JadeFX® Model 5983 Carrier Board supports ANSI/VITA-66.4 optical interface.
Electronic Boards

JadeFX® Model 5983 Carrier Board supports ANSI/VITA-66.4 optical interface.

JadeFX® Model 5983 3U VPX Carrier Board is suitable for connecting to IF, HF or RF ports of a communications or radar system. Unit comes with 9 GB of DDR4 SDRAM and optional GPS and 12 GB/sec VITA-66.4 optical backplane I/O. Unit’s optical interface enables up to 12 GB/sec backplane communication between boards. Product features x8 PCIe Gen 3 link that delivers 6.4 GB/s data transfers to...

Read More »
OEM Positioning and Heading Boards support fast RTK initialization times.
Circuit Board Assembly Services

OEM Positioning and Heading Boards support fast RTK initialization times.

Operated in single-frequency or full performance multi-frequency, multi-GNSS, Atlas-capable mode, Vector Eclipse H328 OEM Positioning and Heading Boards support fast RTK initialization times over long distances. Housed in 60 mm x 100 mm module with 24- and 16-pin headers, units offer fast accuracy heading of more than 0.17° at 0.5 m antenna separation. Designed with Serial, USB, CAN, Ethernet,...

Read More »
Circuit Board Assembly Services

Sanmina's Circuit Assembly Capabilities are suitable for military and aerospace applications.

Sanmina's Flex and Rigid Flex Circuit Assembly Capabilities combine laminates, mil-aero connectors and advanced circuit fabrication technologies. Using D38999, D-Sub Micro-D and blind mate connectors, Sanmina is able to provide data rates up to 10-15 gigabits/sec. Flex and Rigid Flex Circuit fabrication technology in defense and aerospace applications provide small factor and reduced weight...

Read More »
Medical Cable and Wire Harness Assembly Services meet ISO 13485 standards.
Assembly Services

Medical Cable and Wire Harness Assembly Services meet ISO 13485 standards.

Using automated wire processing equipment for wire from 30 Ga to KC mil, Aved Medical Cable & Wire Harness Assembly Services employ Cirris® 1100R+ testers which are combined to mobile carts with dedicated computers for storing all part numbers, customer information, serial number and lot identification details. This service includes building text fixtures and mating connectors for each assembly.

Read More »
A Vectrol Electronic Power Controller for Line Frequency Induction Furnaces
Maintenance and Repair Services

A Vectrol Electronic Power Controller for Line Frequency Induction Furnaces

Ajax TOCCO Magnethermic’s® (ATM) circuit board repair facility has developed the capability of repairing and testing Vectrol phase angle control assemblies. These control assemblies are critical to the operation of older line frequency induction melting furnaces and other applications. For repair and testing of Vectrol Assembly #4111001188 ask for System Reliability Services when calling...

Read More »
SMA to SMP Cable Assembly is suitable for high performance mil/aero.
Wire Cable and Fiber Rope Assemblies

SMA to SMP Cable Assembly is suitable for high performance mil/aero.

Including anti-torque feature, cable assemblies allow user to hold body with one wrench coupling nut. With SMA to SMP configuration, device is suitable for test and measurement applications. Operating up to 18 GHz, unit is ideal for high frequency and  high vibration applications. Incorporating passivated stainless steel SMA plugs on one end and compact, high performance on opposite end,...

Read More »
CB51 Boards for CableEye surface mount and TH connectors.
Electronic Boards

CB51 Boards for CableEye surface mount and TH connectors.

Suitable for all CableEye adapter boards, CB51 includes 4 sets of 60 solder pads of aligned and staggered pins at 1.25 mm and 1.5 mm pitch. Flexible for use in various configurations and combinations, device includes four preset locations for automatic detection and display of any-pin-count connector up to 60-pins. Rated to 700 Vdc or 500 Vac, unit comes with optional PinMap™software and is...

Read More »
Electrical Connectors

ETCO Innovates again by Customizing GBBA and FAE to Plug into PCB Boards

Bradenton, FL -- In order to solve a challenge for a manufacturer of smart power outlets, ETCO came up with a novel idea. Remove the ear sections on ETCO GBBA and FAE and replace them with pins that plug directly into a PCB board. They are then soldered in place. The ETCO GBBA plugs into the wall socket and consumers plug their devices into the FAE on the other side of the device. The power is...

Read More »
Logic Supply Introduces Industrial ARM Motherboards and ARM Mini PC
Circuit Board Assembly Services

Logic Supply Introduces Industrial ARM Motherboards and ARM Mini PC

New SBCs and tiny Box PC from Embux provide IPC users with a more reliable, industrial ARM solution. SOUTH BURLINGTON, VT Fanless, small form factor computer specialist Logic Supply (www.logicsupply.com) has unveiled a trio of new products from ARM hardware developer Embux. The two Single Board Computers (the ICM-2010 and the ICM-3011) and tiny Box PC (ICS-2010) are designed for use by industrial...

Read More »
Circuit Board Assembly Services

Position and Heading OEM Boards integrate L-band.

Powered by Athena™ GNSS engine, Eclipse™ P326 and P327 are based on platform that integrates L-band and receives Atlas® GNSS corrections on single small board. Units support 394 channels and offer centimeter-level accuracy in either single-frequency or multi-frequency, multi-GNSS, Atlas-capable mode. Devices enable simultaneous tracking of all satellite signals including GPS, GLONASS,...

Read More »
Precision Machined Parts for High Tech Applications
Sponsored

Precision Machined Parts for High Tech Applications

For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.

Read More »

All Topics