EtherNet/IP, Profinet Platform foster network connectivity.
Electronic Adapters

EtherNet/IP, Profinet Platform foster network connectivity.

Serving EtherNet/IP adapters and Profinet devices, 1-Port RapID(TM) Platform supports EtherNet/IP November 2010 release and Profinet v2.2. It is fully functional and pre-tested for EtherNet/IP and Profinet conformance, including electronic schematics, BOM, and layout files as well as all necessary software, stacks, and development environment. Ethernet physical layer includes protection...

Read More »
Miscellaneous Controllers

Controller Board supports collaborative video walls.

Based on PCIe 2.0 technology, Matrox Mura(TM) captures 4 full 1080p HD inputs and simultaneously drives 4 monitors at up to 2,048 x 1,080, while maintaining full RGB 888 image quality. Controller features x16 bus interface providing 64 Gbps of bandwidth, and 10-slot switch fabric that delivers 512 Gbps upstream and downstream for total throughput of 1 Tb/s. All-in-one board captures content from...

Read More »
Miscellaneous Controllers

Controller Board supports collaborative video walls.

Based on PCIe 2.0 technology, Matrox Mura(TM) captures 4 full 1080p HD inputs and simultaneously drives 4 monitors at up to 2,048 x 1,080, while maintaining full RGB 888 image quality. Controller features x16 bus interface providing 64 Gbps of bandwidth, and 10-slot switch fabric that delivers 512 Gbps upstream and downstream for total throughput of 1 Tb/s. All-in-one board captures content from...

Read More »
Electronic Boards

High-Density xTCA Subsystems accommodate demanding applications.

As Next Gen ATCA Carrier Blade for 4 AMCs, BCC-301 supports GigE switching and 20 Gbps serial RapidIO-® with multicast support for high-bandwidth, low-latency applications. It enables modular AMC configurations and is scalable with 2-, 5-, 6- and 14-slot ATCA chassis options. Also available, HCD2100 AMC module supports Freescale QorIQ(TM) Communications P4 Series Architecture(TM) processor...

Read More »
The Next Wave of Intelligent Design Automation
Sponsored

The Next Wave of Intelligent Design Automation

In the amount of time it takes to set up a meeting to discuss just one design, engineers can now explore designs exponentially. Generative design has catalyzed a paradigm shift in product development. This shift not only drastically decreases the time it takes to design a product. It also opens the door to design options that might never have been imagined by engineers on their own.

Read More »
Electronic Boards

High-Density xTCA Subsystems accommodate demanding applications.

As Next Gen ATCA Carrier Blade for 4 AMCs, BCC-301 supports GigE switching and 20 Gbps serial RapidIOÂ-® with multicast support for high-bandwidth, low-latency applications. It enables modular AMC configurations and is scalable with 2-, 5-, 6- and 14-slot ATCA chassis options. Also available, HCD2100 AMC module supports Freescale QorIQ(TM) Communications P4 Series Architecture(TM) processor...

Read More »
USB Serial/Hub Module facilitates system development efforts.
Miscellaneous Boards

USB Serial/Hub Module facilitates system development efforts.

Measuring 75.04 x 23.37 mm, FT4232H USB serial/hub module features FTDI FT4232H USB 2.0 Hi-Speed to UART/MPSSE chip that supports data rates of 40 Mbps and can manage all USB signaling and protocols. Unit includes 2 USB ports via dual USB connector and one via 0.1 in. pitch DIL connector pins, and 4 serial interfaces that can be configured for asynchronous or synchronous operation. Included...

Read More »
USB Serial/Hub Module facilitates system development efforts.
Miscellaneous Boards

USB Serial/Hub Module facilitates system development efforts.

Measuring 75.04 x 23.37 mm, FT4232H USB serial/hub module features FTDI FT4232H USB 2.0 Hi-Speed to UART/MPSSE chip that supports data rates of 40 Mbps and can manage all USB signaling and protocols. Unit includes 2 USB ports via dual USB connector and one via 0.1 in. pitch DIL connector pins, and 4 serial interfaces that can be configured for asynchronous or synchronous operation. Included...

Read More »
Development Platform suits embedded systems requiring USB 2.0.
Miscellaneous Boards

Development Platform suits embedded systems requiring USB 2.0.

Incorporating all hardware and software needed for development of embedded systems, Vinculo Development Platform includes Vinculum II VNC2-64 dual-channel USB Host/Slave controller for USB 2.0 interfacing. VNC2 combines 16-bit/48 MHz CPU core, 256 KB of Flash memory, and 16 KB of SRAM memory, and provides support for external UART, FIFO, PWM, GPIO, and SPI Slave/Master interfaces. Measuring 55.38...

Read More »
Development Platform suits embedded systems requiring USB 2.0.
Miscellaneous Boards

Development Platform suits embedded systems requiring USB 2.0.

Incorporating all hardware and software needed for development of embedded systems, Vinculo Development Platform includes Vinculum II VNC2-64 dual-channel USB Host/Slave controller for USB 2.0 interfacing. VNC2 combines 16-bit/48 MHz CPU core, 256 KB of Flash memory, and 16 KB of SRAM memory, and provides support for external UART, FIFO, PWM, GPIO, and SPI Slave/Master interfaces. Measuring 55.38...

Read More »
Pentek Takes Leadership Role in Delivering Advanced COTS Solutions Targeting Military Applications
Electronic Boards

Pentek Takes Leadership Role in Delivering Advanced COTS Solutions Targeting Military Applications

Ruggedized VPX boards first to offer Xilinx Virtex-®-6 FPGAs for demanding anti-IED systems, airborne and signal intelligence applications SAN JOSE, CA, MILCOM- Again taking a leadership role, Pentek, Inc. today unveiled the first in a family of ruggedized boards for high-performance military and avionics applications utilizing the industry's most advanced FPGA technology. Pentek's 53xxx...

Read More »

All Topics