Belt Pulleys

Belt Pulleys

Motorized Pulleys offer integrated shaft encoder.

BDL motorized pulleys allow conveyor system operators to synchronize product movements. Shaft encoders utilize SKF or SNR pulse outputs to monitor motorized pulley movement and control conveyor belt speed, position, torque, and rotational direction. Accurate conveyor belt movements, up to ±0.0002 in. at speeds of 19-500 fpm, are achievable. Mounted with 2 brackets, pulleys range from...

Read More »
Timing Belt Pulleys feature self-contained hub fastener.
Belt Pulleys

Timing Belt Pulleys feature self-contained hub fastener.

Available in double, single, or no flange styles, Series A 6H 3 consists of 1/5 in. pitch pulleys for 3/8 in. wide belts. Fairloc® integral hub fastening system facilitates phase adjustment, timing, position adjustment, and frequent removal problems while adding positive metal-to-metal fastening strength along entire width of pulley. Pulleys fit onto shafts from 3/16-3/8 in. diameter and...

Read More »
Timing Belts and Pulleys minimize noise and vibration.
Belt Pulleys

Timing Belts and Pulleys minimize noise and vibration.

Constructed of abrasion-resistant polyurethane and steel or stainless steel tension members, ARC-POWER PLUS belts are available as open-ended, spliced and welded endless, and truly endless. They provide 100% tracking in both running directions without flanges. Based on overlapping tooth arrangement, smooth interaction with idler and tensioners running on toothed side of timing belt eliminates...

Read More »
Timing Belt Pulleys feature integral hub fastener system.
Belt Pulleys

Timing Belt Pulleys feature integral hub fastener system.

Designed for Â-¼ in. belts, Series A 6D16 MXL .080 pitch timing belt pulleys are made of gold iridite aluminum alloy and are available in 12 to 72 grooves. Bore sizes range from .125 to .250 in. and ODs range from .286 to 1.813 in. They are available in double- or no-flange types and feature Fairloc® integral hub fastener that enables frequent position adjustment while adding positive...

Read More »
CMAA Crane Buyer's Guide
Sponsored

CMAA Crane Buyer's Guide

CMAA has organized this Buyer's Guide to promote standardization and to assist prospective buyer's of electric overhead traveling cranes in selection of equipment most suitable for their applications.

Read More »
Drum Motors solve material handling challenges.
Belt Pulleys

Drum Motors solve material handling challenges.

With motor, transmission, and bearings totally enclosed in drum shell, Series BLD conveyor drive systems produce noise levels of 50 dB, meeting OSHA requirements. Rated from 0.11-7.5 hp and running at 96% efficiency, drum motors range in diameter from 3.18-12.6 in. with face widths from 7.8-67 in. Belt speeds range from 23-1,369 fpm. Mounted with 2 brackets, sealed-for-life units are virtually...

Read More »
Motorized Pulleys are rated to 30 hp.
Belt Pulleys

Motorized Pulleys are rated to 30 hp.

Built for belt conveyors, pulleys are designed with motor and gearbox enclosed within hermetically sealed steel shaft, making them suited for use in harsh environments. Model 220H, with 8.5 in. dia, is available rated to 7.5 hp; models 320M and 320H, both with 12.64 in. dia, are rated to 10 hp; models 400M and 400H, with 15.91 in. dia each, are rated to 20 hp; and model 500H, with 19.72 in. dia,...

Read More »
Dual-Drive Pulley System suits bulk conveyor operations.
Belt Pulleys

Dual-Drive Pulley System suits bulk conveyor operations.

Motorized, head-pulley/tail-pulley system features self-lubricating gearbox and enclosed drive design, which eliminates pinch points that can cause personal injury. Pulley diameters range from 8.5-31.5 in. with powers ranging from 0.5-180 hp. Motorized pulleys are hermetically sealed and all internal electro-mechanical components run in continuous oil bath.

Read More »
Plastic Idler Components suit corrosive environments.
Belt Pulleys

Plastic Idler Components suit corrosive environments.

Made from UHMW or Teflon®, Plastic Idler Components eliminate need for ball bearings and metal parts. V-belt and round belt pulleys, blind- and through-bore idlers, sheaves, rollers, and roll end bearings are made from various plastics, dependent upon desired wear characteristics. With functionally equivalent to metal parts, they produce less noise due to lack of ball bearings. Custom...

Read More »
Belt Pulleys

Pully Drive System integrates with linear module applications.

LPB integrated geared pulley drive system is available in sizes from 70 to 120 mm with ratios of 1:1, 3:1, 5:1, and 10:1. Gearbox has flange output, allowing it to be nested inside pulley, eliminating need for right angle gearbox, couplings and/or additional bearings. LPB design increases radial load capacity associated with belt and pulley applications, greatly increasing output bearing life.

Read More »
Dies & Stamping Services with Over 25 Years of Experience
Sponsored

Dies & Stamping Services with Over 25 Years of Experience

PDS is an established leader in progressive die stamping, with a reputation for providing precision and value that dates back more than half a century. Through extensive capabilities and a staff of seasoned professionals, we set the standard for quality, delivering flexible services that can meet the needs of the most challenging requirements. See our video to learn more.

Read More »

All Topics