New Portable Battery Charger Compatible with 12 V Lead-acid and Lithium Vehicle Batteries
Safely gives a flat vehicle battery the power it needs to get going within 15 minutes. Features internal battery that takes less than an hour to fully charge through the fast USB-C input. Suitable for use on cars, motorcycles, leisure vehicles, vans and boats.
Read More »
New Charging Cradles Feature Temperature Detection and Charging Timer
Enable users to charge up to five tablets simultaneously in fast charging mode. Supports 15 W fast charging via 12 V/10 A AC/DC charging adaptor. Each battery slot has a charging current of 900mAh and LED indicator lights.
Read More »
Latest Power Supply/Chargers are Available in Myriad Configurations
Delivers 12VDC and 24VDC simultaneously from any 802.3bt PoE source up to 90W. Equipped with LiFePO4 battery and are UL Listed for Access Control. Ideal for end users, architects, and security consultants demand for mission critical access control applications.
Read More »
New Electric Vehicle Charger with Input Range of 90 to 264 VAC
EVC3400 series has input frequency range of 47 to 63Hz. with efficiencies up to 93%. Operating temperature has a range of -40 to +60ºC with a storage range of -40 to +85⁰C. Ideal for applications like material handling, motorcycles, scooters, motorcycles and e-carts.
Read More »
5 Key Questions to Ask Before Choosing a Custom Welding Company
This white paper provides an in-depth overview into choosing a custom welding company by highlighting five questions you should ask a potential welding partner to determine whether they are right for your custom welding project.
Read More »
New Inverter Battery Charger is IP6K9K Rated and Meets IEC 61851-21-1 Standard
Converts 3-phase AC voltage to DC voltage for hybrid or full electric vehicles. Include active HVDC interlock monitoring, with overtemperature, output overvoltage and overcurrent protections. Output voltage covers a wide variety of HV batteries in the range from 240 Vdc to 800 Vdc with constant output current of 60 A.
Read More »
New Mobile Device Charging Station Uses USB 3.1 Power Delivery Schemes
Available with six lockers with a SmartLock key system for security and requires a 110 V socket within three feet of the unit to install. 19" color touchscreen LCD at the top of the unit provides a multi-language interface that can feature advertising or other promotional or instructional videos. 16 robust charging cables are provided in each lockbox to ensure universal compatibility, including...
Read More »
New FREEDOM XC 230V Inverter/Charger is Compatible with Bluetooth Remote Panel
Features power share that utilizes less shore power when charging batteries, reducing the likelihood of tripping shore power breakers. Offers extended surge rating that makes it ideal for starting difficult loads including the fridge or microwave. Programmed to charge virtually any lithium ion chemistry and is designed to charge dead batteries drained to extremely low voltage.
Read More »
New UFC200 Ultra Fast Electric Vehicle Charger is Ideal for Charging Point Operators and Fleet Charging Requirements
Enables 100km driving range with 8 minutes of charging and serve EVs, e-trucks and e-buses in a broad range of applications. Offers modular power system design, remote accessibility for improved uptime service, and backend compatibility. Features non-liquid cooled 400A connector system that can supply extra power when the EV's battery system is at low charge without oversizing the system.
Read More »
New Power Supply/Charger Delivers 12 and 24 VDC Over 8 or 16 Outputs
Provides savings by leveraging low-voltage installation methods, eliminating the need for an electrician and dedicated conduit and wire runs. Tango8A includes 8-trigger inputs and 8-fuse or PTC protected access control outputs. Tango8P includes 8-fuse or PTC protected power outputs.
Read More »
New HyperJuice 100W 4-Port Charger Comes with GaNFast Power IC Technology
Uses power-sharing technology to deliver optimal charging to multiple devices from watches and air-pod chargers. Capable of world-wide AC voltage input and is supplied with snap-fit AC adapters. Measures 85.3 x 60.8 x 28.9 mm. and can deliver the maximum, with the two USB-A sockets providing up to 18W each for lower power, quick-charge or legacy systems.
Read More »
560 and 572 Series IP67 Waterproof Inline Plug and Socket Connectors with Shock and Vibration Resistance
EDAC's new line of IP67 waterproof plug and socket connectors represent the cutting edge of waterproof connection technology. Part of the 560 and 572 series of connectors, they utilize innovative design concepts to deliver a level of performance and value that is unmatched in the industry. See our video to learn more.
Read More »
