New Boards Products

Data Acquisition Module suits industrial applications.

PCM-ADIO single board, PC/104 data acquisition module combines 32-channel, 16-bit A/D converter; 4-channel, 12-bit D/A converter; 16 lines of digital I/O; and event trigger control. Onboard microprocessor controls input and configurations, conversion rates, FIFO depth, output ranges, calibration, and digital I/O settings without use of jumpers or potentiometers. Automatic conversion rate is...

PCI Boards simplify general-purpose data acquisition.

Complete with 256-position A/D channel/gain queue, Models RCP 1612 and 3212 store up to 2,048 samples in on-board FIFO buffers. Three 8-bit digital I/O ports can be configured as inputs or outputs, and support hardware handshaking, strobe I/O, and bi-directional protocols. Each board includes six 16-bit counter/timers. Two are used internally; 4 are available to measure frequency, count events,...

Single Board Computer suits space-restrained applications.

QCard expandable embedded controller consists of 2 x 2.5 in. SBC that incorporates up to 1 MB of memory, communications capabilities, and expansion I/O bus. Powered by 16 MHz Motorola 68HC11F1 microprocessor, controller also features 512K Flash, and 128-512 K RAM, and 320 bytes EEPROM. On-board I/O includes 8 digital I/O lines with counter/timer capabilities, 8 analog inputs, synchronous SPI...

Digitizers integrate pre- and post-trigger capability.

Dual-channel Models ATS1250 and ATS1220 are 12-bit PCI waveform digitizers for ultrasonic imaging and inspection, shock and vibration, and scientific applications. ADC and ASoPC technologies provide 60 dB signal-to-noise ratio. Units provide independently programmable inputs from -

Quick Guide to Components for Medical Furniture

When designing for a hospital environment, it is essential to consider the small components that enable your application to perform to a high level. Hospital furniture has different users, so it's not only patients you need to think about, but also caregivers.

Communication Module provides 8 RS-232/422/485 ports.

MultiComm(TM) serial controller module delivers 8 independent asynchronous serial channels, 10 Mbps Ethernet, and 2 CAN ports for embedded PC/104 computer systems running Windows-®, Linux-®, and real-time operating systems. Serial ports, 16C550C-compatible, operate at up to 921.6 kbps and are configured in pairs as 8 RS-232 or 4 RS-232 and 4 RS-422/485 ports capable of controlling up to 132...

PC-104 Board features optically isolated I/O.

Model 104-IDIO-16 is a 32-channel PC-104 utility board featuring 16 optically isolated input and 16 optically isolated solid-state outputs. Non-polarized inputs may be driven by dc sources of 3-31 V or ac sources at frequencies of 40 Hz to 10 KHz. Models are available with or without input change-of-state detection. Input channels have 34-pin IDC-type header. Outputs drive up to 1 A each and are...

I/O Boards combine digital I/O and counter/timers.

Multi-function I/O boards, Model APC424/464 for desktop PCI and Model AcPC424/464 for CompactPCI, each replace 2 I/O boards to conserve card slots. The 424 models provide 40 digital I/O channels for TTL and differential signals plus four 16-bit counter/timers, while 464 models have 64 TTL digital I/O and 4 counter/timers. Digital I/O channels are bi-directional to meet almost any input/output...

Mezzanine Card provides 16 analog channels.

M-Module M35N can be configured with 16 single-ended, or 8 differential voltage or current analog channels, each with acquisition time of 5 -µs with 14-bit resolution. Analog inputs are optically isolated from digital computer bus. M-Module is suited for open bus systems, such as those based on CompactPCI, PCI, PM, or VME. It can also be deployed in standalone, busless embedded computer systems....

Starter Kit facilitates embedded system development.

Embedded System Module Starter Kit features ESM mezzanine card, universal ESM carrier card for power and I/O interfaces, and all cables and linking connectors needed to start development. Kit can be ordered with ESM based on Motorola PowerPC or one of several Intel x86 processors. Module includes memory, system I/O, and I/O connectors. Carrier card on which ESM is mounted provides additional I/O,...

Mezzanine Card adds processing power to telecom systems.

Pentium M-based AM7501 Advanced Mezzanine Card (AMC) provides hot swappability and integrated system management, which enable individual AMC modules to be remotely monitored, controlled, and replaced in field. Suited for use as control plane processor for optical and wireless infrastructure, card features server-class E7501 North Bridge, dual Gigabit Ethernet channels, and I2C-based Intelligent...

SEALTITE® Fittings and Cord Grips Offer Longer Lasting Protection

Anamet Electrical's 316 Stainless steel SEALTITE® fittings and UL-listed cord grips protect sensitive wiring components from fluids, corrosive contaminations, bumps, and abrasions with a steel core and liquid tight conduit jacket. Check out this video to learn more.