LED Light Bar features aerodynamic, low-profile design.
Lights

LED Light Bar features aerodynamic, low-profile design.

Featuring thermally conductive body, HELLA LED Light Bar 350 incorporates 12 automotive-grade LEDs that produce 145,000 candela power at 25 W. Housing is injection molded from ceramic-based polymer that is lightweight and resistant to corrosion. Weighing 1.5 lb, hermetically sealed and submersible light bar incorporates Multivolt™ circuit for optimum brightness at input voltages from 9–33...

Read More »
Lights

Power Analog Controllers for LED Lighting have digital interface.

Respectively availableÂ- in 4 x 4 and 5 x 5 QFN packages, MCP19116 and MCP19117 increase accuracy for LED lighting and let users control LED light output levels without sacrificing color or light quality in long-life applications. These intelligent PWM controllers with integrated PIC® MCU core combine power and performance of analog-based controller with flexibility of digital...

Read More »
Lay-In Panel Light Fixture operates in hazardous locations.
Lights

Lay-In Panel Light Fixture operates in hazardous locations.

Along with rear access panel for facilitated service, HAL-RA-48-6L-T5HO-480V features 20 gauge steel construction withÂ- white baked enamel finish and 3/16 in. clear tempered glass lens. Latter protects six 54 W T5HO lamps, which collectively produce 30,000 lm. Suited for hazardous locations where mounting space is limited, this Class 1 Division 2,...

Read More »
LED Fixed-Pattern Projector enables daylight ambience operation.
Lights

LED Fixed-Pattern Projector enables daylight ambience operation.

Used for structured lighting in 3D machine vision, Pattern Blazer™ produces bright patterns atÂ- extended working distances to enable use of 3D imaging in well-lit areas. Any LED wavelength can be equipped; single- or multi-wavelength configurations are made possible via use of chip-on-board LED die arrays. Operating up to 150 W, projector can produce 1.5 Mlux as at 10 m working...

Read More »
Angle Bracket Cover Caps enhance profile protection, appearance.
Caps

Angle Bracket Cover Caps enhance profile protection, appearance.

Available for GN 960 and 961 metric size Angle Brackets for aluminum T-slot profile systems, metric size GN 963 Cover Caps feature RoHS-compliant, matte black Polyamide PA plasticÂ- construction. Cover caps, which come in 3 sizes and snap into place via 4 lugs after angle brackets are assembled, give angle bracket finished appearance and protect against dirt. Despite repeated...

Read More »
LED Luminaires operate in hazardous locations.
Lights

LED Luminaires operate in hazardous locations.

Performing at 105 lm/W, HLR Series is available in output range of 8,000–17,000 lm to replace HID fixtures up to 400 W. Luminaires deliver crisp, bright white light with CRI of 5,000 K. ConstructedÂ- with die cast aluminum housing and full module heat sink, fixtures are certified for use in indoor and outdoor hazardous areas, including those classified as Class I, Division 2 and Class II,...

Read More »
Insulating Broadband EM Window protects satellite systems.
Architectural Windows

Insulating Broadband EM Window protects satellite systems.

Flexible and conformable film, Sunshade, acts as thermally insulating, broadband electromagnetic window that protects satellites from solar radiation. Available in large format for coverage ofÂ- up to 2.5 x 10 ft areas, thin film solution controls temperatures passively, can transmit high-speed data (RF transparent), and allows static charge to bleed off. Construction features with...

Read More »
Flexible Welding Enclosures®, Ultra Low Cost Welding Chambers
Welding Chambers

Flexible Welding Enclosures®, Ultra Low Cost Welding Chambers

When welding titanium, zirconium and some stainless steel joints it is important that the welding zone is purged of oxygen to a level as low as 10 parts per million (ppm).Â-  A flexible chamber is available from Huntingdon Fusion Techniques HFT® for a fraction of the cost of a rigid welding chamber. Flexible Welding Enclosures® provide a solution where a rigid chamber may not be...

Read More »
DLC Qualified 24 W LED Tube replaces 54 W fluorescent T5 HO tube.
Lights

DLC Qualified 24 W LED Tube replaces 54 W fluorescent T5 HO tube.

Compatible with electronic ballasts, plug-and-play T5 24W HO DIR directly replaces fluorescent T5 HO 54 W tube without requiring any rewiring during installation. Micro-designed driver and compact light engine create light emitting area of 270°. To deliver uniform and seamless light, integrated driver is stored discreetly within tube end cap. Dimmable lamp, available in 3000K, 3500K,...

Read More »
UV Spot and Flood Light Curing Systems enhance 3D printing.
Lights

UV Spot and Flood Light Curing Systems enhance 3D printing.

UV light-curing flood-lamp systems, designed for area curing or for curing multiple assemblies at once, use lamp rated up to 225 mW/cmÂ-² for accelerated curing over 5 x 5 in. area. For rework or repair, BlueWave® 200, 3.0 spot-lamp system employs high-intensity lamp emitting energy in UVA and visible (300–450 nm) spectrum. Suited for manual or automated processes,...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers