Antennas

Antennas

Precision GPS Antennas operate in adverse environmental conditions.

As multi-GNSS (GPS L1/L2/L5, GLONASS L1/L2, Beidou, SBAS, OmniSTAR, and Galileo E1/E5a and b) antenna, A52 offers multipath mitigation, stable phase center, and SNRs that enable use in challenging environments such as near buildings and foliage. Used for aerial application guidance and flow control as well as mapping and surveying, A21 receives GPS L1, SBAS, and OmniSTAR L-band signals. It...

Read More »
Antennas

Omnidirectional Antenna features horizontal polarization.

Model ODH24-9-WB operates in 2,400-2,500 MHz band with 9 dBi gain and horizontal polarization, which increases range over flat surfaces and minimizes vertically polarized signals produced by electrical and wireless devices. Supplied in ASA enclosure, antenna integrates 50 ohm passive feed and comes standard with type N female connectors. It is designed for 2.4 GHz ISM band applications, 802.11...

Read More »
Antennas

Laird Technologies to Attend APCO 2010 Trade Show

Company to Showcase Antenna Solutions for Public Safety Communications Applications St. Louis, Missouri, USA - July 20, 2010 - Laird Technologies, Inc., a global leader in the design and supply of customized performance-critical components and systems for advanced electronics and wireless products, today announced it will be attending the Association of Public-Safety Communications...

Read More »
Wireless Deployment Kit restores emergency communications.
Data Links

Wireless Deployment Kit restores emergency communications.

Supplied as turnkey package, Trailblazer 4x4 Rapid Deployment Kit accelerates emergency replacement of severed communication lines for critical voice, voter receiver, and simulcast repeater systems. Fully integrated system - Trailblazer microwave radios, panel antennas, cables, and accessories - hastens deployment of wireless T1/E1 voice and data links. All components are NEMA 4x rated, and...

Read More »
Dual-Band Wi-Fi Antenna on 2.4 and 5.8 GHz ISM bands.
Antennas

Dual-Band Wi-Fi Antenna on 2.4 and 5.8 GHz ISM bands.

Wi-Fi Pro Dual Band Antenna withstands harsh, noisy, or electronically sensitive environments and provides 100% bandwidth across ISM band. Product achieves peak gain of 3.0 dBi and 50 W impedance and is omni-directional in free space. Withstanding temperatures from -55 to +85°C, linear antenna is also designed to meet IEEE802.11n-(x) standards. It measures 2 in. across and mounts via coax...

Read More »
Antenna Mounts

Compact In-Vehicle Mobile Antenna Mount integrates GPS.

Larsen brand new Motorola high-frequency mobile antenna mount has integrated active GPS antenna that provides coverage for vehicle tracking and location applications. Operating over frequency range of 27 MHz to 6 GHz, IP65-rated mount has input voltage of 3 or 5 Vdc and provides impedance matching at frequencies above 1 GHz. Device measures 4.5 x 2 x 0.7 in. and features mount center pin that...

Read More »
Belden Equips Hirschmann(TM) Access Points with HiLCOS 8.00 WLAN Firmware to Meet the New European 5 GHz Standard
Antennas

Belden Equips Hirschmann(TM) Access Points with HiLCOS 8.00 WLAN Firmware to Meet the New European 5 GHz Standard

HiLCOS 8.00 is Belden's new WLAN firmware that fulfills all the requirements of the new EN 301893 V1.5.1 standard, which regulates the operation of WLAN devices in 5 GHz environments.. With this new EN 301893 V1.5.1 WLAN standard, which will come into effect across Europe on July 1, 2010, the European regulatory authority ETSI is implementing more stringent requirements for dynamic frequency...

Read More »
Antennas

Penta-Band Plus GPS Antenna is intended for telematics.

Supplied in 136 x 38 x 14 mm package, W4120 Series active GPS antenna provides location-based information that can be communicated back to tracking location via wireless frequencies around world. Amplifier input voltage of 3 or 5 Vdc provides 26 dBic of gain and compatibility with receivers. IP67-rated housing is suitable for outdoor use, and operating range coves 5 frequency bands - 824-894 MHz,...

Read More »
Weatherproof External Antennas target 2.4 GHz applications.
Antennas

Weatherproof External Antennas target 2.4 GHz applications.

Built to handle ruggedized conditions, models W5001, W5010, and W5011 meet Bluetooth, WLAN, WiFi, IEEE 802.11b/g, ZigBee IEEE 802.15.4, and 2.4 GHz ISM band system standards. They offer IP65 water ingress protection in accordance with international standard IEC 60529, UV protection, and ability to withstand 100 mph wind loading. Measuring only 128 x 18 mm, antennas have max gain of 1.5 dBi in...

Read More »
Conical Horn Antennas feature frequency range of 4-26.5 GHz.
Antennas

Conical Horn Antennas feature frequency range of 4-26.5 GHz.

With gain of 16-25 dBi, Series 3163 Antennas are designed for use as feeds in tapered anechoic chambers, as well as in applications requiring high gain and linear polarization. Design allows for rotation inside conical feed sections when back-mounted and attached to rotator at feed of tapered chamber. Individually calibrated at 3 m per ANSI C63.5, Series includes C-band Model 3163-03, X-band...

Read More »

All Topics