New Molex Antennas from Helind Comes with Bluetooth/Wi-Fi Technology
The Molex Antennas are suitable for IoT (Internet of Things), automotive, industrial and medical applications. The antennas are offered in multiple form factors with technologies such as Bluetooth/Wi-Fi, GNSS, combo, cellular and NFC. They are used across IoT products in consumer, commercial, industrial and infrastructural spaces.
Read More »
Tallysman Introduces High Accuracy VC6100 VeraChoke Antenna
Tallysman has extended their line of high performance GNSS antennas with their VC6100 VeraChoke choke ring antenna. The antenna offers a choice in form-factor for reference and monitoring applications and shares a high efficiency element design with its counterpart VeraPhase. The rings have been optimized for all GNSS signals and are a pyramid shape in order to improve reception. VC6100 has the...
Read More »
New ESP Series Microwave Antennas are Suitable for Unlicensed Band Applications
The ESP Series Microwave Antennas are offered in 2, 3 and 4-ft configurations. The units come with improved Front-to-Back ratio and isolation to increase immunity. These antennas are designed with robust and rugged design and deliver good side lobe performance.
Read More »
New Proline Antennas are Suitable for Point-to-Multipoint and Backhaul Applications
The Proline Antennas are available in parabolic and sector models. The parabolic antennas are offered in 1 and 2 ft diameters with gain performance of 24 dBi and 29 dBi respectively. The sector and parabolic units are designed with single and dual-band options such as 2.3-2.7 GHz, 3.5-4.2 GHz and 4.9-6.4 GHz for 2x2, 4x4 and 8x8 MIMO. The sector antennas provide stable gain over wide bandwidths...
Read More »
Seal Stuff In, Seal Stuff Out
One of the best ways to make sure that your machinery stays up and running in the face of adversity is to make sure that it's properly sealed. Of course, it's not always easy to determine whether the integrity of your seals are up to par. How can you tell when you have a problem?
Read More »
Thinkom Successfully Demonstrates First Aero Terminal Connectivity with SES' O3b MEO Satellites
In-Flight Demo Trials to Follow in Coming Months HAWTHORNE, Calif. – Sept. 25, 2018 – ThinKom Solutions, Inc. today announced the successful completion of the first ground test of its ThinAir® Ka2517 Ka-band phased-array satellite antenna with the SES’ O3b constellation of medium-Earth orbit (MEO) satellites. The test was conducted in August 2018 at ThinKom’s facility in Hawthorne,...
Read More »
SensThys Offers SensRF-101 Antenna with Mounted SMA Connector
The SensRF®-101 9dBic Antenna is available in 10 x 10 in. form-factor with a thickness of 0.8 in. The unit can be used with RFID reader and is offered with through-hole flush mount or a VESA 100mm stud mount. It is suitable for use in offices or commercial environments and can be provided with custom logos or graphics.
Read More »
Tallysman Launches Magnetic Mount L1/L5 Antenna for Precision Dual Frequency Positioning Applications
Tallysman’s TW7875 Magnetic Mount L1/L5 Antenna is offered in a magnetic mount IP67 rated housing. The TW7875 is embedded with Accutenna® technology that offers improved multi-path signal rejection because of its low axial ratio across the full bandwidth. The unit is suitable for applications such as agriculture and autonomous vehicles. TW7875 provides linear phase response and tight Phase...
Read More »
New mmWave Antenna Modules Can be Paired with Snapdragon X50 5G Modem
Qualcomm’s mmWave Antenna Modules consist of 5G NR millimeter wave (QTM052) and sub-6 GHz RF (QPM56xx) models. The units are designed for smartphones and mobile devices. QTM052 supports up to 800 MHz of bandwidth in the 26.5-29.5 GHz, 27.5-28.35 GHz and 37-40 GHz mmWave bands. QPM56xx family consists of QPM5650, QPM5651, QDM5650, and QDM5652 models. The sub-6 GHz RF modules provide integrated...
Read More »
New MON Series LTE Antenna Offers Higher Efficiency at Lower Frequency Bands
Linx Technologies introduces the cost effective MON series LTE antenna with tilt and swivel joint design for optimum performance in the product. The 4 cm tall external antenna can also fold against the enclosure for shipping or transport. This easy to implement antenna features durable and versatile design to reduce any damage from the impact forces.
Read More »
New HDP and VDP Series Antennas Come with Horizontal or Vertical Cable Egress
Linx’s HDP and VDP Industrial Antennas are designed for applications such as Dual-Band WiFi, NB-IoT, CAT-M1, 868 and 916 MHz. Units can be located remotely from the radio using two meter low loss cable. The antennas are compliant to IP67 and UV standards and can be mounted to non-conductive surfaces using an integrated PSA adhesive patch.
Read More »
Trotec Laser Offers Customizable Industrial Laser Marking Solutions for Any Application
Trotec's laser marking solutions provide your company with configurable workstations and intuitive, customizable software. Check out our video to learn more.
Read More »
