Techniq T14 Identification and Ramp Light Delivers 500 Lumens of White Light
Lights

Techniq T14 Identification and Ramp Light Delivers 500 Lumens of White Light

The T14 80 in. Identification and Ramp Light is hermetically sealed to IP68 standards and offered with high impact-resistant polycarbonate lens. The product comes with advanced lens design that floods the area in a side-to-side 140° arc and down 90° to the ground. The unit features 15.5 in. long, 1.25 in. high and 0.5 in. thick dimensions and can be surface mounted with two screws. The...

Read More »
Platinum Tools® Announces New Unloaded Patch Panels at ISE 2019; Now Available
Miscellaneous Panels

Platinum Tools® Announces New Unloaded Patch Panels at ISE 2019; Now Available

Available in Shielded and Unshielded, and 24-Port and 48-Port Configurations NEWBURY PARK, Calif., USA, Dec. 27, 2018 - Platinum Tools® (www.platinumtools.com), the leader in solutions for the preparation, installation, hand termination and testing of wire and cable, is proud to announce the launch of the new shielded and unshielded Unloaded Patch Panel line. The new 24- and 48-port line is now...

Read More »
SPX Cooling Technologies Debuts Latest Cooling Tower Innovations and Presents School of Cool Seminars at AHR Expo® 2019
Towers

SPX Cooling Technologies Debuts Latest Cooling Tower Innovations and Presents School of Cool Seminars at AHR Expo® 2019

Visit Booth B1415 to see the new Marley® DT fluid cooler, Marley MD Everest® and NC Everest cooling towers, Recold® V Tech™ adiabatic cooling system, components and controls Overland Park, Kan. – SPX Cooling Technologies, Inc., a full-line, full-service industry leader in the design and manufacture of evaporative cooling towers and air-cooled heat exchangers, showcases its latest cooling...

Read More »
Latest Farmhouse Products from Pioneer Millworks Come in Various Scandinavian-Inspired Natural Tones
Woodwork

Latest Farmhouse Products from Pioneer Millworks Come in Various Scandinavian-Inspired Natural Tones

The Latest Farmhouse Products are available in various hardwood species in clean grade and casual grades. The products are offered with variety of wood options such as ash, hickory, walnut, maple and oak. They come with face widths up to 9 in. and feature less tonal variation and fewer knots. The Scandinavian styles consist of Linen, Pure, Straw, Naked, White Wash and Expresso.

Read More »
Nora Lighting Introduces FLIN LED Series Fixtures with Universal Coiled Flippers
Lights

Nora Lighting Introduces FLIN LED Series Fixtures with Universal Coiled Flippers

The FLIN LED Series Recessed Lighting Fixtures are available in 4, 6 and 8 in. apertures with round or square baffled trims. The units are cULus listed for wet locations and complies with 2016 Title 24-part 6 High Efficacy LED light source standards. The fixture comes in 0.65 in. height and features dimmable integral Triac/ELV driver and a 22 in. quick connect. It is offered with regressed baffle...

Read More »
Patcraft Offers Splitwood That is Suitable for High Demand Environments
Floors

Patcraft Offers Splitwood That is Suitable for High Demand Environments

The Splitwood™ Resilient Collection is offered in 9 x 60 in. plank sizes and embraces innate beauty of worn wood, turning natural imperfections. The product’s graining and intricate detail is created by an emboss that allows texture to align with pattering of the wood. The planks (5 mm construction) make them suitable for installation alongside carpet without need for transition. The...

Read More »
New LED Linear High Bay Lights are ETL and DLC Certified
Lights

New LED Linear High Bay Lights are ETL and DLC Certified

The LED Linear High Bay Light is offered in 16,000 – 64,000 lumen output versions with integrated occupancy and daylight sensors. They are available 1 x 2 ft, 2 x 2 ft, 1 x 4 ft, 2 x 4 ft. sizes and have the ability to network wirelessly to smartphone apps or lighting management software systems.

Read More »
New Meller Sapphire Optical Domes Provide Mohs 9 Hardness
Domes

New Meller Sapphire Optical Domes Provide Mohs 9 Hardness

The Meller Sapphire Optical Domes are custom fabricated in sizes up to 6 in. O.D. and offers 160 degree maximum included angles. The domes have a surface accuracy to less than 1 fringe at 633 nm and finishes to 20-10 scratch-dig per MIL-PRF-13830 standard. The units can withstand 10,000 psi and 1,000°C for shielding optics and electronics in missile guidance systems.

Read More »
Precision Machining Solutions with Over 25 Years of Experience
Sponsored

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers