Arc / Resistance Welders

Welder/Generator/Air Compressor includes battery charger.
Arc / Resistance Welders

Welder/Generator/Air Compressor includes battery charger.

Available with internal 12/24 V battery charger and jump starter, Trailblazer® 302 Air Pak(TM) welds at up to 350 A, and provides 13,000 W of Accu-Rated(TM) generator power, 26 cfm compressed air, and 450 A of battery jumping power. Charger delivers power until it senses load from starter to eliminate battery failure. Driven by 30 hp Kohler gas engine, 59½ x 20 x 34¼ in. welder provides...

Read More »
Single-Phase MIG/FCAW Welder delivers 30-250 A output.
Arc / Resistance Welders

Single-Phase MIG/FCAW Welder delivers 30-250 A output.

Suited for mild steel material ranging from 24 Ga to Â-½ in., DC/CV IronMan(TM) 230 features 12 voltage taps for precise control of welding arc. It has cast aluminum 2-roll wire drive system and patented hub design that requires no tools to adjust for variety of spool sizes (1, 2, 10, and 45 lb). Other features include 2 cable hangers mounted on unit's side for holding power cord, MIG gun...

Read More »
Engine-Driven Welder/Generator performs in extreme conditions.
Arc / Resistance Welders

Engine-Driven Welder/Generator performs in extreme conditions.

Offering 500 A for DC stick and DC TIG welding as well as up to 5/16 in. carbon arc gouging, Big Red(TM) 500 is built using reactor technology and 3-cylinder Deutz® D2011L3i oil/air-cooled industrial diesel engine. This 32 hp, 1,800 rpm engine is EPA Tier 4i-rated and includes protection for low oil pressure and high temperatures. Rated for operation up to 131°F, product is supplied...

Read More »
Portable, Engine-Driven Welder incorporates AC generator.
Arc / Resistance Welders

Portable, Engine-Driven Welder incorporates AC generator.

Driven by 10 hp gasoline engine, Outback® 145 suits jobsite and outdoor welding applications where portable DC stick welding and AC generator power are needed. It delivers 145 A of smooth DC output welding for use with up to 1/8 in. stick electrodes on steel, stainless steel, cast iron, and hardfacing projects. Single, full-range, calibrated welding output dial facilitates setting of...

Read More »
Cross Wire Welder is fully automated.
Arc / Resistance Welders

Cross Wire Welder is fully automated.

Automatic cross wire welder compliments AFM 2Dx machine, which produces wire frames that get butt-welded and then transferred into frame hopper of T-Welder system. Separate wire feeding module straightens, feeds, and cuts individual wire pieces, which are automatically cross welded into frames positioned by frame carriage. All dimensions are programmable, and production is controlled by...

Read More »
Enclosed-Case Welder can also be used as generator.
Arc / Resistance Welders

Enclosed-Case Welder can also be used as generator.

Driven by 23 hp Kohler® gasoline engine, Ranger® 225 delivers smooth DC welding output and 10,500 W peak (9,000 W continuous) AC generator power. Fully enclosed case protects engine in rugged environments while also lowering noise emission. Welding output, selectable as DC+ for deep penetrating arc or DC- for less penetration, is designed for range of stick electrodes. Various basic...

Read More »
Portable AC Welder/Generator provides up to 140 A output.
Arc / Resistance Welders

Portable AC Welder/Generator provides up to 140 A output.

Designed exclusively for AC stick welding, Bulldog(TM) 140 delivers up to 16.7 A continuous power from 240 Vac receptacle and up to 33.3 A continuous power from 120 Vac duplex receptacle. Unit provides arc welding on steel, stainless steel, cast iron, and hardfacing with electrodes ranging from 3/32-1/8 in. Equipped with Â-¼ in. diameter tube frame, welder features Subaru® 10 hp Model...

Read More »
MIG/Flux-Cored Welder offers heavy-duty wire drive.
Arc / Resistance Welders

MIG/Flux-Cored Welder offers heavy-duty wire drive.

Intended for MIG and flux-cored welding on mild steel, stainless steel, and aluminum, 30-250 A-rated POWER MIG® 216 wire feeder/welder arrives spool gun ready to facilitate switch to aluminum wire welding. Diamond Core Technology(TM) provides forgiving arc, out-of-position control, and minimal spatter. MAXTRAC(TM) cast aluminum wire drive features dual-driven rolls, regulated wire feed...

Read More »
Arc / Resistance Welders

Swagelok Releases New Functionality, Accessories for the M200 Power Supply

Solon, Ohio (August 31, 2009)-Combining form and function, Swagelok Company released new software for its Swagelok® welding system M200 power supply to deliver increased performance in an updated graphical interface. The M200 offers ease of use, portability, and 200 amp capability for orbital welding at a weight of less than 50 lbs (23 kg). A high-resolution, 12.1 in. (30.7 cm) color...

Read More »
Spool Gun optimizes MIG aluminum welding.
Arc / Resistance Welders

Spool Gun optimizes MIG aluminum welding.

Suited for light- to medium-duty aluminum fabrication and repair work, Spoolmate(TM) 200 features handle-based wire feed speed adjustment and 20 ft power cable. Unit offers curved and extended barrel options as well as internal shielding gas line, optimizing ability to access tight joint configurations. Rated to 160 A at 60% duty cycle, Spoolmate 200 accepts .030 and .035 in. wire and plugs...

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.

Read More »

All Topics