Backplanes

Backplanes

IP PBX System is based on Intel reference design.

Integrating Intel® Architecture processors for data processing and Intel® IXP465 network processors with 128 MB DDR RAM, WIN CAP Converged Application Platform provides single point of network connectivity. It supports Ethernet switch, router/firewall/VPN, QoS device, WAN access device, Wi-Fi AP, analog telephone adaptor, and application server. System offers up to 1 GB DDR2 RAM,...

Read More »
MicroTCA Backplane has 14-slot design.
Backplanes

MicroTCA Backplane has 14-slot design.

Featuring Single Star topology and 16-layer controlled-impedance stripline design, MicroTCA Backplane has modular architecture that supports redundant pods of AdvancedMC (AMC) modules. It provides 12 AMC slots, one power module slot, and one MicroTCA Controller Hub (MCH) slot in single width, full size format. Product allows single or redundant virtual carriers to provide power management,...

Read More »
ATCA Full Mesh Backplane offers complete pluggability.
Electrical Connectors

ATCA Full Mesh Backplane offers complete pluggability.

Compliant to PICMG 3.0 specification, 14-slot ATCA features 18-layer stripline design with pluggable fan tray, shelf manager, and power entry connectors. Dual Star or Mesh configurations can be utilized within same backplane, and unit has theoretical performance of 1 TB/sec. Able to accommodate 8U x 280 mm boards on 1.2 mm pitch, product features Gigabyte/Terabyte per second bandwidth across each...

Read More »
Backplane meets cPSB PICMG 2.16 specifications.
Backplanes

Backplane meets cPSB PICMG 2.16 specifications.

Low-Profile PICMG 2.16 Compact Packet Switching Backplane is 9U long when horizontally mounted in chassis. Pluggable 47-pin power connectors are in extra 3U of length, allowing hot swapping of power supplies into same monolithic backplane. Backplane is available in Star, one fabric slot, and Dual Star, two fabric slot, versions.

Read More »
Hybrid Backplanes suit Compact PCIexpress systems.
Backplanes

Hybrid Backplanes suit Compact PCIexpress systems.

Standardized 8-slot 3U CompactPCI Express backplane with Positronic connector provides 6 slots for add-on cardexpansion; PXIexpress version is also available. Two slots provide legacy support for use by existing 32-bit CompactPCI boards, while other 4 are hybrid slots that support CompactPCIexpress technology. Offered in customized versions for OEMs, boards enable accelerated development of...

Read More »
Backplanes

Backplane implements VXS processor mesh.

Developed to enable switch/processor mesh technology for applications that require multiple boards, 12-slot Hybrid Backplane implements 2 VME64x slots, 3 VME64x/VXS payload slots, and 6 VXS switch slots. Each switch slot implements 20 x 4 links for total of 25 GB/s per switch slot. System architecture supports up to 7.5 GB/s of throughput between I/O front end and processing mesh, and total of...

Read More »
Backplanes

Sanmina-SCI to Showcase Leading-Edge PCB and Backplane Technology at DesignCon 2006

SAN JOSE, Calif., Jan. 31 / -- Sanmina-SCI Corporation (NASDAQ:SANM), a leading global electronics manufacturing services (EMS) company, today announced that it will exhibit new printed circuit board (PCB) and backplane technology developments at DesignCon 2006, to be held February 6 through February 9, at the Santa Clara Convention Center in Silicon Valley. Sanmina-SCI will be located in the PCB...

Read More »
Backplanes

Backplane utilizes CompactPCI Express architecture.

Based on PICMG specification, EXP0 four-slot CompactPCI Express backplane contains system slot, one Type 1 slot, and 2 Type 2 slots. Backplane, featuring 10-layer stripline design and user available backplane I/O of P3, P4, and P5 connectors. CompactPCI Express supports Intel PCI Express architecture in 6U-160 Eurocard form factor. It connects cards via serial point-to-point bus with read-only...

Read More »
Backplanes

Backplane provides 20 slots.

Featuring 2 hub slots and 18 payload slots, 7U Dual Star VXS VME Switched Serial Backplane is designed with low-dielectric Nelco PCB material and comes in 18-layer controlled-impedance stripline design. Unit is fully backwards-compatible to VME/VME64x. It utilizes 6.4 Gbps connector across P0 section of VME64X backplane, allowing use of switched fabric signals. Height of backplane allows room for...

Read More »
Backplanes

Backplane is available in 20-slot version.

Dual Star VXS backplane comes in 18-layer controlled-impedance stripline design with 2 hub slots and 18 payload slots. As VME switched serial backplane, 7U unit uses low-dielectric Nelco PCB material to help control impedance and minimize crosstalk. It is fully backwards-compatible to VME/VME64x and utilizes 6.4 Gbps high-speed connector across P0 section of VME64x backplane, allowing use of...

Read More »
Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions
Sponsored

Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions

Triad Magnetics is an established leader in power supply innovation, offering product lines that span a wide range of diverse industries and applications. Adding to their long list of successful product launches, Triad announces the release of the new cutting-edge JSU Series of power supplies. To learn about all of its advantages and advanced features, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers