Antennas

Antenna offers 100% read rate.
Identifiers

Antenna offers 100% read rate.

Model LRP2000-23 Mini provides 4 ft reading range when communicating with LRP-L90140S tags. Phillips I-Code SLI chip offers 112 bytes of memory. Reader/writer operates at frequency standard of 13.56 MHz. When 2 antennas are set up in gate configuration, tags can be read through 7 ft aisle at height up to 4 ft. Antenna can also be mounted alongside conveyor, to read multiple tags passing by on...

Read More »
Antennas

High-Gain Antennas extend range of wireless networks.

SMCANT-DIFP11 Wireless High-Gain 11dBi Flat Panel Antenna and SMCANT-LP Lightning Protector extend and protect 2.4 GHz wireless networks. Former consists of low-profile, wide dispersion directional antenna that extends point-to-point range up to 9 mi under optimal conditions. Useable with or without amplification, lightning protector provides surge protection to safeguard electronic equipment and...

Read More »
Antennas

Wireless LAN Antennas extend range and signal strength.

EZ Connect(TM) 2.4 GHz Omni-Directional Home Antenna (HMANT-40) and 2.4 GHz Directional Home Antenna (HMANT-60) are suited for 2.4 GHz WiFi network (802.11b, b+ or b/g) and offer plug-and-play functionality. Both can be setup on desktop or mounted to wall. HMANT-40EZ models bring 4 dbi of power to extend wireless network signals in all directions, and HMANT-60 models have 6 dbi of power to extend...

Read More »
Planar Antenna meets worldwide frequency allocations.
Antennas

Planar Antenna meets worldwide frequency allocations.

Splatch is offered in standard or custom frequencies of 300-900 MHz and utilizes proprietary grounded-line technique. Immunity to proximity effects makes it suitable for handheld applications such as remote controls, pagers, and alert devices. SMD package is appropriate for reflow or hand attachment. Antenna measures 1.1 x .5 x .062 in. and exhibits 50 ohm characteristic impedance and VSWR of...

Read More »
Horn Antenna offers 18 GHz frequency range.
Antennas

Horn Antenna offers 18 GHz frequency range.

Model BHA 9118 linearly polarized, broadband antenna can be used for both receiving and transmitting in chambers or open area test sites. N connector provides low voltage standing wave ratio. Field strength capability is 250 V/m @ 1 m, and typical gain is 5.5-15 dBi. Double-ridged guide horn antenna is corrosion resistant. Protective strips on 2 fiberglass sides of unit prevent accidental damage...

Read More »
Evaluation Kit rapidly assesses chip antenna.
Antennas

Evaluation Kit rapidly assesses chip antenna.

Model AEK-CHP-245-1 allows for evaluation of company's ANT-2.45-CHP antenna, suited for 2.4 GHz applications including 802.11, Bluetooth, Zigbee, and Home RF. Evaluation kit includes reference jig, which allows for immediate assessment of antenna's performance, and 5 additional antenna samples for use in design.

Read More »
Chip Antenna suits all 2.4 GHz applications.
Antennas

Chip Antenna suits all 2.4 GHz applications.

Antenna uses advanced multilayer LTCC Technology and proprietary hybrid spiral element. Compact SMD package measures 6.5 x 2.2 x 1.0 mm and is fully compatible with hand and reflow attachment processes. Electrical specifications include 50Â-½ characteristic impedance, unity gain with linear polarization, and usable bandwidth of 120 MHz with center frequency of 2,450 MHz. Applications include...

Read More »
Antenna features permanent mount package.
Antennas

Antenna features permanent mount package.

PML 902-928 MHz, 1/4 wave antenna is attached by placing its base through 1/4 in. hole in product and securing with nut or by threading it into PEM-style insert. Antenna is fed through base with RG-174 coax cable, which may be soldered directly to board or attached using 50-ohm connector. Base features articulating joint for 90° tilt.

Read More »
Antenna Elements offer expanded frequency range.
Antennas

Antenna Elements offer expanded frequency range.

Surface-mount patch antenna elements feature frequency range of 500 MHz to 6 GHz, allowing them to be used in mobile, portable, and handheld applications. Impedance is 50 Ohms. Units are temperature stable with low return loss and low frequency drift vs temperature. Sizes include: 13 x 13 x 3 mm, 18 x 18 x 4 mm, 25 x 25 x 4 mm, 27 x 27 x 6 mm, 37 x 37 x 4 mm, 50 x 50 x 3 mm, and 16 mm dia. x 6 mm.

Read More »
RF Test System coordinates components.
Test Systems Integration Services

RF Test System coordinates components.

Brainlink(TM) software and Series SC 1000 system controller connects and coordinates multiple pieces of RF test equipment, including 4 amplifiers, 4 antennas, 3 signal generators, 4 directional couplers, and spectrum analyzers or receivers. System enables range of emissions and susceptibility tests to be conducted without manually changing cable feeds or equipment settings. It automatically...

Read More »
Precision Machined Parts for High Tech Applications
Sponsored

Precision Machined Parts for High Tech Applications

For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.

Read More »

All Topics