VME System offers rapid development and evaluation.

VME System offers rapid development and evaluation.

Easy PowerPC 750FX is a true turnkey VME system incorporating VME 2eSST-enabled PowerPC 750FX SBC with 256 Mb DRAM, 64 Mb Flash, 2 PMC sites, 36 Gb SCSI disk, 2U rack, embedded software, and 1 month access to technical support hotline. Suited for full range of mission-critical COTS applications, system is equipped with VxWorks 5.5, LynxOS, and Linux 2.4. Small demo and benchmark programs are...

Read More »

Motion Controls work with popular absolute encoders.

Model PCI-208 and 3U Euro205X Motion Coordinators(TM) are available with Heidenhain's EnDAT and Tamagawa absolute encoder interfaces. Model PCI-208 can accommodate up to 8 axes of standard or absolute encoders in any mix on same hardware, while Euro205X handles up to 4 axes. Stand-alone and pcb level designs utilize Daughter Board and Feature Enable Code system to mix and match controller...

Read More »
PCI Communication Cards support 3.3 and 5 V signals.

PCI Communication Cards support 3.3 and 5 V signals.

Able to support universal PCI connectors for 3.3 and 5 V signals, models PCI-1602UP/1604UP/1610UP/1611U/1612U/1620U provide surge protection for trigger conditions. They are protected from abrupt voltages to 2,500 Vdc, come with 16PCI952/16PCI954 UARTs with 128-byte FIFO, and deliver transmission rates to 921.6 Kbps. Models PCI-1604UP/1611U also support optical isolation. Models...

Read More »
Digital I/O Card combines optoisolation and high voltage.

Digital I/O Card combines optoisolation and high voltage.

PCI-bus card, Model PD2-DIO-128i supplies 64 digital inputs and 64 digital outputs, each line with its own optoisolator. I/Os are configured in fixed banks of 16 lines. Each line runs at 10 kHz max and works from external supply voltage of 12-32 V. Outputs generate 500 mA/channel peak and 200 mA/channel continuous with max of 1 A/port. Operating on 3.3 or 5 V PCI-bus backplanes, board includes 33...

Read More »

Bridge Module adds wireless connectivity to serial devices.

Airborne(TM) Serial Bridge Module provides RS-232 interface and specific command set for OEMs looking to add wireless 802.11 connectivity to products with built-in serial interfaces. Interface supports baud rates from 300-921.4 Kbps and is capable of both full or half duplex mode and hardware and software flow control. Built-in web server provides configuration of serial interface, baud rates,...

Read More »
PC/104 Card provides 8 counters.

PC/104 Card provides 8 counters.

Using FPGA chip for all counting and I/O, stackable Model 4I36 has 32-bit up/down counters with quadrature count inputs and per channel index inputs. It has selectable TTL and RS-422 levels on quadrature and index inputs. Able to count in normal quadrature mode or up/down mode, product employs digital filtering on encoder inputs. Max count rate with TTL and RS-422 inputs is 4 and 10 million...

Read More »
Ethernet-Based Instruments offer continuous data acquisition.

Ethernet-Based Instruments offer continuous data acquisition.

DaqBook/2020/2001/2005Â-® feature built-in 10/100BaseT Ethernet interface capable of transferring acquired data back to PC at 200 Kreading/s. Units provides 16-bit, 200 kHz A/D, which can be expanded to over 1,000 I/O channels. Four 10 MHz counters synchronously measure frequency and count pulses concurrent with analog measurements. Packaging includes integrated carrying handle and expansion...

Read More »

Half-Size PCI Card is suited for use in compact systems.

Based on IntelÂ-® 815E embedded chipset, EPC-2327 can be used in small backplane-based systems or as standalone controller card. It can be configured with 1.26 GHz IntelÂ-® PentiumÂ-® III and 1.2 GHz Celeron(TM) processors and features integrated video solution, temperature monitoring, and full revision control and change management. Measuring 7.3 x 4.8 in., card also features Intel...

Read More »
Bi-Directional Data Interface simulates target system.

Bi-Directional Data Interface simulates target system.

Ported from PMC BiSerial II, PC/104p-BiSerial features completely isolated FIFOs with 32-bit ports, 16-40 MHz 485 buffers with programmable termination, and FPGA to implement complex state-machines. It can be used to simulate target system such as airplane, missile, or other vehicle to interact with equipment that would be connected to target systems. Using BiSerial, test, debugging, and...

Read More »

All Topics