Li-Ion Battery Charger is housed in 2 x 2 mm DFN package.
Standalone, linear Model LTC4065L charges single coin cell Li-Ion batteries up to 250 mA without overheating device or surrounding components. IC offers 4.2 V Ã-
Read More »
Battery Charger handles 1- to 16-cell NiMH/NiCd batteries.
Requiring no microcontroller or firmware programming, Model LTC4010 includes charge initiation, monitoring, protection, charge termination, and constant current control circuitry. Unit can charge batteries at rates up to 4 A from range of input supplies and wall adapter voltages from 5.5-34 V. Both -dV and dT/dt charge termination can be active simultaneously, in addition to programmable safety...
Read More »AC/DC Combo Adapter increases notebook usability.
Able to be tucked into carrying case, ThinkPadÃ-® 72 W Slim AC/DC Combo Adapter provides AC or DC power to notebook computer and recharges system battery simultaneously. Unit plugs into any AC wall outlet, vehicle DC power outlet, or available airline power outlet. In addition to abovementioned notebook PC, adapter works with ThinkPad Multiple Battery Charger II or ThinkPad Port Replicator...
Read More »Intelligent Car Charger accommodates any dockable iPod.
Available with black or white glass finish, AutoPod(TM) Car Charger mounts anywhere in vehicle via velcro tabs to charge iPod, iPod mini, or iPod nano battery from cigarette lighter or 12 V outlet. Design is complementary to and fits all dockable iPods. Featuring transparent lens, intelligent status light glows red for power on status, amber when charging iPod, and green when iPod's battery is...
Read More »
Cold Forming: A Cost Effective Alternative to Machining Small Parts
Cold forming offers tight tolerances, dimensional stability, and advanced surface finishes, while also saving you in raw material wastes costs.
Read More »Fast Chargers produce minimal heat effect on battery.
Using IGBT power electronics technology, Express UniMAX Models 10 and 15 fast charge smaller capacity batteries typically used in Class III trucks safely. They are designed for max charge output rates of under 320 A, requiring single battery connector similar to standard batteries. They can work with or without battery module ID, allowing any battery to charge on any charger. Modular,...
Read More »
Battery Charger IC does not require microcontroller.
With input voltages from 4.5-34 V, LTC4011 charges 1- to 16-cell NiMH/NiCd batteries at rates up to 4 A. Features include 550 kHz synchronous PWM current source controller, -dV and/or dT/dt fast charge termination, NiMH top-off charge, and operating temperature range of 0-85Ã-
Read More »
Battery Chargers automatically select USB or AC inputs.
Standalone, dual-input LTC4076 and LTC4077 charge single-cell Li-Ion batteries from wall adapter or USB power sources. They use constant-current/constant-voltage algorithm for charging, with charge current programmable up to 950 mA from wall adapter supply or 650 mA from USB supply, while auto-sensing presence of voltage at each input. Model LTC4076 features programmable C/x charge current...
Read More »Battery Charger recharges ThinkPad notebook batteries.
ThinkPadÃ-® External Battery Charger enables users to recharge batteries for Z Series ThinkPad notebooks without ThinkPad system. Unit features charging current of 3.6 A max and delivers output voltage of 12.6 or 16.8 Vdc nominal. Measuring 1.22 x 3.58 x 6.34 in., charger has operating temperature range of 43Ã-
Read More »Solar Battery Charger folds to pocket size.
PowerFilmÃ-® AA charges 2 or 4 AA batteries in 4 or 8 hours of full sun, respectively. Unit also operates effectively in varying sunlight conditions and protects batteries from over-charging damage. Once folded, unit automatically beings charging, and includes lights that confirm if batteries are charging or fully charged.
Read More »
Li-Ion Battery Chargers are housed in 2 x 2 mm DFN package.
Standalone linear Models LTC4065/LTC4065A charge single-cell Li-Ion batteries up to 750 mA without overheating device or surrounding components. They offer timer termination, recharge, trickle charge, and C/10 detection. Units require no external MOSFET, sense resistor, or blocking diode. Featuring charge current monitor output, 4.2 V 0.5% accurate float voltage, and 5% charge accuracy, ICs are...
Read More »
Don't Let Your Money Drain Down the Hole...Drill Steel with Euroboor
As a globally recognized manufacturer of industrial grade portable tools, Euroboor is at the forefront of drilling and cutting technology. Our reputation as an industry leader is built on robust products that fit a wide range of industrial cutting and drilling applications. See our video to learn more about all of our quality products.
Read More »
