New mmWave Antenna Modules Can be Paired with Snapdragon X50 5G Modem
Qualcomm’s mmWave Antenna Modules consist of 5G NR millimeter wave (QTM052) and sub-6 GHz RF (QPM56xx) models. The units are designed for smartphones and mobile devices. QTM052 supports up to 800 MHz of bandwidth in the 26.5-29.5 GHz, 27.5-28.35 GHz and 37-40 GHz mmWave bands. QPM56xx family consists of QPM5650, QPM5651, QDM5650, and QDM5652 models. The sub-6 GHz RF modules provide integrated...
Read More »
New MON Series LTE Antenna Offers Higher Efficiency at Lower Frequency Bands
Linx Technologies introduces the cost effective MON series LTE antenna with tilt and swivel joint design for optimum performance in the product. The 4 cm tall external antenna can also fold against the enclosure for shipping or transport. This easy to implement antenna features durable and versatile design to reduce any damage from the impact forces.
Read More »
New HDP and VDP Series Antennas Come with Horizontal or Vertical Cable Egress
Linx’s HDP and VDP Industrial Antennas are designed for applications such as Dual-Band WiFi, NB-IoT, CAT-M1, 868 and 916 MHz. Units can be located remotely from the radio using two meter low loss cable. The antennas are compliant to IP67 and UV standards and can be mounted to non-conductive surfaces using an integrated PSA adhesive patch.
Read More »
New AT-402BV Outdoor Antenna Offers Range of up to 75 miles
ANTOP’s AT-402BV Outdoor Antenna consists of metal antenna dipole, directors, reflectors, low noise and anti-interference amplifiers. The antenna supports HDTV, 1080P TV and 4K ULTRA HD and multi-directional reception pattern. Unit is equipped with ANTOP’s Smartpass amplifier for correctly balancing short and long-range reception and a 4G filter to block wireless signals from phones and...
Read More »
Copper Infiltration Using Wrought Wire Infiltrant - Process and Productivity Improvements for Automotive Components
A comprehensive exploration of a new wrought copper alloy wire used in powder metallurgical infiltration methods.
Read More »
Thinkom Phased-Array Aero Antennas Ready Now for Low-Earth Orbit Satellites
ThinKom’s Patented Technology Supports Multi-Constellation, Multi-Orbit Interoperability HAWTHORNE, Calif. – May 31, 2018 – ThinKom Solutions, Inc. has announced that its phased-array antennas are fully interoperable with the next generation of low-earth orbit (LEO) and mid-earth orbit (MEO) networks as well as geostationary (GEO) satellites. Agility tests have shown that the company’s...
Read More »
New Dual Sector Antennas are Suitable Point-to-Multi-Point Applications
KP’s Dual Sector Antennas are made up of seven models each having two or more sector antennas. Units are available with four or eight ports and support 2 x 2, 4 x 4 and 8 x 8 MIMO. The straight-on model antennas feature two forward-facing 65° or 90° sector antennas in single randome and come with frequency combinations of 2GHz/3GHz, 2GHz/5GHz, 3GHz/5GHz or 5GHz/5GHz. The side-angle antennas...
Read More »
Multitest Announces OTA Testing Solution for 60 GHz UltraGig Single-Chip Integrated Antenna in Package
Multitest’s Over-the-Air Solution integrates xWave OTA Contactor with xWave patch antenna. xWave OTA Contactors can be used for testing of 76-81 GHz AiP automotive radar devices and 5G applications at 28 GHz and 39 GHz. The unit uses patented hybrid contacting technology that optimizes RF performance in cmWave and mmWave devices. The Contactors feature embedded patch antennas and coplanar...
Read More »
KP's Three Models under the New LTE Line are Optimized to Allow for Frequency Reuse
KP Performance Antennas introduced three 2-GHz sector antennas: KP-2DP120S-45, a 14 dBi sector with 120° azimuth beamwidth, the KPPA-2GHZDP60S-17-45, a 15.1 dBi sector with a 60° azimuth beamwidth, and the KPPA-2GHZDP90S-45, a 17 dBi sector with 90° azimuth beamwidth. Operating frequency range is between 2.3 GHz and 2.7 GHz and VSWR output varies from 1.3:1 to 2.1. Characteristic features...
Read More »
Linx Technologies's Introduces LTE Chip Antenna with New Design Saves Time and Labor Costs
Linx Technologies’s Latest LTE Chip Antenna comes with 37 mm x 5 mm dimension and is suitable for LTE, NB-IoT, and CAT-M1, applications. The antenna is operated in common 4G/3G/2G LTE bands and delivers an improved gain at 700 and 800 MHz bands. Unit’s latest design saves board space and cost of installation.
Read More »
Thinkom and Comsat Complete Successful Coast-To-Coast Demonstration of High-Speed Satellite Communication Links on the Move
ThinKom’s Ultra-Low-Profile ThinSat® 300 Phased-Array Satellite Antenna Enables Low-Cost, High-Quality Connectivity for Broadcast News Media and Other Applications HAWTHORNE, Calif., – April 5, 2018 – ThinKom Solutions, Inc. and COMSAT, Inc. recently partnered to complete a coast-to-coast expedition to test and validate a seamless end-to-end continuous high-speed satellite communication...
Read More »
ISO-Certified Precision Machining and Contract Manufacturing Services from DFF
DFF is an industry leading contract manufacturer specializing in medium to high production precision machined components and electromechanical assemblies. Our 100 CNC machining centers and design-assist capabilities ensure our customers' needs are always met. Check out our video to learn more.
Read More »
