New Bits Products

Free Reconditioning with WIDIA(TM) Solid-Carbide Drills

(LATROBE, PA) - For a limited time, customers that purchase a new WIDIA(TM) solid-carbide drill are eligible for a free drill reconditioning. The free reconditioning is good for eligible drills purchased through June 30, 2010. (Customers have until September 30, 2010 to redeem the cards). WIDIA's a world leader in milling inserts and end mills - now's a great time to try our drills and holemaking...

Auger Bit penetrates hidden fasteners during wood drilling.

Nailkiller(TM) Auger Bit features reinforced tip that pushes hidden nails to side when it makes contact. Product's dual cutting edges enable it to slice through hidden fasteners twice per revolution. Dual-reamer-edge design prevents splinters from piercing electrical wire housings and wood fragments from clogging conduit or water pipes with narrow IDs. Bits use 7/16 in. shank with power groove,...

Black Oxide Drill Bits feature 135-

With black oxide finish that provides lubricity to protect bit from corrosion and reduces friction for efficient chip removal, drill bits feature 3-flat secure-grip shank to prevent slipping in drill chuck. ThunderboltÃ-® Black Oxide drill bits are designed for metal, wood and PVC, while Silver & Deming (S&D) Bits are suited for heavy-duty metal drilling, automotive/body shop and metal...

Carbide Drill Bits suit SDS+ rotary hammer drilling.

Featuring 4-cutter solid carbide heads, MX4 Carbide Drill bits have 90Ã-

Site Amenities & Furnishings: Key Considerations When Sourcing A High-Volume Manufacturer

This white paper looks at the six key considerations when sourcing a high-volume manufacturer of site amenities and furnishings. Download now to find out more.

OSG Tap & Die, Inc.

NEXUS OSG has raised the bar with the next evolution of Vanadium High Speed Drills, the NEXUS. This latest product from OSG features a unique 40 degree helix, coupled with a sharp thinning point designed to; reduce work hardening, improve finish, and eliminate exit burrs. The NEXUS also features WD1(TM), OSG's latest development in coating technology for drills. Higher oxidation temperatures,...

Drills combine benefits of modular and indexable tools.

Consisting of steel body coupled to high-strength steel head with 4 coolant holes, KSEM PLUS(TM) Modular Drills are available in standard lengths of 5, 8, and 10 x diameter in inch and metric sizes from 1.250-2.756 in. and 31.75-70.00 mm. Body and head are mated with Flexible Drilling System coupling system, which uses radially activated locking screws for minimal runout. Tools are suited for...

Solid Carbide Drill works with extra-hard materials.

Phoenix drill series includes 3xD and 12xD sizes, available in diameters from 1-12.7 mm in .1 mm increments, with coolant through from 2.5 mm and Helica coating. While specially designed flute and point geometry minimize cutting forces and optimize chip control, ultra-fine grain composition delivers wear resistance and toughness to accommodate higher speeds and feeds. Internal coolant makes tools...

Indexable Drill also performs turning and boring operations.

Designed for large diameter hole drilling, WDX Series has nickel-plated steel body that accepts same insert geometry for both outer and inner cutting edges, allowing use of all four of insert's cutting edges. Featuring Super ZX-coated carbide insert grades ACP300 and ACK300, unit machines wide range of steels, stainless steels, cast irons, and exotic materials. Drill is available in coolant...

Carbide Drill Bits are designed for durability, efficiency.

Ranging from 5/32-Ã-½ in. in size, SOLID ROCK CARBIDE(TM) SDS Plus drill bits (DW5501-DW5541) are used for drilling holes in hard concrete, reinforced concrete, block, and pan decking. Bonding system, used to affix tip to flute, promotes durability and bit life in tough applications. Featuring full head, 4-cutter design, bits also have 4 flutes to optimize debris removal and increase drilling...

Indexable Carbide Insert Drill suit large dia applications.

Available in coolant-through 2XD, 3XD, and 4XD body lengths, WDX Series drills holes and can also perform operations such as turning and boring. Nickel-plated steel body accepts same insert geometry for outer and inner cutting edges, and design allows use of all 4 of insert's cutting edges. Featuring Super ZX-coated carbide insert grades ACP300 and ACK300, WDX is capable of machining steels,...

Locon Sensors Withstand Extreme Temperatures

Locon Sensor Systems offer robust sensor solutions for even the most severe environmental conditions. Their line of high-temp inductive sensors and their cylindrical photoelectric series can operate in temperatures up to 250 degrees Celsius. See our video to learn more.