Wirthco Engineering, Inc. Introduces Battery Doc® 2/4/8 Amp and a 900 mA Portable Battery Charger/Maintainers
MINNEAPOLIS, MN - WirthCo Engineering, Inc. introduces Battery Doc #20085 2/4/8 amp 12 volt & 900mA 6/12 Volt portable battery chargers/maintainers. Having the UL, cUL, TUV and CE listings for this products means that our Battery Doc Chargers have been independently tested and evaluated, and it meets the stringent UL requirements , said Andrew Wirth, V.P. Sales & Marketing of WirthCo Engineering,...
Read More »Portable Battery Chargers maintain 12 V batteries.
Available in 1 A Wall Mount I, 2 A Wall Mount II, 1.25 A Sport, and 2 A Rainproof models, Battery Doctor-® Chargers/Maintainers have electronic switching modes that safely charge and maintain lead acid or gel-cell 12 V batteries for peak operating conditions. Units include reverse polarity and short circuit protection as well as 2 charging-current settings and 3-color LED charge indicator.
Read More »
Chargers offer battery detection, overvoltage protection.
Respectively offered in 3 x 3 mm, 14-pin TDFN and 12-pin TQFN packages, MAX8844 and MAX8845 are 28 V, dual-/single-input, linear Li+ battery chargers with battery detection and overvoltage-protected outputs. Ability to provide resistor-adjustable fast-charge and top-off current thresholds promotes flexibility, which is further extended by auto-booting assistant circuit. While MAX8844 has 2...
Read More »
Solar Battery Charger provides peak power tracking.
Housed in 3 x 3 mm package, Model LT3652 features input voltage regulation loop, which controls charge current to hold input voltage at programmed level. When unit is connected to solar panel, input regulation loop maintains panel at peak output power. Accepting inputs from 4.95-32 V with 40 V absolute max rating, Model LT3652 features programmable charge current up to 2 A. Unit can charge 1-3...
Read More »
Bulk Briner 101: What You Need to Know When Considering a Bulk Briner
If you're thinking about switching from packaged to bulk salt, check out this white paper and see if a bulk briner is right for your application.
Read More »
Portable Battery Charger is designed for netbooks.
Weighing 265 g and measuring 150 x 83 x 14 mm, minigorilla charges netbooks across spectrum of 8.4, 9.5, 10.5, 12 and 19 V. Unit can also charge mobile phones, iPods, MP3 players and hand-held games consoles via 5 V USB socket and is capable of charging smaller devices and netbooks simultaneously. Lithium Polymer rechargeable battery has energy capacity of 9,000 mAh. There are 20 interchangeable...
Read More »
USB Adapter complies with ENERGY STAR® EPS Version 2.0.
Utilizing less than 0.03 W of power at no load, 2.75 W PSM03A-050Q features ENERGY STAR Level V efficiency markings and operates at minimum of 63.7% average efficiency. It measures 2.29 x 1.69 x 0.83 in., offers 5 Vdc output, has USB A output connector built into case, weighs 3 oz, and is rated for operation from -10 to +45-
Read More »Electrochem Introduces New Line of Custom Battery Charging Solutions
December 15, 2008 - Electrochem, a leader in battery and wireless sensing technologies for critical industrial markets, announced today its new line of custom charging solutions to accompany its offering of rechargeable battery packs. Electrochem's charging capabilities ranges from simple single bay chargers to complex multi-bay chargers incorporating smart electronics and battery management....
Read More »
Lithium Ion Battery Charger features LED status indicator.
Featuring 3 step charge control with current detection as charge termination, DC-DC input lithium ion battery charger can charge 3-8 cell battery packs and is protected against reverse polarity and short circuit. All charger ratings are based on nominal input of 10-30 Vdc, while output current ranges from 1.0-3.0 A. Switch mode charger has universal input voltage and protects batteries from...
Read More »
Monolithic Battery Chargers deliver up to 2 A.
Designed for single-cell Li-Ion/Polymer batteries, Models LT3650-4.1 and LT3650-4.2 operate from 4.75-32 V and have 40 V absolute maximum rating. Model LT3650-4.1 offers 4.1 V battery float voltage, while Model LT3650-4.2 features 4.2 V final charge voltage. Once charging is terminated, devices automatically enter low current standby mode that reduces input supply current to 85 -µA. Housed in...
Read More »
Battery Charger Controllers require no blocking diode.
Supporting multiple battery chemistries, Model LTC4012 offers adjustable battery termination voltage, while Models LTC4012-1 and LTC4012-2 utilize programmable internal resistor divider to charge from 1-4 series Lithium cells at multiples of 4.1 and 4.2 V, respectively. PWM units operate at input voltages from 5-28 V with output voltage of 2-28 V and programmable charge current to 4 A....
Read More »
TPA Motion Introduces New Curved Linear Rail Guides: the CR40 Series
For the ultimate in precision open and closed loop guided motion systems, TPA Motion is the leader in curved rail, liner guides. We specialize in engineering excellence, with products that exhibit an elevated level of precision, delivering robust performance, even under the most challenging conditions. See our video to learn more.
Read More »
