New Parabolic Antennas Deliver SISO or 2x2 MIMO
ProLine 11 GHz parabolic antennas operate in the 10.7 GHz to 11.7 GHz frequency range. Deliver gain performance of 34.4 dBi and 39 dBi respectively. Ideal for high-density, point-to-point backhaul applications or client-premises.
Read More »
New KGEA Mid-Range LF Magnetic Field Antenna Available in 168mm L x 16mm W x 11,65mm H
Available with mechanical, electrical performance and optimized size for LF emitter antennas for automotive RFID. Covered with thermoplastic HPM technology using a PREMO patented technique. Ideal solution that embodies an optimization of reading distance, sensitivity, mechanical robustness and IP waterproof issue.
Read More »
New ProLine Polarized Sector Antenna Features 65-Degree Azimuth Beamwidth
Operates in the 2.3 GHz to 2.7 GHz and 4.9 GHz to 6.4 GHz frequency ranges. Offers 8 ports, gain performance of 17 dBi and 16.8 dBi respectively, and front-to-back of 31 dB and 34 dB. Ideal for broad-frequency, point-to-point, point-to-multipoint and backhaul applications.
Read More »
New Flat Panel TVWS Antenna Provides High Gain of 9 dBi
KP-TWDPFP9 antenna operates in the 470 MHz - 698 MHz range. Includes H/V dual polarization and a pole mounting bracket with up or down tilt adjustment. Compatible with any connectorized TVWS radio, including RDL3000 Ellipse series with a direct mount option.
Read More »
How to Choose a Servo Controller for Your Application
Choosing the best controller for your specific application is of the utmost importance. This white paper offers an overview of feature and motion profile considerations.
Read More »
New 4-Port OMNI Antenna Supports One 4x4 MIMO or Two 2x2 MIMO Radios
Delivers OMNI performance with 13 dBi of gain and capable of delivering increase capacity offered by 4x4 MIMO. Provides horizontal/vertical polarization and operates on the 5.15-5.85 GHz frequency range. Features two vertically stacked OMNI arrays in a single radome enclosure with one mounting point.
Read More »
ThinKom Completes First-Ever In-Flight MEO-GEO Satellite Roaming Tests
Ka2517 Phased-Array Aero Antenna Demonstrates Seamless Beam-to-Beam and Inter-Constellation Handover with SES’ MEO and GEO Satellites HAWTHORNE, Calif. – Oct. 23, 2019 – ThinKom Solutions, Inc. has completed a series of very successful in-flight connectivity tests of its Ka-band antenna on SES’ O3b medium-Earth orbit (MEO) and geostationary (GEO) satellites. The tests provided the first...
Read More »
New Dielectric Resonator Antenna Array Supports 37-40 GHz Frequency Bands
Combines patented SuperShape™ and DRA technology to achieve wide-band operation over the 24-30 GHz frequency bands. Demonstrates reduced scanning losses, low sidelobe levels and maximum scan angle. Achieves over 40 dBm of peak EIRP, which is ideal for use in customer-premise-equipment (CPE) products.
Read More »
New Wi-Fi 6 MIMO Antenna System Supports 4x4 5 GHz + 4x4 2.4/5 GHz Wi-Fi Configuration
Increases network capacity, extend range and reduce latency in enterprise networks. Enables size reduction of enterprise access-points by 20% or more, without sacrificing antenna system performance. Designed to support bandwidth intensive use cases in dense Wi-Fi deployments.
Read More »
New Wireless Communication Products Provide Encrypted Data Transfer for Distances up to 32 km Line of Sight
Series of 900 MHz communication transceivers, I/O modules and antennas are available for indoor (DIN rail) as well as outdoor (NEMA4) mounting. Enables to set up necessary support of analog and digital communication. Adjustable bit rates up to 500 kbps and signal gain up to 12 dBi.
Read More »
New GPS Timing Antennas and UHF Antenna Offers High Level of Performance and Durability
GPS/GLNSS antennas provide accurate reception of satellite timing signals and reference frequencies for use in advanced network applications. HG110TEL-BNC portable UHF antenna provides high performance in the UHF frequency range of 118-174 MHz. Features a telescopic radiator and flexible support mast.
Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.
Read More »
