LED Bollard Lights are IP65 rated.
Lights

LED Bollard Lights are IP65 rated.

Offered in 25w and 35w and Kelvin temperatures of 3000K, 4000K, and 5000K, MARI LED Bollard Lights emit light in 360-degree circle. Unit’s heads and louvers are made of die-cast aluminum and bases are marine-grade coated. Products are rated at 50,000 hours and deliver 1,500 lumens at 25w and 2,500 lumens at 35w. MARI meets AAMA 2605 marine-grade standards.

Read More »
Dissipative Rubber Worksurface Mat meets ANSI/ESD S20.20 standards.
Mats

Dissipative Rubber Worksurface Mat meets ANSI/ESD S20.20 standards.

SCS R3 Series Dissipative Rubber Worksurface Mat is available in rolls and mat kits. Compatible with workstation monitors, unit is resistant to solvents, hot solder and soldering irons. Table mat is offered in 24 in. x 48 in. size whereas roll mat kit comes in 24 in. x 50 ft, 30 in. x 50 ft, 36 in. x 50 ft, 48 in. x 50 ft size. Both products come in light blue, gray and green colors. Worksurface...

Read More »
INFINA™ ACX AC LED Linear Strips offer 50,000 hours of operation.
Lights

INFINA™ ACX AC LED Linear Strips offer 50,000 hours of operation.

Offered in 9/16 in. wide x 5/16 in. high, INFINA™ ACX AC LED Linear Strips can be mounted in snap-in 3 ft channel or with mounting clips in dry, damp and wet locations. Units are made from thermoplastic polyurethane material and operated from 120 line voltage. Products come with run length of 100 ft and color choice of red and blue. LED Strips are equipped with thermoplastic jacket. INFINA™...

Read More »
Extremely Soft TIM Delivers Low Thermal Resistance
Pads

Extremely Soft TIM Delivers Low Thermal Resistance

Carteret, NJ - Wednesday, July 19, 2017 - Sarcon® PG25A is one of Fujipoly's softest and best performing thermal gap filler pads for applications that have delicate components and high compression rates. When it is sandwiched between components of varying shapes and sizes and a nearby heat sink or spreader, this compliant 2.5 W/m°K material exhibits a thermal resistance as low as...

Read More »
LED Round Wall Lights deliver up to 8,862 lumens.
Lights

LED Round Wall Lights deliver up to 8,862 lumens.

Available in open face and lattice designs, LED Round Wall Lights can be mounted on ceilings or walls. Constructed of acrylonitrile butadiene styrene or die-cast aluminum housings, unit comes in Kelvin temperature range of 4000K to 5000K. Providing 50,000 to 187,000 hours live, products come with optional surge protectors, battery backups, sensors and photocells. Offering power of 20w-70w and...

Read More »
SPEQ LED Fixtures are dimmed using TRIAC and ELV dimmers.
Lights

SPEQ LED Fixtures are dimmed using TRIAC and ELV dimmers.

Available in large (48 W), medium (26 W) and small (15 W) models delivering up to 3977, 2056 and 1310 lumens with CBCP of 46,856, 14,898 and 9393 respectively, SPEQ LED Track and Surface Mount Fixtures come with white, black and silver texture finishes. Offering 1, 2 and 3 circuit mounting options, units provide beam range from narrow spot to wide flood. Delivering efficacy up to 91 with CRI of...

Read More »
SpectraLoc™ LED absorbs wavelengths of light below 500 nm.
Lights

SpectraLoc™ LED absorbs wavelengths of light below 500 nm.

Converting harmful blue light under 500 nm to green and yellow light, SpectraLoc™ LED Blue Spectrum Suppression Highbay prevents photochemical degradation and photo-oxidation damage to milk, beer, pharmaceuticals, and semiconductors products. Consuming only 112-175 watts, unit can exceed 19,000 lumens, and generates less heat. Eliminating risk of glass breakage in food production areas, LED...

Read More »
ILM-660 Light Source features pistol grip with external trigger.
Lights

ILM-660 Light Source features pistol grip with external trigger.

Consisting of removable sapphire window and glass Petri dish for holding chips or powders, ILM-660 Light Source comes with two reflectance contact probes with 3mm and 10mm spot size. Attached to spectrometer/spectroradiometer using a quick release fiber mount connection, unit comes with straight and right angle diffusers and fiber mount FOV lenses.

Read More »
J-Box Downlight is equipped with integral junction box.
Lights

J-Box Downlight is equipped with integral junction box.

Available in 4 and 6 in. diameter and color temperatures of 2700K, 3000K and 4000K, J-Box Downlight comes with output range of 450 to 700 lumens. Housed in airtight and IC-rated package, unit can be secured using integral torsion springs. Offering lumen-maintenance life of 36,000 hours, product is suitable for residential and commercial space applications. Operated on 120 V source, downlight...

Read More »
NRFit™ Connectors and Caps meet ISO 80369-6 standard.
Caps

NRFit™ Connectors and Caps meet ISO 80369-6 standard.

Designed for neuraxial applications such as spinal and epidural procedures, NRFit™ Connectors and Caps are BPA and latex-free medical-grade acrylic resin. Connectors are available to fit 0.083 in. or 0.122 in. outer diameter tubing whereas caps come with vented and non-vented designs. Suitable for small-bore connecting applications, connectors feature ergonomic wings on the female connectors...

Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Sponsored

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.

Read More »

All Topics