Arrays

Ball Grid Arrays meet MIL-STD specs.
Arrays

Ball Grid Arrays meet MIL-STD specs.

Micro-ACE BGA package has the smallest footprint of any 1553 integrated terminal. They are available in 3 configurations: Remote terminal Model #BU-61740B3-202 with 4 K x 16 RAM, and Bus controller/remote terminal/monitor Models #BU-61840B3-202 with 4 K x 16 RAM and #BU-61860B3-202 with 64 K x 17 RAM. All have choice of RT buffering modes, selective message monitor, autonomous built-in protocol...

Read More »
Signal Receivers

Gate Arrays facilitate custom algorithm development.

GateFlow(TM) Field Programmable Gate Arrays offload computational-intensive DSP functions from processor. They implement data formatting, timing, and specialized glue logic needed to connect real-time peripherals to programmable processors. Installed Cores offer streamlined Fast Fourier Transform (FFT) implemented on FPGA-based, dual-channel receiver Model 6235, and deliver spurious-free dynamic...

Read More »
MOSFET BGAs work with battery packs.
Arrays

MOSFET BGAs work with battery packs.

FDZ2551N and FDZ2553N dual N-channel and FDZ2552P and FDZ2554P P-channel 20 V MOSFET ball grid arrays have physical and electrical characteristics that are suitable for Li-Ion battery pack protection applications. Each BGA is housed in 4 x 2.5 mm surface mount package, and has common drain connection and 0.8 mm mounted height. RDS(On) is 28 mohm and 14 mohm for N and P channel devices,...

Read More »
Linear Sensor Arrays operate at 5 MHz clock.
Image Scanners

Linear Sensor Arrays operate at 5 MHz clock.

Model TSL2014, 896 x l Linear Sensor Array measures 4.4 in. in length and is designed for scanning A6 format-size documents. It comes in 10-pin Glass Epoxy Substrate package with Cover Glass. Model TSL210, 640 x 1 Linear Sensor Array measures 3.15 in. in length, and comes in 18-pin Glass Epoxy Substrate package with Cover Glass. TSL210 can be configured in serial mode. TSL2014 can be configured...

Read More »
MOSFET BGAs provide load switching in portable applications.
Arrays

MOSFET BGAs provide load switching in portable applications.

P-Channel MOSFET Ball Grid Arrays do not require external charge pump circuitry and are 2.5 V/4.5 V gate-driven specified, enabling them to be driven directly from integrated circuits in battery power applications. Footprint dimensions range from 2.0 x 2.0 mm to 3.5 x 4.0 mm. Units offer designers Footprint Figure-of-Merit (FFOM) significantly lower than devices housed in SC-70, SO-8, TSSOP-8,...

Read More »
Arrays

Cantilever Sensor works in air or fluids.

Scentris(TM) sensor array, for commercial applications, uses cantilever surface coated with material that has selective affinity for given target substance. When target substance encounters cantilever, it generates mechanical signal that bends or changes resonance frequency of cantilever. Single sensor can be coated to detect array of different chemical agents. It measures cantilever deflections...

Read More »
Arrays

Circuit Bridge Adapter allows testing and upgrade without redesign.

Adapter internally bridges BGA device's circuitry without need for board redesign or rework, and allows PCB to change function while keeping same layout. User can probe circuit during debugging. Board material is 0.062 in. thick FR-4 with 10 layers. Solder balls are 0.020 in. dia Sn/Pb 90/10, and operating temperature is 221°F. Adapter is available in various materials, platings, sizes and...

Read More »
Photodiode Arrays are designed for scanning applications.
Photodiodes

Photodiode Arrays are designed for scanning applications.

EPA-4400 Series consists of 8, 16, and 32 element photodiode scintillator arrays featuring high sensitivity of 400-1080 wavelength and uniform response of 0.30 A/W. Element size is 1.49 x 3.61 mm with element spacing of 1.587 mm. Arrays are suitable for X-ray and scanning applications such as spectroscopy, security systems, and baggage scanners.

Read More »

All Topics