New Dielectric Resonator Antenna Array Supports 37-40 GHz Frequency Bands
Combines patented SuperShape™ and DRA technology to achieve wide-band operation over the 24-30 GHz frequency bands. Demonstrates reduced scanning losses, low sidelobe levels and maximum scan angle. Achieves over 40 dBm of peak EIRP, which is ideal for use in customer-premise-equipment (CPE) products.
Read More »
New Wi-Fi 6 MIMO Antenna System Supports 4x4 5 GHz + 4x4 2.4/5 GHz Wi-Fi Configuration
Increases network capacity, extend range and reduce latency in enterprise networks. Enables size reduction of enterprise access-points by 20% or more, without sacrificing antenna system performance. Designed to support bandwidth intensive use cases in dense Wi-Fi deployments.
Read More »
New Wireless Communication Products Provide Encrypted Data Transfer for Distances up to 32 km Line of Sight
Series of 900 MHz communication transceivers, I/O modules and antennas are available for indoor (DIN rail) as well as outdoor (NEMA4) mounting. Enables to set up necessary support of analog and digital communication. Adjustable bit rates up to 500 kbps and signal gain up to 12 dBi.
Read More »
New GPS Timing Antennas and UHF Antenna Offers High Level of Performance and Durability
GPS/GLNSS antennas provide accurate reception of satellite timing signals and reference frequencies for use in advanced network applications. HG110TEL-BNC portable UHF antenna provides high performance in the UHF frequency range of 118-174 MHz. Features a telescopic radiator and flexible support mast.
Read More »
NVH Materials Guide
Noise, Vibration, and Harshness (NVH) refers to the study of noise and vibration for the purpose of modifying equipment for quieter, safer operation.
Read More »
New VeroStar GNSS Antenna Tallysman is IP69K Waterproof Rated
Features high radiating efficiency, GNSS and L-Band tracking, stable phase centre variation and axial ratio. Supports dual, triple and GNSS frequency coverage with or without L-band. Applications include survey, marine, aviation, agriculture and machine control.
Read More »
New Helical Antenna from Tallysman Comes in Housed and Embedded Options
Supports single, dual and triple GNSS frequency bands. Available in HC600, HC871 and HC872 models. Designed for high performance and versatility applications such as Unmanned Aerial Vehicles (UAV’s).
Read More »New S621 GNSS Survey Smart Antenna Processes and Supports Over 800 Channels
Available with two long-life lithium batteries supplying more than 12 hours of operation. Offers unprecedented access to additional BeiDou phase 3 satellites within your rover RTK solution. Designed for challenging environments and meets IP67 requirements.
Read More »
ThinKom Phased-Array Antennas Enable Satellite Connectivity for Indonesian Federal Police
ThinKom Partners with Skyreach, Heimdall and Newtec to Supply High-Speed Satcom Systems for Mobile Command Centers Hwathorne, Calif. – Sept. 10, 2019 – ThinKom Solutions, Inc. has supplied its ThinSat 300 flat-panel phased-array antennas for Indonesian Federal Police command center vehicles to access satellite broadband on the move. The project is a collaboration of ThinKom, Skyreach,...
Read More »
New 8-Port ProLine Sector Antenna Comes with 65 Degree Azimuth Beamwidth
Suitable for broad-frequency, point-to-point, point-to-multipoint and backhaul applications. Designed to deliver high, stable gain over wide bandwidths and suppress side-lobes for mitigating inter-sector interference. Features include 8 ports, dual band 2300-2700 MHz and 4900-6400 MHz frequency support, 17dBi gain, slant polarization, front to back ratio of 30-35dB and 0 degree electrical...
Read More »
New Multi-Beam Gateway Antenna Supports Multiple Moving LEO Satellites
Designed to accommodate current and next generation low-Earth-orbit (LEO) and medium-Earth-orbit (MEO) satellite constellations. Uses patented phased-array antenna technology. Track multiple satellites simultaneously with look angles between 5 and 90 degrees in elevation and full 360-degree coverage in azimuth.
Read More »
How SpinSelect Can Save You Time and Money
Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.
Read More »
