed IDE drives. Model MIC-3753 is a 72-bit digital I/O card for CompactPCI bus. I/O lines are divided into nine 8-bit I/O ports, allowing user to configure each port as input or output. General-purpose MIC-3780 is a multi-channel, counter/timer card for...

PXI Card offers 4 high-speed digitizer channels.

UltraFast UX3131 3U PXI Card allows engineers and scientists to acquire all 4 channels at sampling rates to 25 MS/s for SONAR, LIDAR, and ultrasonic measurements. Card combines 12-bit resolution, 8 input ranges, programmable input offset, up to 64 MS memory, and optional high-speed digital inputs. Each channel can be programmed with 1 of 8 input ranges Ã-

Cold Forming: A Cost Effective Alternative to Machining Small Parts

Cold forming offers tight tolerances, dimensional stability, and advanced surface finishes, while also saving you in raw material wastes costs.

Embedded Board delivers industrial Ethernet.

Single-port serial Ethernet communication board, PS100B, brings RS232/422/485-based industrial devices under control of 10 Mbit/s Ethernet network. It incorporates selectable RS232/422/485 serial interface and transfers industrial device data up to 115 Kbit/s. Offering voltage from 9-30 V, it accommodates power requirements in industrial automation environments. Features include device management...

PCI-Based DAQ Boards feature plug-and-play operation.

DaqBoard/1000(TM) series provides 16-bit, 200-kHz A/D converter and 16 single-ended or 8 differential analog inputs. Boards feature synchronous analog, digital, and frequency I/O as well as DMA bus mastering. On-board scan sequencer permits user to select up to 512 channel/range combinations and scans all channels contained in sequence at rates to 5 Ã-µs/channel. Up to 4 DaqBoards can be used...

PCI Board supports CANbus connection.

CAN-PCIL(TM) consists of non-intelligent, short form-factor, PCI board that is available in single- or dual-channel versions. Acting as CAN interfaces for PCI systems, product is available with CANopen software support and optional opto-isolation. Product supports Linux and Windows operating systems, has 3.3 and 5 V PCI interface, and occupies one slot.

Adapter Board adds DVB-T reception to analog TV.

MicModule allows TV manufacturers to add digital terrestrial video broadcast functionality to existing analog chassis. It is equipped with universal tuner and can be directly connected to any VHF/UHF input. MicModule uses DRX 8872C DVB-T COFDM demodulator IC and MDE 9515B digital audio, video, and graphic controller IC for decoding and processing of digital MPEG-2 signal. CI slot supports major...

FPGA Board allows hardware reprogramming via USB.

MORPH-IC(TM) uses MPSSE interface of FTDI's FT2232C to program and reprogram FPGA via USB interface, making it suitable for applications requiring flexibility and in-circuit hardware upgrade-ability. Contents of FPGA can be defined over USB on initialization, by loading from an Altera format configuration file, and can also be reloaded and/or redefined in 0.2 seconds. Second channel of FT2232C is...

Digitizer PCI Card has 8 high-speed A/D channels.

UltraFast UF3132 provides 8 analog input channels on one card; up to 16 cards can be combined in industrial PC. Product employs eight 12-bit A/D converters with max sampling rates of 25 MSamples/sec, provides simultaneous sampling, and has up to 256 MSample onboard signal memory. Each channel has 8 software-selectable input voltage ranges from Ã-

SEALTITE® Fittings and Cord Grips Offer Longer Lasting Protection

Anamet Electrical's 316 Stainless steel SEALTITE® fittings and UL-listed cord grips protect sensitive wiring components from fluids, corrosive contaminations, bumps, and abrasions with a steel core and liquid tight conduit jacket. Check out this video to learn more.