New: Buy Now on Thomas and Pay Over Time with Credit Key   Learn More

Ball Valves

Sanitary Ball Valves allow restriction-free flow.
Ball Valves

Sanitary Ball Valves allow restriction-free flow.

Sanitary Full-Port Ball Valves are constructed with rigid, corrosion-resistant, Type 316 stainless steel for tank outlets, 2-way in-line, and 3-way divert valves. Full nominal diameter ports provide slipstream flow from inlet to outlet ports, with no restrictions. Totally encapsulating seal design provides failure-free performance. Valves range from 1-½-4 in. and feature standard temperature of...

Read More »
Ball Valve suits water and light chemical applications.
Ball Valves

Ball Valve suits water and light chemical applications.

Quarter-Bloc PVC Ball Valve, certified to NSF-61, features all-thermoplastic construction, full orifice opening equivalent to ID of corresponding piping, and safe blocking design that allows downstream pipe removal. Offered -½-2 in. sizes, valve includes stem equipped with double O-ring sealing arrangement and handle that doubles as built-in spanner wrench. Interference fit between stem and...

Read More »
Flanged Ball Valves have electric or pneumatic actuator.
Ball Valves

Flanged Ball Valves have electric or pneumatic actuator.

Provided in 1/2-4 in. sizes, Series BV2 automated valve package offers ANSI 150 lb flanged ends to facilitate installation as well as blowout-proof stem, reinforced Teflon-® seats and seals, and 316SS ball. Actuators are direct-mounted, creating compact assembly for tight spaces, while double O-ring stem seals ensure leak-free operation. Weatherproof electric actuated models are powered by 115...

Read More »
Ball Valves

Compact Valve is suited for potable water applications.

NSF 61-certified H2O Type 374 Valve is manufactured with PVC body and PTFE/polyethylene blended ballseat for corrosion resistance. It is offered in 3/8-4 in. sizes with 3.58 in. lay length. True union valve incorporates safeblock ball seat and blowout-proof stem with double stem seals. Rated for 225 psi with socket ends and 150 psi with threaded ends, pump has 10,000+ cycle life and meets 12454-B...

Read More »
Ball Valves

Forged Ball Valve has high-purity design.

CleanFLOW model SB7F is equipped with self-aligning interlocking ends and fine adjust handle to ensure exact alignment of entire flow path. A-182 forged material has controlled delta ferrite content of less than 1% to minimum of less than 0.5%. With ISO-5211 center section, ball valve can be automated with pneumatic or electric actuators that may be fitted with 2-wire controls, limit switches,...

Read More »
Ball Valves

Multi-Port Ball Valves have no-leak pyramidal stem seal.

Constructed of 316 stainless steel, TRIAC Series 33, 43, and 53 are suited for mixing, diverting, and multi-directional flow control. Design permits in-line maintenance and features 5-seat, full-port construction to provide equal seat loading and positive sealing at any port. Balls offer L-, T-, I-, TT-Double T-, and LL-Double L-Port configurations. Valves come in 3-, 4-, and 5-way models in...

Read More »
Ball Valves

Ball Valve minimizes pressure loss.

Type 546 Ball Valve features optional characterized control ball design, which creates gradual change in flow rather than sudden change typical with traditional ball valve styles. Available in -½-2 in. sizes, valve offers control angles from 0-90-

Read More »
Multi-Port Ball Valve simplifies piping connections.
Ball Valves

Multi-Port Ball Valve simplifies piping connections.

Plastic, lateral, 3-way ball valves replace conventional valve/tee connection combinations as well as zero dead-leg valves in piping system layouts. Available in sizes from -½-6 in., products can be made of PVC or CPVC with choice of FPM or EPDM seals. Integral ball permits flow to be diverted from center port to left or right ports without shutoff position. Valves feature one-piece molded body...

Read More »
Ball Valves come in 1/2 and 3/4 in. sizes.
Ball Valves

Ball Valves come in 1/2 and 3/4 in. sizes.

In-line, 2- and 3-Way Divert, Fluid Flow Ball Valves feature mica-filled Teflon-® seals, tri-clamp connections, and full-port design. Made of corrosion-resistant T-316 stainless steel, 2-piece design allows for breakdown by hand without use of tools. ID/OD polish is standard, and valves can be used in CIP systems. Comprised of 13 parts, valves are available with actuators, switches, and...

Read More »
Ball Valves

Ball Valves feature electric actuator.

Series 130 consists of Type 131 in polypropylene, Type 132 in PVDF, and Type 133 in PVC and CPVC, all available in sizes 3/8-2 in. Designed for service life of 250,000 cycles, EA 21 actuator is equipped with integrated emergency manual override and automatic adjustment of voltage and frequency for on/off or process control applications. Units include ISO-Namur interface and IP67-rated housing...

Read More »

All Topics