Blowers

Motor-Blowers target portable machines.

Motor-Blowers target portable machines.

FLO-TEK 700(TM) Motor-Blowers are available with brushless or brush-type drive motor. Fan and housing design is optimized for performance in range of 70-90 in. sealed vacuum up to 300 cfm. Approximately 10 in. in diameter and height, blowers are available in 120 and 240 single-phase ac and 24, 36, and 48 dc voltages. They are suited for central vacuums, material handling, food service equipment,...

Read More »
Plastic Blower delivers up to 979 cfm.

Plastic Blower delivers up to 979 cfm.

Eight inch Compaxial Blower features 1/3 hp motor and 9-blade polypropylene fan encased in powder-coated steel grill. Blower and canister are corrosion-, UV- and chemical-resistant polyethylene with handles for transport. Unit can be set up to ventilate or evacuate airflow with canister locking system. Design allows user to remove canister and ducting from outlet side and attach it to inlet side...

Read More »

Rotary Lobe Blower is 6 in. long and weighs 1.75 lb.

Utilizing assembly process that minimizes leak paths within blower chamber, compact RL Series blower delivers air flow up to 2 cfm, pressure to 2 psi, and vacuum to 4 in. hg. It can be mounted either vertically or horizontally, and is equipped with standard 3/8 in. OD hose barbs and 6 in. wiring harness. With 12 V brushless dc motor and permanently lubricated timing gears, blower is for suited...

Read More »
Regenerative Blower features closed-loop control.

Regenerative Blower features closed-loop control.

Maxi-Aeration DO System optimizes aeration process by maintaining set-point dissolved oxygen rate in aeration basins. VFD continuously monitors DO levels to provide optimum oxygen level for bacterial growth. Unit is rated for applications up to 1,450 scfm, 11.5 psi, and 150 hp.

Read More »
Seal Stuff In, Seal Stuff Out
Sponsored

Seal Stuff In, Seal Stuff Out

One of the best ways to make sure that your machinery stays up and running in the face of adversity is to make sure that it's properly sealed. Of course, it's not always easy to determine whether the integrity of your seals are up to par. How can you tell when you have a problem?

Read More »
Blower Heater suits harsh environments.

Blower Heater suits harsh environments.

Corrosion-resistant Model HD3D provides comfort heating and freeze prevention in harsh, corrosive, dirty, and wet environments. With stainless steel brackets, hose-down unit can be directly mounted to wall or ceiling. NEMA 4X control box is located on front of heater. Wiring connector provides watertight seal in event of replacement of motor, limit control, or elements. Heater is suited for...

Read More »

Regenerative Blower suits concrete applications.

Offered as drop-in replacement for DR 707 regenerative blower, DR757 features compact construction and is powered by 4 hp motor that draws less than 7 A. Design, based on sound attenuation method, utilizes noise cancellation technology; further reductions are achievable through use of sound enclosures.

Read More »
Dual-Wire Brushless DC Blower has compact design.

Dual-Wire Brushless DC Blower has compact design.

DC blower incorporates embedded drive and commutation electronics in brushless design, providing 2-wire input. Impeller and rotor are balanced to provide vibration-free, low-noise operation. With 2.9 in. dia and 2.8 in. long design, 12 V unit produces 10 in. of H2O pressure and has max flow rate of 18 cfm. Windings for other voltages are available upon request. Product suits applications where...

Read More »
DC Fans and Blowers suit electronics applications.

DC Fans and Blowers suit electronics applications.

Arconix-® brushless DC fans are available in 13 different sizes from 25-172 mm with thicknesses from 10-51 mm. Offered with choice of 7 housing types, products operate at speeds from 1,600-13,000 rpm with airflow capabilities from 1.49-121 cfm. Arconix DC blowers deliver concentrated spot-cooling at noise levels down to 21.61 dBA. They are available 5, 8, 9, and 12 cm sizes with speeds from...

Read More »

Exhaust System suits laboratory applications.

Self-contained, Vektor(TM) High Plume Dilution Blower employs discharge nozzle design that entrains additional ambient air to mix with potentially hazardous exhaust fumes. Additional air dilutes lab effluent, displacing exhaust high above roof and away from building makeup air systems. Mixed-flow impeller is available in AMCA type C or type B spark-resistant construction, for laboratories that...

Read More »

All Topics